Peerless 5041654 Domestic Welded Transport Chain, Straight Link, 1/2 in Trade, 70 Grade, 100 ft L, 11300 lb Load
Transport chain is considered the chain of choice for load binding applications. It is also well suited for tie-downs, towing and logging operations. Engineered for maximum strength, this domestic transport chain is made from heat treated carbon strength steel. Heat treatment is associated with increased steel strength which improves product performance. Its strength to weight ratio exceeds that of proof coil and high-test. This chain meets department of transportation regulations and is permanently stamped with its working load limit every ten links. Order unit is foot. Not for overhead lifting.
-
BrandPeerless
-
UPC042228012731
-
Manufacturer Part Number5041654
-
CountryUSA
-
Link TypeStraight
-
Load Capacity11300 lb
-
FinishYellow Chromate
-
MaterialCarbon Steel
-
Trade Size1/2 in
-
TypeDomestic Welded
-
Grade70
-
Length100 ft
- Extremely strong for its light weight and is used primarily for load binding in the transportation industry
- Permanently marked, every ten links are stamped with the chain's working load limit and its grade
- This transport chain's strength to weight ratio exceeds that of proof coil and high-test
- Made from heat treated carbon strength steel - heat treating is associated with increasing steel strength with improves product performance
- Made in USA, this high quality transport chain is considered the leading choice for load binding applications
- Made to short link specs
- High strength to weight ratio is achieved by special heat treating
- It resists wear because of its exceptional hardness properties
- Transport chain meets Department of transportation regulations
- Not for overhead lifting
- 1.782 in L x 0.75 in W inside
- 0.51 in Dia
- 7 links per foot
- Packaged in half drum
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 48RN99 |
-
UNSPSC24101600
-
Package Description1/PK
-
Standards/ApprovalsDNV|OSHA 1910.184|NACM Certified|NACM Standard|PROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
-
Warranty12 Months
-
Catalog
-
Specification Sheet
Recently Viewed
Peerless 5041654 Domestic Welded Transport Chain, Straight Link, 1/2 in Trade, 70 Grade, 100 ft L, 11300 lb Load
Transport chain is considered the chain of choice for load binding applications. It is also well suited for tie-downs, towing and logging operations. Engineered for maximum strength, this domestic transport chain is made from heat treated carbon strength steel. Heat treatment is associated with increased steel strength which improves product performance. Its strength to weight ratio exceeds that of proof coil and high-test. This chain meets department of transportation regulations and is permanently stamped with its working load limit every ten links. Order unit is foot. Not for overhead lifting.
SDS Plus 2 Cutter Drill Bits have a strong tapered core to help resist flute breaks, especially when drilling deep holes. For optimal drilling speeds, the two-stage flute design features a variable helix pattern that quickly moves debris away from the contact zone. Plus, the two sharp, carbide-cutting edges deliver clean, round holes for secure anchor installation. These bits are made in Germany and are GUARANTEED TOUGH so tough that we are offering a NO BREAK GUARANTEE*. If you have our bits, we have your back.
IKO LRT505840 Metric Series Inner Ring, 50 mm ID x 58 mm OD, 40 mm OAW, For Use With RNA6910 Machined Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Metric-type LRT series Inner Rings have shaft diameters from 5 to 440 mm.
Sloan® 3317003 R-1003-A Repair Kit, For Use With Regal® Flushometer, Domestic
Wilton® WL9-28825 Round Channel Combination Pipe and Bench Vise, 5 in Jaw Opening, 1/4 to 2-1/2 in Pipe, Cast Iron
Proudly made in the USA, the combination pipe and bench round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut, the combination pipe and bench round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly keeping debris out and lubrication in for a lifetime of smooth operation. For ultimate versatility, the combination pipe and bench vise is equipped with main jaws, pipe jaws and a machined anvil work surface.
Littelfuse® POWR-GARD® JLLS150 Current Limiting Fast Acting Fuse, 150 A, 600 V AC/300 V DC, 20/200 kA Interrupt, T Class, Cartridge Body
Space saving Class T fuses are the most compact fuses available in ratings above 30 A - less than one-third the size of comparable Class R fuses. When rated in accordance with the NEC, Class T fuses provide Fast Acting overload and short circuit protection for non-inductive circuits and equipment. Used in inductive circuits, the ampere rating of Class T fuses must be increased to prevent opening on inrush currents. In such instances, Class T fuses may provide only short circuit protection.
