Werner Co
WERNER 4' 375# 1-AA F/GLS STEPLADDERS WER 7304
The 7304 fiberglass 4 ft step ladder has a duty rating of 375 pounds and features heavy duty aluminum HolsterTop. With a full set of horizontals and heavy duty internal spreaders, these ladders are built for the long haul. The molded external rail shields and the EDGE® bracing system help decrease damage to the rails. The slip resistant TRACTION-TRED® steps are single riveted and have extra wide knee braces. The Glas*Mark® violator stripes increase the visibility of the ladder on the jobsite. Fiberglass rails are non-conductive for working near electricity.
WERNER 4' 375# 1-AA F/GLS PODIUM LADDERS WER PD-7304
The PD7304 podium ladder offers the same reach height as a 6 ft step ladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra large platform with toe guard feels like you are standing on the ground and 4X work zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360™ gives the bottom of the ladder protection from every angle with integrated rail shield, edge bracing and over sized foot pads.
WERNER 4' 375# 1-AA ALUMINUM STEPLADDERS WER 404
The 404 aluminum 4 ft step ladder has a duty rating of 375 pounds and features heavy gauge TOOL-TRA-TOP®. All steps are knee braced and the TRACTION-TRED® steps are slip resistant. The rear rail is a full U channel and a full set of rear horizontals are spaced one per foot. The 14 ft and 16 ft models carry a duty rating of 300 pounds.
WERNER 4' 300# 1-A F/GLS TWIN STEPLADDERS WER T-6204
The T6204 Fiberglass 4 ft Twin Step Ladder offers a high performance dual HolsterTop with a paint and tool holder for convenience. The internal spreaders are heavy duty and the slip-resistant TRACTION-TRED® steps are all double riveted and knee braced. These twin stepladders allow 300 pounds per side making them Ideal for one or two-person jobs. The Edge® molded brace and foot pad combination provide bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
WERNER 4' 300# 1-A F/GLS STEPLADDERS WER 6204
The 6204 Fiberglass 4 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
WERNER 4' 300# 1-A F/GLS PODIUM LADDERS WER PD-6204
The new PD6204-4C podium ladder with factory installed casters for added mobility offers the same reach height as a 6 ft step ladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra large platform with toe guard feels like you are standing on the ground and 4X work zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed foot gives the bottom of the ladder protection from every angle with an integrated rail shield and over sized foot pads. The durable caster assembly with stainless steel spring, steel stem and ball bearing swivel eliminates the need for a separate brake. The 4 soft rubber casters allow for easy 360 deg mobility and designed to roll over thresholds.
WERNER 4' 300# 1-A ALUMINUM STEPLADDERS WER 374
The 374 aluminum 4 ft step ladder has a duty rating of 300 pounds yet is light weight and easy to transport. The Tool-Tra-Top® has a drill holster, convenient tray for tools/paint and small parts. There is also a sturdy molded paint can hanger on the backside of the top. The SPILL-PROOF® pail shelf has a rag rack and holds a gallon paint can and automatically closes with the ladder. There is a full set of horizontals on the rear section and the 4 ft, 5 ft and 6 ft models have a unique H spreader with hand grip for easy one handed carrying and closing. The TRACTION-TRED® steps are slip resistant and double riveted.
WERNER 4' 250# TY-1 F/GLS TWIN STEPLADDER WER T6004
The T6004 Fiberglass Multi-use Twin 4 ft Step Ladder allows for 250 pounds on either side making these ladders Ideal for two-person jobs. The high performance dual HolsterTop has a paint and tool holder adding productivity to the job. Back-up aluminum plates reinforce all top connectors and the TRACTION-TRED® steps are slip resistant. The PINCH-PROOF spreaders are externally located on the ladder and the Edge® molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
WERNER 4' 250# ALUM/PLATFORM TWIN LADDERS WER P-T-372
The PT372 aluminum 2 ft STOCKR'S LADDER® has a duty rating of 300 pounds per side and features a large platform that provides a secure and comfortable work area. The PINCH-PROOF™ platform is designed for easy opening and closing. TRACTION-TRED® slip resistant steps are on the front and rear sections making these ladders ideal for one or two person jobs. The heavy duty aluminum foot bracket secures the slip resistant foot pad and protects the rail.
