Crosby® 1049610, A-338-1/4, Grab Hook, 1/4 in Trade, 4300 lb Load, 100 Grade, Clevis Attachment, Forged Alloy Steel
Crosby® 1049610 A-1358 Grab Hook, 1/4 in Trade, 4300 lb Load, 100 Grade, Clevis Attachment, Forged Alloy Steel
-
BrandCrosby®
-
UPC662547105688
-
Manufacturer Part Number1049610
-
CountryUSA
-
Load Capacity4300 lb
-
MaterialForged Alloy Steel
-
Trade Size1/4 in
-
Grade100
-
SeriesA-1358
-
Attachment TypeClevis
-
Suitable For Use WithGrade 100 and Grade 80 Chains
- Forged alloy steel is quenched and tempered
- Individually proof tested to 2-1/2 times the working load limit with certification
- each hook has a product identification code (PIC) for material traceability, along with the size and the name Crosby® and USA in raised letters
- Fatigue rated at 1-1/2 times the working load limit at 20000 cycles
- The use of A-1358 clevis grab hook will result in a 20% reduction in chain capacity
- When used to hook back to chain leg to form a choker, the angle of the choke must be 120 deg or greater
- When used as a chain shortener, minimize twist of chain and ensure chain is fully engaged in hook
- 3.88 in L x 2.54 in W
- 2.2 in reach
-
UNSPSC31162608
Recently Viewed
Crosby® 1049610, A-338-1/4, Grab Hook, 1/4 in Trade, 4300 lb Load, 100 Grade, Clevis Attachment, Forged Alloy Steel
Crosby® 1049610 A-1358 Grab Hook, 1/4 in Trade, 4300 lb Load, 100 Grade, Clevis Attachment, Forged Alloy Steel
PILLOBALL self-aligning Rod Ends can be used as link mechanisms in a variety of machines and are designed for easy installation.
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB144K>
MORSE® 15124 1437 General Purpose Screw Machine Drill, #41 Drill - Wire, 0.096 in Drill - Decimal Inch, HSS, Bright
Browning® Classical Gripbelt® 1025824 AK Series Type 1 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 2 in OD, 2 in (A)/1.46 in (3L) Dia Pitch, 21/32 in W Face
Browning® Classical Gripbelt® 1025824 AK Series Type 1 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 2 in OD, 2 in (A)/1.46 in (3L) Dia Pitch, 21/32 in W Face
• Shaft Diameter (Inside Diameter): 40.00 mm (1.575 inches)
• Housing Bore (Outside Diameter): 80.00 mm (3.150 inches)
• Seal Width (Thickness): 12.00 mm (0.472 inches)
