Zurn Water
Zurn® QickTite® QR4 Unassembled Ring, 3/4 in, CTS
Zurn® QickTite® QR2 Unassembled Ring, 3/8 in, CTS
Zurn® QickTite® QR1 Unassembled Ring, 1/4 in, CTS
Zurn® QickTite® QV514 Unassembled Hose Bibb Valve, 1/2 in, MNPT x Male Hose Thread
Zurn® QickTite® QV514 Unassembled Hose Bibb Valve, 1/2 in, MNPT x Male Hose Thread
Zurn® QickTite® QV504 Hose Bibb Valve, 1/2 in, FNPT x Male Hose Thread
Zurn® QickTite® QV504 Hose Bibb Valve, 1/2 in, FNPT x Male Hose Thread
Zurn® QickTite® QTP4T Unassembled Test Plug, 3/4 in, FNPT
Zurn® QickTite® QTP3T Unassembled Test Plug, 1/2 in, FNPT
Zurn® QickTite® QTC4F Unassembled Test Cap, 3/4 in, FNPT
Zurn® QickTite® QTC3F Unassembled Test Cap, 1/2 in, FNPT
Zurn® QickTite® QFNCR2 Nut-Ring-Cone Set, 1/2 x 3/8 in, Thread x CTS
Zurn® QickTite® QFNCR1 Nut-Ring-Cone Set, 1/2 x 1/4 in, Thread x CTS
Zurn® QickTite® QE43T Unassembled 90 deg Elbow Body, 1/2 x 3/8 or 1/4 in Nominal, CTS End Style
Zurn® QickTite® QE43T Unassembled 90 deg Elbow Body, 1/2 x 3/8 or 1/4 in Nominal, CTS End Style
Zurn® QickTite® QE32T Unassembled 90 deg Elbow Body, 3/8 or 1/4 x 3/8 in Nominal, CTS x MNPT End Style
Zurn® QickTite® QE32T Unassembled 90 deg Elbow Body, 3/8 or 1/4 x 3/8 in Nominal, CTS x MNPT End Style
Zurn® QickTite® QASE23F Assembled 90 deg Female Elbow, 3/8 x 1/2 in Nominal, CTS x FNPT End Style
Zurn® QickTite® QASE23F Assembled 90 deg Female Elbow, 3/8 x 1/2 in Nominal, CTS x FNPT End Style
Zurn® QickTite® QAE32 Assembled 90 deg Elbow, 1/2 x 3/8 in Nominal, CTS End Style
Zurn® QickTite® QAE32 Assembled 90 deg Elbow, 1/2 x 3/8 in Nominal, CTS End Style
Zurn® QDE33TF Unassembled Drop Ear Elbow Body, 3/8 or 1/4 x 1/2 in Nominal, CTS x FNPT End Style
Zurn® QickTite® QDE33TF Unassembled 90 deg Drop Ear Elbow Body, 3/8 or 1/4 x 1/2 in Nominal, CTS x FNPT End Style
Zurn® QickTite® QC55F Unassembled Female Coupling, 1 in Nominal, FNPT End Style
Zurn® QickTite® QC44F Unassembled Female Coupling, 3/4 in Nominal, FNPT End Style
Zurn® QickTite® QC4 Unassembled Cone, 3/4 in Nominal, CTS End Style
Zurn® QickTite® QC33TL Unassembled Nipple, 3/8 or 1/4 in, CTS
Zurn® QickTite® QC33T Unassembled Coupling, 3/8 or 1/4 in Nominal, CTS End Style
Zurn® QickTite® QC33F Unassembled Female Coupling, 1/2 in Nominal, FNPT End Style
Zurn® QickTite® QC2 Unassembled Cone, 3/8 in Nominal, CTS End Style
Zurn® QickTite® QC1 Unassembled Cone, 1/4 in Nominal, CTS End Style
Recently Viewed
BALL BEARINGS-NAC6013ZZE>
Milwaukee® 48-20-5030 Heavy Duty Thin Wall Core Bit, 1-3/4 in Drill - Fraction, 1.75 in Drill - Decimal Inch, Carbide
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
60-GRIT SANDING PAPER-BSHRS060>
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
Thread Kits 1208-108 Coarse Thread Repair Kit, 1/2-13 Internal, 304 Stainless Steel, 6 Pieces
Thread Kits 1208-108 Coarse Thread Repair Kit, 1/2-13 Internal, 304 Stainless Steel, 6 Pieces
2-TON RATCHETING PULLER - GRW3624>