WERNER 4' 225# TY-2 ALUMINUM STEPLADDERS WER 364
The 364 aluminum 4 ft step ladder has a duty rating of 250 pounds and Tool-Tra-Top® that feature a convenient tray for holding tools or a paint can and slots for a paint roller tray. There is also a sturdy molded paint can hanger on the back of the top. The automatic SPILL-PROOF® pail shelf opens and closes with the ladder. The TRACTION-TRED® steps are slip resistant.
WERNER 4' 200# TYPE-3 ALUM STEPLADDER WER 244
The 244 2 step type III aluminum step stool has a duty rating of 200 pounds and features slip resistant steps and comfortable, tubular rails. The feet are mar resistant. This ladder is light weight and easy to open and close. It folds to 3 inches for compact and convenient storage.
WERNER 4' 200# TY-3 PLATFORM ALUM/LADDERS WER 264
The 264 2 step type III aluminum platform ladder has a duty rating of 200 pounds and comfortable, tubular rails. The SPILL-PROOF® pail holder with rag rail is ideal for painting projects. The pail shelf also has convenient tool holders and folds automatically with the platform. Folds to 3-1/2 in for compact, convenient storage. The large, slip resistant platform provides a comfortable work area.
WERNER 36' 300# 1A F/GLS EXTENSION LADDER WER D-6236-2
The D6236-2 fiberglass extension ladders have non-conductive rails making these ladders Ideal for working near electricity. With a duty rating of 300 pounds, the D6236-2 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D-rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.
WERNER 32' 300# 1-A F/GLS EXT/LADDERS WER D-6232-2
The D6332-2 fiberglass extension ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300 pounds, the D6332-2 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D-rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories. Note: image displayed is D6328-2 28 ft type IA fiberglass D-rung extension Ladder.
WERNER 32' 300# 1-A ALUMINUM EXT/LADDERS WER D-1532-2
The D1532-2 aluminum extension ladders have a duty rating of 300 lbs and have extra heavy duty I-Beam side rails. The base and fly sections separate easily and can be used separately. Guide brackets help to ease operation when raising and lowering the fly section. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. TRACTION-TRED® D-rungs are slip resistant, and the rugged shoes rest flat or are held in spur position with the SHU-LOK® feature. Rugged spring loaded locks operate smoothly. Mar resistant end caps protect the surface ladder is resting against.
WERNER 32' 225# TY-2 ALUMINUM EXT/LADDERS WER D-1232-2
The D1232-2 aluminum 32 ft extension ladder has a duty rating of 225 pounds and interlocking side rails. The TRACTION-TRED® D-rungs are slip resistant. Spring loaded locks operate smoothly for easy operation. Shoes rest flat or are held in spur position with SHU-LOK® feature. Mar resistant end caps help protect the surface ladder is leaning against. Exclusive ALFLO® rung joint means TWIST-PROOF® performance every time.
WERNER 300# 17-FT TELESCOPING MULTILADDER WER MT-17
The MT-17 Telescoping 17 ft MultiLadder is versatile and easy-to transport. The adjustable telescoping design allows the ladder to be used in 4 different positions -- twin Step Ladder, stairway Step Ladder, extension ladder and as 2-scaffold bases. In the Step Ladder mode, this hybrid ladder can be used for one or two-person jobs with a duty rating of 300 pounds per side. The feet are slip resistant and the ends of the multi-position ladder are flared for firm support. Smooth curved rails allow for comfortable climbing. With its many uses, this MultiLadder fits all your climbing needs.
WERNER 3/4" D-RING CARABINERS WER A-100301
Carabiners area versatile connecting option for securely attaching lanyards or lifelines to anchorages. 3/4 inch gate opening.
