WERNER 32' 300# 1-A F/GLS EXT/LADDERS WER D-6232-2
The D6332-2 fiberglass extension ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300 pounds, the D6332-2 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D-rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories. Note: image displayed is D6328-2 28 ft type IA fiberglass D-rung extension Ladder.
-
BrandWERNER®
-
UPC051751033113
-
Manufacturer Part NumberD6332-2
-
CountryUSA
-
Load Capacity300 lb
-
MaterialFiberglass
-
Rail TypeNon-Conductive/Interlocking
-
Maximum Working Length29 ft
-
TypeD-Rung Multi-Section
-
ANSI CodeType IA
-
Section Length16 ft
-
SeriesD6300-2
-
Outside Shoe Base Width19 in
-
Overall Length32 ft
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- 1-5/8 in slip resistant TRACTION-TRED® D-rungs
- Smooth operating pulley with polypropylene rope
- Interlocking side rails with internal rail guides on bottom of fly section securely connect rails
- External guides at top of base section securely interlock rails
- Heavy duty extruded rung locks are spring loaded to operate smoothly
- Pre-pierced holes for easy field installation of accessories
- Base and fly separate easily to use base section as single ladder
- Combination rail shield bracket and shoe with SHU-LOK® and slip resistant pad
- Molded rung braces on bottom step for increased durability
- Mar resistant molded end caps
- 31 ft H reach
- 29 ft L maximum open extended
- Slip resistant pad foot material
- 2 section x 16 rungs
- 16 ft L approximate closed
- 3-5/16 in rails
- 1-3/16 in flange
- 1-5/8 in rung
- 16 in W fly
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Compliant
Recently Viewed
The D6332-2 fiberglass extension ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300 pounds, the D6332-2 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D-rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories. Note: image displayed is D6328-2 28 ft type IA fiberglass D-rung extension Ladder.
GBV1630 by Coilhose | Vacuum Gauge | 2-1/2" Dial Size | 1/4" Bottom Mount | 0-30 PSI
Part Number: 23742 (also labeled as 23742-CR or SKF 23742)Inside Diameter (Shaft Size): 2.375 inches (2-3/8")Outside Diameter (Bore Size): 3.371 inches (some specs list up to 3.376")Width: 0.438 inches (7/16")Design Type: CRWH1 (Features a double steel case, carbon steel garter spring, and a specialized SKF WAVE lip)Material: Nitrile Rubber (NBR) lipTemperature Range: -40°F to 212°F (-40°C to 100°C)Outer Coating: Bore Tite Coating (a green sealant coating that helps fill minor imperfections in the housing bore)
6' NYLON ROPE LOCKING SNAP LANYARD-SAF3112 >
3' ROPE LANYARDS WITH SNAPS-SAF3110>
Makita® 194368-5 Guide Rail, For Use With Makita® XPS01, XPS02, SP6000, SP6000K/K1, SP6000J/J1 Plunge Circular Saws
The Makita® 55 in plunge saw Guide Rail (194368-5), when used with a Makita® plunge circular saw (SP6000) is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the plunge saw (not included) to provide smooth, dead-on straight cuts. For use with the Makita® 6-1/2 in plunge circular saws (models SP6000K/K1 and SP6000J/J1).
