Drillco 25A224T 2500 Straight Flute Tap, Right Hand Cutting, 1-3/8-8 Thread, Tapered Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
-
BrandDrillco
-
UPC045996895650
-
Manufacturer Part Number25A224T
-
CountryUSA|Canada
-
Finish/CoatingUncoated
-
MaterialHSS
-
Thread Size1-3/8-8
-
Thread StandardUNC
-
Chamfer TypeTapered
-
Measurement SystemImperial
-
Series2500
-
Number of Flutes4
-
Cutting DirectionRight Hand
- Geometries available in taper, plug, and bottoming
- Bright finish for added lubricity
- Standard 8-pitch on every size
- Square shank for use with standard sized tap wrenches
- Square shank for use with standard sized tap wrenches
-
UNSPSC27112806
-
Package Description1/PK
-
SDS
-
Catalog
Recently Viewed
Drillco 25A224T 2500 Straight Flute Tap, Right Hand Cutting, 1-3/8-8 Thread, Tapered Chamfer, 4 Flutes, Uncoated, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripâ„¢ handles for greater torque and comfort.
7-1/2" 50# BLACK CABLE TIE--PK/100-CTE750UV100>
Proto® J49907/32XL Extra Long Socket Driver Bit, 3/8 in Drive, 7/32 in, 5 in L Bit
Pulley taps are used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with standard length taps. The thread length is the same length as a standard tap.
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripâ„¢ handles for greater torque and comfort.
