1-TON 10'-LIFT MANUAL CHAIN HOISTS JET102100
Jet® L-100 series hand chain hoist integrates safety, durability and innovation enabling it to operate in the most demanding industrial environments. Safety features such as optional overload protection prevents the hoist from lifting damaging loads beyond its rated capacity. The Jet® exclusive innovation showcased in the patented fused brake system reduces maintenance costs and limits down time Jet® is so confident in the durability of the fused brake design we back it with an industry leading lifetime replacement warranty. The Jet® L-100 is available in 1/4 ton to 20 ton capacities and standard lifts of 10, 15, 20 and 30 feet (custom lifts available). Regardless of how harsh the environment, the Jet® L-100 series hand chain hoist is engineered to perform.
-
BrandJET®
-
UPC662755995439
-
Manufacturer Part NumberJT9-102100
-
CountryUSA
-
Load Capacity1 ton
-
Pull to Lift Rated Load64 lb
-
Minimum Between Hooks11-5/8 in
-
SeriesL-100
-
Dimensions9.06 in L x 7.28 in W x 8.66 in H
-
Brake TypeDual Pawl Weston
-
Lifting Height10 ft
- Weston style dual pawl brake system- double pawl design increases safety
- Alloy steel hooks industrial rated hooks rotate 360 deg for easy rigging
- Hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Sealed ball bearing design increases efficiency and promotes smear operation
- Cast steel safety latches increased durability with heavy duty safety latches secured with allen screws and lock nuts
- Heat treated load plates, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments
- Grade 100 load chain corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
- All steel construction impact resistant covers that provide durability and protection
- Compact design smaller body and lightweight design for low headroom applications and use in confined areas
- Certification- load tested to 125% of capacity with certificate
- 43 ft chain overhaul
-
Alternative Part Number102100
-
UNSPSC24101602
-
Standards/ApprovalsANSI/ASME B30.16
-
Owners/User Manual
-
Specification Sheet
Recently Viewed
Jet® L-100 series hand chain hoist integrates safety, durability and innovation enabling it to operate in the most demanding industrial environments. Safety features such as optional overload protection prevents the hoist from lifting damaging loads beyond its rated capacity. The Jet® exclusive innovation showcased in the patented fused brake system reduces maintenance costs and limits down time Jet® is so confident in the durability of the fused brake design we back it with an industry leading lifetime replacement warranty. The Jet® L-100 is available in 1/4 ton to 20 ton capacities and standard lifts of 10, 15, 20 and 30 feet (custom lifts available). Regardless of how harsh the environment, the Jet® L-100 series hand chain hoist is engineered to perform.
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
MasterDrive Q2-1.15/16 Q2 Series Double Split Tapered Bushing, 1.93 in Dia Bore, 2-7/8 in Dia Barrel, 4-1/8 in Dia Flange, 3-1/2 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
Nice® 5418VMF53 5000® Round Bore Unground Flanged Radial Ball Bearing, 1 in Dia Bore, 2 in OD, 1 Row, 0.718 in W, 757 lb Load
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
Bando Synchro-Link® P32-5M-25 Type 6F High Torque Flanged Timing Belt Pulley, 1/2 in MPB Bore, 1.96 in OD, 2.005 in Dia Pitch, 1.23 in W Face
Bando Synchro-Link® Timing Belt Pulleys are manufactured to exacting tolerances to assure total drive system compatibility. They are available in a complete range of sizes, types, configurations and materials to contribute to the efficiency, economy and performance of your drive.
1/2" TWECO STYLE MIG WELDER NOZZLE - Fits Tweco® and Clarke® style MIG guns - Suitable for medium-duty applications
