Campbell® T4900624 Cold Shut, 3/8 in Trade, 1900 lb Load, Mild Steel, Zinc Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
-
BrandCampbell®
-
UPC020418201455
-
Manufacturer Part NumberT4900624
-
CountryUSA|Canada
-
Load Capacity1900 lb
-
FinishZinc Plated
-
MaterialMild Steel
-
Trade Size3/8 in
- Connections for Chain and Attachments
- When Using Cold Shuts with Chain, Use One Size Larger Than Chain Size
- With A Hammer, Drive the Open End Through the Cold Shut Eye
- Peen the Extended End to Prevent Opening
- Note - Cold Shuts Should Not Be Reused After Closure Has Been Made
- Do not exceed the working load limit
- Do not use for overhead lifting or hoisting
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 24F410 |
| MSC | 67787481 |
-
UNSPSC31151609
-
Package DescriptionEACH
-
Catalog
Recently Viewed
Campbell® T4900624 Cold Shut, 3/8 in Trade, 1900 lb Load, Mild Steel, Zinc Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
Power transmission systems do more than operate at constant speeds with constant outputs. Customers increasingly need variable speed systems to regulate the speed and rotational force, or output torque, of critical mechanical equipment. Our Multi-Speed belts are engineered for efficiency, energy savings and increased productivity at a wide range of speeds and speed ratios.
Nylatron bearings are used as support bearings for drive and screw conveyor shafts. This self-lubricating hanger bearing can withstand temperatures up to 250 deg F and is compatible with 220 and 19B style hangers. It is recommended for grain, feed and chemical handling applications due the very low load capacity attribute.
Campbell® T4900824 Cold Shut, 1/2 in Trade, 3700 lb Load, Mild Steel, Zinc Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
