Walter Surface Technologies
Pulley taps are used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with standard length taps. The thread length is the same length as a standard tap.
Pulley taps are used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with standard length taps. The thread length is the same length as a standard tap.
Drillco 25A208B 2500 Straight Flute Tap, Right Hand Cutting, 1-1/8-8 Thread, Bottoming Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Drillco 25A208P 2500 Straight Flute Tap, Right Hand Cutting, 1-1/8-8 Thread, Plug Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Drillco 25A208T 2500 Straight Flute Tap, Right Hand Cutting, 1-1/8-8 Thread, Tapered Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Drillco 25A216B 2500 Straight Flute Tap, Right Hand Cutting, 1-1/4-8 Thread, Bottoming Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Drillco 25A216P 2500 Straight Flute Tap, Right Hand Cutting, 1-1/4-8 Thread, Plug Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Drillco 25A216T 2500 Straight Flute Tap, Right Hand Cutting, 1-1/4-8 Thread, Tapered Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Drillco 25A224B 2500 Straight Flute Tap, Right Hand Cutting, 1-3/8-8 Thread, Bottoming Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Drillco 25A224P 2500 Straight Flute Tap, Right Hand Cutting, 1-3/8-8 Thread, Plug Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Drillco 25A224T 2500 Straight Flute Tap, Right Hand Cutting, 1-3/8-8 Thread, Tapered Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Drillco 25A232B 2500 Straight Flute Tap, Right Hand Cutting, 1-1/2-8 Thread, Bottoming Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Drillco 25A232P 2500 Straight Flute Tap, Right Hand Cutting, 1-1/2-8 Thread, Plug Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Drillco 25A232T 2500 Straight Flute Tap, Right Hand Cutting, 1-1/2-8 Thread, Tapered Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Drillco 270DX Imperial Jobber Length Drill Dispenser, 270 PC Capacity
Drillco 2700C12 Tap and Die Set, 12 Pieces, NPT Thread
Carbon Steel Taps are used to rethread damaged or jammed threads, or to thread mild steels. They can be used for either through or blind holes. Taper Pipe Tap (NPT).
Drillco 285A030A 2850 Spiral Point Tap, Right Hand Cutting, M3x0.5 Thread, D3 Thread Limit, Plug Chamfer, 2 Flutes, Uncoated, HSS
The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
Drillco 285A040A 2850 Spiral Point Tap, Right Hand Cutting, M4x0.7 Thread, D4 Thread Limit, Plug Chamfer, 2 Flutes, Uncoated, HSS
The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
Drillco 285A050A 2850 Spiral Point Tap, Right Hand Cutting, M5x0.8 Thread, D4 Thread Limit, Plug Chamfer, 2 Flutes, Uncoated, HSS
The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
Drillco 285A060A 2850 Spiral Point Tap, Right Hand Cutting, M6x1 Thread, D5 Thread Limit, Plug Chamfer, 2 Flutes, Uncoated, HSS
The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
Drillco 285A080A 2850 Spiral Point Tap, Right Hand Cutting, M8x1.25 Thread, D5 Thread Limit, Plug Chamfer, 2 Flutes, Uncoated, HSS
The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
Drillco 285A100A 2850 Spiral Point Tap, Right Hand Cutting, M10x1.5 Thread, D6 Thread Limit, Plug Chamfer, 3 Flutes, Uncoated, HSS
The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
Drillco 285A100B 2850 Spiral Point Tap, Right Hand Cutting, M10x1.25 Thread, D5 Thread Limit, Plug Chamfer, 3 Flutes, Uncoated, HSS
The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
Recently Viewed
Calterm 50145 Wire, Copper Conductor, 14 AWG Conductor, 2 in L, For Use With Repairs or New Wiring Applications, Domestic
Calterm 50145 Wire, Copper Conductor, 14 AWG Conductor, 2 in L, For Use With Repairs or New Wiring Applications, Domestic
Calterm 50105 Wire, Copper Conductor, 10 AWG Conductor, 2 in L, For Use With Repairs or New Wiring Applications, Domestic
Calterm 50105 Wire, Copper Conductor, 10 AWG Conductor, 2 in L, For Use With Repairs or New Wiring Applications, Domestic
Drillco 175F1127 1750 Screw Anchor Imperial Masonry Drill, 3/16 in Drill Bit, SDS-Plus Shank, 4-1/8 in D Cutting, Carbide Cutting Edge, 7 in OAL
Hex shaft for attachment to sleeve driver to drive tapcon® screws.
Bussmann BP/FP-2 FP Series Non-Indicating Fuse Puller, 19.19 in OAL, For Use With 13/32 to 1-3/16 in Dia Fuses
Bussmann series cartridge fuse pullers are heavy-duty tools for safely removing fuses from their blocks. Automotive fuse pullers and testers are designed for easy one-handed removal, install or testing of glass or blade fuses.