WERNER 3' 375# 1-AA F/GLS STEPLADDERS WER 7403
Built to last, the Werner 375-pound duty rated 7403 Fiberglass 3 ft Step Ladder is rugged and ready for the job. This ladder features extra heavy duty aluminum HolsterTop, internal spreaders and external rail shields for long lasting durability. With The Edge® bracing system and GLAS*MARK® Violator stripes on the rails, the 7400 series is built to handle the work site and stands ready for tough jobs. Fiberglass rails are non-conductive for working near electricity.
WERNER 3' 375# 1-AA F/GLS STEPLADDERS WER 7303
The 7303 fiberglass 3 ft step ladder has a duty rating of 375 pounds and features heavy duty aluminum HolsterTop. With a full set of horizontals and heavy duty internal spreaders, these ladders are built for the long haul. The molded external rail shields and the EDGE® bracing system help decrease damage to the rails. The slip resistant TRACTION-TRED® steps are single riveted and have extra wide knee braces. The Glas*Mark® violator stripes increase the visibility of the ladder on the jobsite. Fiberglass rails are non-conductive for working near electricity.
WERNER 3' 300# TYPE-1-A F/GLS STEPLADDERS WER 6203
The 6203 Fiberglass 3 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
WERNER 3' 300# 1-A PODIUM LADDER W/CASTER WER PD-6203-4-C
The new PD6203-4C podium ladder with factory installed casters for added mobility offers the same reach height as a 5 ft step ladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra large platform with toe guard feels like you are standing on the ground and 4X work zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed foot gives the bottom of the ladder protection from every angle with an integrated rail shield and over sized foot pads. The durable caster assembly with stainless steel spring, steel stem and ball bearing swivel eliminates the need for a separate brake. The 4 soft rubber casters allow for easy 360 deg mobility and designed to roll over thresholds.
WERNER 3' 300# 1-A F/GLS PODIUM LADDERS WER PD-6203
The new PD6203 podium ladder offers the same reach height as a 5 ft step ladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra large platform with toe guard feels like you are standing on the ground and 4X work zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360™ gives the bottom of the ladder protection from every angle with integrated rail shield, edge bracing and over sized foot pads.
WERNER 3' 250# TY-1 ALUMINUM STEPLADDERS WER 373
The 373 aluminum 3 ft step ladder has a duty rating of 300 pounds yet is light weight and easy to transport. The Tool-Tra-Top® has a drill holster, convenient tray for tools/paint and small parts. There is also a sturdy molded paint can hanger on the backside of the top. The SPILL-PROOF® pail shelf has a rag rack and holds a gallon paint can and automatically closes with the ladder. There is a full set of horizontals on the rear section and the 4 ft, 5 ft and 6 ft models have a unique H spreader with hand grip for easy one handed carrying and closing. The TRACTION-TRED® steps are slip resistant and double riveted.
Recently Viewed
3/8" CHAIN DOUBLE CLEVIS LINKS, ZINC PLATED-DIX81380 >
#16-#14 NYLON WIRE TERMINALS (EA)-TYTNY1610S>
Klein® 87415 Fixed Length Aircraft Cable Lanyard, 6 ft L, Steel Line, Snap Anchorage Connection, Snap Hook Harness Connection Hook
Klein® 87415 Fixed Length Aircraft Cable Lanyard, 6 ft L, Steel Line, Snap Anchorage Connection, Snap Hook Harness Connection Hook
MORSE® 70115 4110 Premium Tool Bit, Carbide Tip, 370E Tip Material Grade, A Style, 3/8 in H x 3/8 in W Shank, 2-1/2 in OAL, Right Hand Cutting, Industry Standard Number: AR-6
MORSE® 70115 4110 Premium Tool Bit, Carbide Tip, 370E Tip Material Grade, A Style, 3/8 in H x 3/8 in W Shank, 2-1/2 in OAL, Right Hand Cutting, Industry Standard Number: AR-6
Armstrong® 10-107 Standard Length Socket, 1/4 in Square Drive, 7/32 in, 12 Points
COLD CHISEL-MAY66107>
