2-TON L-90 20' - LIFT CHAIN HOISTS JET101320
JET® L-100 Series Hand Chain Hoist is designed with all steel construction and integrates safety, durability and innovation enabling it to operate in the most demanding industrial environments. Safety features such as the slip clutch style overload protection prevents the hoist from lifting damaging loads beyond its rated capacity. The JET® exclusive innovation showcased in the patented fused brake system reduces maintenance costs and limits downtime. JET® is so confident in the durability of the fused brake design we back it with an industry leading lifetime replacement warranty. The JET® L-100 is available in ¼ ton to 20 ton capacities and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). Regardless of how harsh the environment, the JET® L-100 Series Hand Chain Hoist is engineered to perform.
-
BrandJET®
-
UPC731325171792
-
Manufacturer Part NumberJT9-206121
-
CountryUSA
-
Load Capacity2 ton
-
Pull to Lift Rated Load79 lbf
-
SeriesL-100
-
Brake TypeDual Pawl Weston
-
Lifting Height20 ft
- Durability, Weston style dual pawl brake system double pawl design increases safety
- Slip clutch design increases safety and overload protection by preventing lifting or pulling damaging loads
- Industrial rated hooks rotate 360 degrees for easy rigging, hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
- Load plates are heat treated, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments
- Sealed ball bearing design increases efficiency and promotes smooth operation
- Patented fused brake design proven durability that increases safety with a lifetime replacement warranty
- Cast steel safety latches offer increased durability with heavy duty safety latches secured with Allen screws and lock nuts
- 70 ft hand chain overhaul to lift load 1ft
- 1 number of fall
- 14-3/4 in headroom
- 8 x 24 mm load chain
-
Alternative Part Number206121
-
UNSPSC24101600
-
Standards/ApprovalsANSI/ASME B30.16 and HST-2 Standards|OSHA Regulations
Recently Viewed
JET® L-100 Series Hand Chain Hoist is designed with all steel construction and integrates safety, durability and innovation enabling it to operate in the most demanding industrial environments. Safety features such as the slip clutch style overload protection prevents the hoist from lifting damaging loads beyond its rated capacity. The JET® exclusive innovation showcased in the patented fused brake system reduces maintenance costs and limits downtime. JET® is so confident in the durability of the fused brake design we back it with an industry leading lifetime replacement warranty. The JET® L-100 is available in ¼ ton to 20 ton capacities and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). Regardless of how harsh the environment, the JET® L-100 Series Hand Chain Hoist is engineered to perform.
CRC® 02016 CO® Non-Flammable Contact Cleaner, 16 oz Aerosol Can, Faint Sweetish Odor/Scent, Clear, Volatile Liquid Form
Formula contains no known ozone depleting substances or VOCs. The non-flammable, plastic safe formula is an optimal alternative to CFC, HCFC and flammable contact cleaners. NSF K2 Registered.
Smith Bearing® SMITH-TRAX® VCR-2-1/2 Heavy Duty Stud Type Deep Groove Ball Bearing Track Roller, 2-1/2 in Dia x 1-5/16 in W Roller, 1-1/2 in Dia Point, 3/4 in Dia x 1-3/4 in L Stud
VCR series bearings are designed to handle both axial and radial loads by using tapered roller bearings or deep groove ball bearings. These bearings should be used when standard needle roller bearings are not sufficient to handle the thrust load found in certain applications.
Knipex® 86 05 180 SBA Pliers Wrench, 40 mm Nominal, Chrome Vanadium Electric Steel Parallel/Smooth Jaw, 180 mm OAL
Knipex® 86 05 180 SBA Pliers Wrench, 40 mm Nominal, Chrome Vanadium Electric Steel Parallel/Smooth Jaw, 180 mm OAL
3/4" LINEAR BEARINGS-INAKBZ12>
Coilhose® 600-S Blow Gun, Safety Tip, 150 psi Working, 1/4 in FNPT Inlet x 1/8 in FNPT Outlet Thread, Die Cast Zinc, Import
The 600 series blow guns are a thumb lever style blow gun with an ergonomic shape and accept all Coilhose® 1/8 in tips. User comfort was designed into the 600 series with the elimination of the valve where the user's fingers are placed. Models that are designated as "safety" conform to OSHA standards for noise levels (1910.95) and 30 psi dead end pressure (1910.242B).
