1077-A-14 MARS AIR SYSTEMS
36" 115-VOLT AIR CURTAIN - MCM1077A14>
Recently Viewed
36" 115-VOLT AIR CURTAIN - MCM1077A14>
WERNER® D1524-2 D1500-2 D-Rung Multi-Section Extension Ladder, 24 ft OAL, 300 lb Load, 12 in Adjustable Increments, Aluminum, Type IA
The D1524-2 aluminum extension ladder has a duty rating of 300 lbs and has extra heavy duty I-Beam side rails. The base and fly sections separate easily and can be used separately. Guide brackets help to ease operation when raising and lowering the fly section. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. TRACTION-TRED® D-rungs are slip resistant, and the rugged shoes rest flat or are held in spur position with the SHU-LOK® feature. Rugged spring loaded locks operate smoothly. Mar resistant end caps protect the surface ladder is resting against.
Lift-All® Tuflex™ EN60X12 Endless Round Sling, 12 ft L, 5300 lb, Polyester, Green
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
Lift-All® Tuflex™ EN150X10 Endless Round Sling, 10 ft L, 13200 lb, Polyester, Red
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
6" STORAGE HOOK-NTL221028 >
NACHI 21309EXQW33C3 Spherical Roller Bearing With Cylindrical Bore, 45 mm Dia Bore, 100 mm OD, 2 Rows, 25 mm W, 150000 N Dynamic/124000 N Static Load
Double-rowed spherical roller bearings are the workhorse of the industry. Their barrel shaped rollers and spherical outer ring raceway permits this bearing to operate with misalignment with no reduction in bearing life. Spherical roller bearings are used mostly in heavy duty industrial applications where extreme radial loads exist. They also excel in handling axial loads in either direction, contaminated environments, misalignment, shock loads and vibration. Nachi Sphericals are manufactured in a number of design and material configurations depending upon the type of application and the size of the bearing. Most come standard with a lubrication groove and holes (W33) on the OD of the outer ring. Symmetrical or Asymmetrical (A) rollers may be used with stamped steel or machined brass cages. The "EX" design uses larger diameter rollers for the highest load ratings. All bearings are heat stabilized to at least 200 deg C (about 400 deg F). Some sizes may be available with tapered bores (K). Depending upon design, stamped steel or machined brass cages are used. Commonly used in gearboxes, wind turbines, pumps, mining/construction, marine propulsion and drilling equipment.
