Southwire Company
Southwire GARVIN® G1938 Cover, 4 in L x 4 in W, Duplex Receptacle Cover, Steel
4 in square, 1/2 in raised, duplex receptacle industrial surface covers are used to attach a duplex receptacle device directly onto 4 in square boxes in a industrial setting. Garvin Industries 4 in square industrial surface covers allow for a quick installation of duplex devices to steel covers before they are mounted to the box.
Southwire GARVIN® 54C6 Cover, 4 in L x 4 in W, Flat Cover, Cold Rolled Steel
4 in octagon box covers with (1) 1/2 in conduit knockouts are used to cover existing wires in octagon boxes while allowing the installation of a single 1/2 in conduit. Garvin Industries flat covers provide a quick and easy way to cover or terminate exposed electrical wire.
Southwire GARVIN® 52C1 Blank Cover, 4 in L x 4 in W, Flat Cover, Steel
4 in square blank flat covers are used to cover 4 in square box wiring and provide a means for access when future conduit runs are required.
Southwire CCI® Tri-Source® 02841 In-Line GFCI Cord Set With Tri-Source® Cord Connector, 120 V AC, (3) 12 AWG Bare Stranded Copper Conductor, 2-1/2 ft L
Provide personal protection from ground faults and open neutral conditions anywhere electrical equipment is used. All GFCIs are compact, weatherproof/rainproof and engineered to handle rugged conditions of any jobsite. All models feature molded connectors, 12 or 14 gauge OSHA safety yellow cords, heavy duty strain relief, reinforced blades and pins, manual "Test/Reset" buttons and industrial grade relays.
Southwire CCI® 02409 SJTW Extension Cord With Lighted End, 13 A/125 V AC, 14/3 AWG, 100 ft L Cord
PRIME®'s outdoor extension cords are water and weather resistant, flame retardant and made to work. They are ideal for use with power tools, lawn and garden equipment rated up to 15 A. The strain-reliefs are oversized to prevent the wire from separating from the plug and connector.
Southwire CCI® 02408 SJTW Extension Cord With Lighted End, 13 A/125 V AC, 14/3 AWG, 50 ft L Cord
PRIME®'s outdoor extension cords are water and weather resistant, flame retardant and made to work. They are ideal for use with power tools, lawn and garden equipment rated up to 15 A. The strain-reliefs are oversized to prevent the wire from separating from the plug and connector.
Southwire CCI® 02407 SJTW Extension Cord With Lighted End, 15 A/125 V AC, 14/3 AWG, 25 ft L Cord
Heavy duty, round, vinyl extension cord designed for industrial use. Orange vinyl jacket protects against oil, grease, ozone and gives added flexibility at below freezing temperatures. Vinyl plugs and connectors are molded on and won't break or pull off cord.
Southwire CCI® 02307 SJTW Extension Cord, 13 A 125 V AC, 25 ft L Cord, 3 Conductors
CCI® 02307 SJTW Extension Cord, 13 A 125 VAC, 25 ft L Cord, 3 Conductors
Southwire - Topaz WCH1DUP Weatherproof Cover, 4.56 in L x 2.81 in W, Duplex Receptacle Cover, Die Cast Aluminum
Topaz carries a complete line of Weatherproof Covers in a variety of designs to suit multiple applications. All models install cleanly and feature large cord openings for ease of use. Our Single Gang Duplex Horizontal Cover is fabricated from strong, durable and lightweight copper free aluminum and features an aluminum cast cover with spring loaded lid for easy accessibility.All models include gasket, mounting hardware and instructions; available in gray, white and bronze. UL listed, 2011 NEC and NEMA 3R compliant. Point of purchase packaging promotes self merchandising and easy display.
Southwire - Topaz RB2 Male Threaded Reducing Bushing, 3/4 x 1/2 in Trade, Steel, Zinc Plated
REDUCING BUSHINGSTopaz's line of Reducing Bushings reduce the size conduit hubs; smooth and rounded integral bushing offers conductor protection. Fabricated from strong and long lasting steel or high grade malleable iron. Steel sizes from 1/2” by 3/8” to 2” by 1 1/2”; malleable iron available in sizes from 2 1/2” by 1” to 4” by 3 1/2”.
Southwire - Topaz C8451 1-Hole 1-Slot Deep Octagon Box Cover, 4 in W, Blank/Flat Cover, Steel
Southwire - Topaz 4 in octagon blank flat covers are used to cover 4 in octagon box wiring and provide a means for access when future conduit runs are required. cULus listed and RoHS compliant.
Southwire - Topaz 86 Conduit Elbow, 2 in Trade, 90 deg, Steel, Galvanized
Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.
