Jet Tools 5-TON 10'-LIFT HAND CHAIN HOISTS JET 105510
Jet® L-100 series hand chain hoist integrates safety, durability and innovation enabling it to operate in the most demanding industrial environments. Safety features such as optional overload protection prevents the hoist from lifting damaging loads beyond its rated capacity. The Jet® exclusive innovation showcased in the patented fused brake system reduces maintenance costs and limits down time Jet® is so confident in the durability of the fused brake design we back it with an industry leading lifetime replacement warranty. The Jet® L-100 is available in 1/4 ton to 20 ton capacities and standard lifts of 10, 15, 20 and 30 feet (custom lifts available). Regardless of how harsh the environment, the Jet® L-100 series hand chain hoist is engineered to perform.
-
BrandJET®
-
UPC662755947049
-
Manufacturer Part Number105510
-
CountryUSA
-
Load Capacity5 ton
-
Pull to Lift Rated Load75 lb
-
Minimum Between Hooks23-5/8 in
-
SeriesL-100
-
Dimensions19.8 in L x 13.27 in W x 10.61 in H
-
Brake TypeDual Pawl Weston
-
Lifting Height10 ft
- Weston style dual pawl brake system- double pawl design increases safety
- Alloy steel hooks industrial rated hooks rotate 360 deg for easy rigging
- Hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Sealed ball bearing design increases efficiency and promotes smear operation
- Cast steel safety latches increased durability with heavy duty safety latches secured with allen screws and lock nuts
- Heat treated load plates, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments
- Grade 100 load chain corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
- All steel construction impact resistant covers that provide durability and protection
- Compact design smaller body and lightweight design for low headroom applications and use in confined areas
- Certification- load tested to 125% of capacity with certificate
- 198 ft chain overhaul
-
Alternative Part NumberL-100-500-10
-
UNSPSC24101602
-
Standards/ApprovalsANSI/ASME B30.16
-
Specification Sheet
-
Owners/User Manual
Recently Viewed
Jet® L-100 series hand chain hoist integrates safety, durability and innovation enabling it to operate in the most demanding industrial environments. Safety features such as optional overload protection prevents the hoist from lifting damaging loads beyond its rated capacity. The Jet® exclusive innovation showcased in the patented fused brake system reduces maintenance costs and limits down time Jet® is so confident in the durability of the fused brake design we back it with an industry leading lifetime replacement warranty. The Jet® L-100 is available in 1/4 ton to 20 ton capacities and standard lifts of 10, 15, 20 and 30 feet (custom lifts available). Regardless of how harsh the environment, the Jet® L-100 series hand chain hoist is engineered to perform.
Dichtomatik 75102136 O-Ring, 214 Dash Number, 0.984 in ID x 1.262 in OD, FKM, 75 Shore A Durometer, Import, Custom 214-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Make fast, clean cuts on steel pipes 1/8 to 2-inches in diameter. The Model 202 two-wheel heavy duty pipe cutter features extra-wide rolls for true tracking and cleaner cuts. The wide rolls are also designed for use with power drives.
JASSPA2800>
Dichtomatik N70350 O-Ring, 350 Dash Number, 4.6 in ID x 5.02 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Proto® TorquePlus™ J54206 Socket Set, ASME B107.5M, 12 Points, 1/2 in Drive, 15 Pieces, Included Socket Size: 10 to 24 mm
