Walter Surface Technologies
Drillco 720A108 Heavy Duty Stub Length Screw Machine Length Drill, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, Solid Carbide, Uncoated
Slow helix 135° split point provides ease of penetration and increases edge strength. Heavy-duty web, short flute and overall length increase strength and rigidity.Solid Carbide ideally suited for drilling difficult materials (up to Rc 60).
Drillco 720A110 Heavy Duty Stub Length Screw Machine Length Drill, 5/32 in Drill - Fraction, 0.1562 in Drill - Decimal Inch, Solid Carbide, Uncoated
Slow helix 135° split point provides ease of penetration and increases edge strength. Heavy-duty web, short flute and overall length increase strength and rigidity.Solid Carbide ideally suited for drilling difficult materials (up to Rc 60).
Drillco 720A112 Heavy Duty Stub Length Screw Machine Length Drill, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, Solid Carbide, Uncoated
Slow helix 135° split point provides ease of penetration and increases edge strength. Heavy-duty web, short flute and overall length increase strength and rigidity.Solid Carbide ideally suited for drilling difficult materials (up to Rc 60).
Drillco 720A116 Heavy Duty Stub Length Screw Machine Length Drill, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, Solid Carbide, Uncoated
Slow helix 135° split point provides ease of penetration and increases edge strength. Heavy-duty web, short flute and overall length increase strength and rigidity.Solid Carbide ideally suited for drilling difficult materials (up to Rc 60).
Drillco 720A120 Heavy Duty Stub Length Screw Machine Length Drill, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, Solid Carbide, Uncoated
Slow helix 135° split point provides ease of penetration and increases edge strength. Heavy-duty web, short flute and overall length increase strength and rigidity.Solid Carbide ideally suited for drilling difficult materials (up to Rc 60).
Drillco 720A124 Heavy Duty Stub Length Screw Machine Length Drill, 3/8 in Drill - Fraction, 0.375 in Drill - Decimal Inch, Solid Carbide, Uncoated
Slow helix 135° split point provides ease of penetration and increases edge strength. Heavy-duty web, short flute and overall length increase strength and rigidity.Solid Carbide ideally suited for drilling difficult materials (up to Rc 60).
Drillco 72A104C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A108C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A112C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/16 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A116C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/4 in Dia Cutter, 3/4 in Length of Cut, 2 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A120C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 5/16 in Dia Cutter, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A128C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A132C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A140C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A148C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A164C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1 in Dia Cutter, 1-1/2 in Length of Cut, 2 Flutes, 1 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 735A108C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 1/8 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 735A112C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 3/16 in Dia Cutter, 1-1/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 735A116C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 1/4 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 735A120C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 5/16 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 735A124C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 3/8 in Dia Cutter, 1-3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 735A132C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 1/2 in Dia Cutter, 3 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 6 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 735A148C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 3/4 in Dia Cutter, 3 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 6 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 73A104C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Recently Viewed
Gardner Bender GS-366 Multi-Purpose Multi-Tool Crimper/Stripper, 20 to 8 AWG, 22 to 10 AWG Solid/Stranded Cable, 9-5/8 in OAL
This multi-purpose tool can be used to cut, strip, crimp, cut and rethread bolts. Features an ergonomic cushioned handle design, hardened steel cutting blades that provide strength and durability and a wire strip length gauge.
Calterm 50167 Wire, Copper Conductor, 16 AWG Conductor, 30 ft L, For Use With Repairs or New Wiring Applications, Domestic
Calterm 50167 Wire, Copper Conductor, 16 AWG Conductor, 30 ft L, For Use With Repairs or New Wiring Applications, Domestic
Gardner Bender GST-70M Multi Tool Strips Circuit Alert, 8 to 20 AWG Cable/Wire
Gardner Bender GST-70M Multi Tool Strips Circuit Alert, 8 to 20 AWG Cable/Wire
Gardner Bender GBT-3502 Battery Tester, 9V/AA/AAA/C/D/Button Battery, 6 Batteries
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal, the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