Southwire - Topaz 85 Conduit Elbow, 1-1/2 in Trade, 90 deg, Steel, Galvanized
Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.
Southwire - Topaz 836 Female Threaded Conduit Bushing, 2 in Trade, Thermoplastic
Topaz's Rigid insulating bushings offer maximum protection for cables to avoid damaging abrasion due to sharp Rigid edges. Ideal for use in communications, television and security system installations. Bushings provide smooth, rounded surfaces at the ends of raceways and easily affixes to conduit; strong, impact resistant plastic construction assures continued performance. Certified flame retardant to 105°C. Always available in trade sizes from 1/2” to 6”.
Southwire - Topaz 83 Conduit Elbow, 1 in Trade, 90 deg, Steel, Galvanized
Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.
Southwire - Topaz 82 Conduit Elbow, 3/4 in Trade, 90 deg, Steel, Galvanized
Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.
Southwire - Topaz 81 Conduit Elbow, 1/2 in Trade, 90 deg, Steel, Galvanized
Southwire - Topaz EMT 90 deg elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity.
Southwire - Topaz 68 Conduit Elbow, 3 in Trade, 90 deg, Steel, Galvanized
Topaz's Rigid 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are defect free to ensure a secure connection to Rigid conduit and to preserve longevity. Available in sizes from 1/2” to 6”; UL listed, HDG, meets Federal specification WW-C-563.
Southwire - Topaz 66 Conduit Elbow, 2 in Trade, 90 deg, Steel, Galvanized
Topaz's Rigid 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are defect free to ensure a secure connection to Rigid conduit and to preserve longevity. Available in sizes from 1/2” to 6”; UL listed, HDG, meets Federal specification WW-C-563.
Southwire - Topaz 63 Threaded Conduit Elbow, 1 in Trade, 90 deg, Steel, Galvanized
Topaz's Rigid 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are defect free to ensure a secure connection to Rigid conduit and to preserve longevity. Available in sizes from 1/2” to 6”; UL listed, HDG, meets Federal specification WW-C-563.
Southwire - Topaz 60 Tubular Threaded Conduit Coupling, 4 in, For Use With Rigid or IMC Conduit, Galvanized Steel, Zinc Plated
Topaz's Rigid Couplings feature a tubular threaded type assembly and ensure proper alignment and a secure connection when joining two ends of threaded Rigid conduit. Other applications include bonding threaded conduits to electrical junction boxes or enclosures when used in conjunction with chase nipples and connectors. Constructed of strong galvanized steel for low conductivity and high corrosion resistance. Available in 1/2” to 6” sizes with NPSM threads. UL listed; Meets Federal specification WW-C-563.
Southwire - Topaz 59 Tubular Conduit Coupling, 3-1/2 in, For Use With Rigid or IMC Conduit, Galvanized Steel, Zinc Plated
Topaz's Rigid Couplings feature a tubular threaded type assembly and ensure proper alignment and a secure connection when joining two ends of threaded Rigid conduit. Other applications include bonding threaded conduits to electrical junction boxes or enclosures when used in conjunction with chase nipples and connectors. Constructed of strong galvanized steel for low conductivity and high corrosion resistance. Available in 1/2” to 6” sizes with NPSM threads. UL listed; Meets Federal specification WW-C-563.
Southwire - Topaz 58 Tubular Coupling, 3 in, For Use With Rigid/IMC Conduit, Steel, Galvanized
Topaz's Rigid Couplings feature a tubular threaded type assembly and ensure proper alignment and a secure connection when joining two ends of threaded Rigid conduit. Other applications include bonding threaded conduits to electrical junction boxes or enclosures when used in conjunction with chase nipples and connectors. Constructed of strong galvanized steel for low conductivity and high corrosion resistance. Available in 1/2” to 6” sizes with NPSM threads. UL listed; Meets Federal specification WW-C-563.
Recently Viewed
10-AMP FUSES-LITAGA10>
Irwin® Speedbor® 88706 2000 Extra Long Length Spade Bit, 3/8 in Dia, 16 in OAL, 15 in L Flute Flat Flute, 1/4 in Shank
No matter what wood-boring project you face, IRWIN makes a drill bit to do the job better. Whether the job requires quick, clean holes or precise finish work, there's an IRWIN bit for it. Our mark of quality is stamped on the shank of our full range of bits for every application and every need.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
1/2" X 1/2" - DRIVE 12" PT. DEEP SOCKET-ARS12316 >
51 TOOTH MINIMUM PLAIN BORE SPROCKETS FOR #50 CHAIN-IDC50B51 >
2-5/8" SOLID SHAFT COLLAR-AMCASC262 >
