Justrite® 28270 Drum Dolly, 55 gal Drum, 27 in OD, 5-1/4 in H
Steel Drum Dolly offers a simple way to make vertical drums portable, and allows for easy repositioning of heavy drums. Platform is generously sized to accommodate Single Drum Collection Center No. 28268, Overpack No. 28201, or a 55-gallon (200L) drum.
-
BrandJustrite®
-
UPC697841011779
-
Manufacturer Part Number28270
-
CountryUSA|Canada
-
Caster TypePlastic
-
MaterialSteel
-
ColorGray
-
Height5-1/4 in in
-
Outside Diameter27 in in
- Move vertically stored drums with this steel dolly
- Generously sized platform accommodates 55-gallon (200-L) drums and Justrites single-drum collection station
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 5LTP7 |
| Fastenal | 99319661 |
-
UNSPSC24101503
-
Package DescriptionEACH
Recently Viewed
Steel Drum Dolly offers a simple way to make vertical drums portable, and allows for easy repositioning of heavy drums. Platform is generously sized to accommodate Single Drum Collection Center No. 28268, Overpack No. 28201, or a 55-gallon (200L) drum.
1/4" X 1/4" Stainless Steel Socket Head Set Screws
HARD FACING ROD 1#-MAQM55769 >
Fluke® 80PK-24 Air Temperature Probe, -40 to 816 deg C, 12 in L Wire
Stanley Proto J5239-45W 3/8-Inch Drive Torx Bit Socket, T45-PROJ523945W
Double-rowed spherical roller bearings are the workhorse of the industry. Their barrel shaped rollers and spherical outer ring raceway permits this bearing to operate with misalignment with no reduction in bearing life. Spherical roller bearings are used mostly in heavy duty industrial applications where extreme radial loads exist. They also excel in handling axial loads in either direction, contaminated environments, misalignment, shock loads and vibration. Nachi Sphericals are manufactured in a number of design and material configurations depending upon the type of application and the size of the bearing. Most come standard with a lubrication groove and holes (W33) on the OD of the outer ring. Symmetrical or Asymmetrical (A) rollers may be used with stamped steel or machined brass cages. The "EX" design uses larger diameter rollers for the highest load ratings. All bearings are heat stabilized to at least 200 deg C (about 400 deg F). Some sizes may be available with tapered bores (K). Depending upon design, stamped steel or machined brass cages are used. Commonly used in gearboxes, wind turbines, pumps, mining/construction, marine propulsion and drilling equipment.
