Southwire Company
Southwire Southwire® Romex® SIMpull® NM-12/2-CU Non-Metallic Sheathed Cable, 600 V AC, (2) 12 AWG Solid Conductor, 250 ft L, Yellow
Southwire® Romex® Brand SIMpull® Type NM-B cable is manufactured as 2, 3, or 4 conductor cable, with a bare ground wire. Copper conductors are annealed (soft) copper. Stranded conductors are compressed stranded. Conductor insulation is 90 degC-rated polyvinyl chloride (PVC), nylon jacketed. Southwire® Romex® Brand SIMpull® Type NM-B is designed for Easier Pulling, Resulting in Easier installation. The cable jacket is color-coded for quick size identification; White - 14 AWG, Yellow - 12 AWG, Orange - 10 AWG,and Black - 8 AWG and 6 AWG.
Southwire Southwire® Areamaster™ L104 Designers Edge Deluxe Floodlight With Dusk to Dawn Photocell, (2) Fluorescent Lamp, 120 V AC
Southwire® Areamaster™ L104 Designers Edge Deluxe Floodlight With Dusk to Dawn Photocell, (2) Fluorescent Lamp, 120 VAC
Southwire Seoprene® 233450402 Type SJEOOW Portable Cord, Reel Packaging, 300 V AC, (3) 18 AWG Class K Bare Stranded Copper Conductor, 250 ft L
Portable cord is used for portable power distribution - any application requiring temporary or portable power. Cord is generally called service cord when it is intended to provide electrical service to an appliance or motor. The term "portable" indicates that it is intended for non-permanent use. Flexible may also be added and defines flexible cords and flexible cables used in applications specified by article 400 of the national electric Code. Depending on type, size, application, portable cord may have the following 3rd party designations: UL, CSA, MSHA, OSHA.
Southwire Romex® SIMpull® 28828272 Type NMB Cable, Spool Packaging, 600 V, (2) 12 AWG Copper Conductor, 400 ft L, Yellow
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire Madison Electric L-702 Hex Head Non-Insulated Standard Speed Conduit Nipple, 3/4 in, For Use With IMC/Rigid Conduit, Die Cast Zinc
At Madison Electric Products, quality is built into everything we do. Our line of nipples, elbows and couplings is no exception. With our wide variety, whatever your needs, we've got you covered.
Southwire Madison Electric L-701 Hex Head Non-Insulated Standard Speed Conduit Nipple, 1/2 in, For Use With IMC/Rigid Conduit, Die Cast Zinc
At Madison Electric Products, quality is built into everything we do. Our line of nipples, elbows and couplings is no exception. With our wide variety, whatever your needs, we've got you covered.
Southwire Madison Electric GSS Ground Pigtail With Green Slotted Hex Head Captive Screw, 12 AWG Solid Wire, 6-1/2 in L, Screw Terminal, Copper
GSS Ground Pigtail With Green Slotted Hex Head Captive Screw, 12 AWG Solid Wire, 6-1/2 in L, Screw Terminal, Copper
Southwire Madison Electric B-102 Hold-It Strap Box Support, Switch Box, Surface Mount, Steel
Madison Electric B-102 Hold-It Strap Box Support, Switch Box, Surface Mount, Steel
Southwire Madison Electric 706 1-Hole Conduit Strap, 2 in Conduit, Steel
1-Hole Conduit Strap, 2 in Conduit, Steel
Southwire Madison Electric 704 1-Hole Conduit Strap, 1-1/4 in Conduit, Steel
Madison Electric 704 1-Hole Conduit Strap, 1-1/4 in Conduit, Steel
Southwire Madison Electric 610130 Type JIC General Purpose Liquid Tight Flexible Metallic Conduit, 3/8 in Trade, 0.504 in ID x 0.614 to 0.71 in OD, 100 ft Coil L, Low Carbon Steel
With a wide range of sizes and styles, Madison has the flex and liquidtight conduit that you need. From trade sizes ranging from 3/8 to 4 in, no job is too big or too small. Made from the highest quality steel, aluminum and PVC, Madison's flex and liquidtight conduit come through each and every time.
Southwire Madison Electric 29 C-Type Beam Clamp, 200 lb Load, Malleable Iron/Steel, Zinc Plated
C-Type Beam Clamp, 200 lb Load, Malleable Iron/Steel, Zinc Plated
Southwire Madison Electric 27 Tapped Beam Clamp, 2 in Conduit, 100 lb Load, Malleable Iron, Zinc Plated
Tapped Beam Clamp, 2 in Conduit, 100 lb Load, Malleable Iron, Zinc Plated
Southwire GARVIN® STR50-SS 2-Piece Strut Clamp, 1/2 in Conduit, 316 Stainless Steel
Two-piece strut clamps are used to mount 1/2 in rigid conduits from strut channel. Garvin Industries two-piece construction provides a tight fit in strut. Additionally, their screw tight clamping action secures conduit in overhead strut channel or wall mount applications. stainless steel construction prevents corrosion and rust when used in damp locations.
Southwire GARVIN® STR150-SS 2-Piece Strut Clamp, 1-1/2 in Conduit, 316 Stainless Steel
Two-piece strut clamps are used to mount 1-1/2 in rigid conduits from strut channel. Garvin Industries two-piece construction provides a tight fit in strut. Additionally, their screw tight clamping action secures conduit in overhead strut channel or wall mount applications. stainless steel construction prevents corrosion and rust when used in damp locations.
Southwire GARVIN® SFP14 4-Hole Square Post Base, 1 Channel, 3-1/2 in H Base, For Use With 1-5/8 in Strut, Steel
Garvin Industries four hole single channel Post Bases are manufactured using zinc plated steel, have a 6 in by 6 in base, are 1/4 in THK and have (4) mounting holes.
Southwire GARVIN® SFF60 Flat Tee Plate, 4 Holes, 5-3/8 in L x 3-1/2 in W x 1/4 in THK, Steel
Garvin Industries flat four hole tee plates are manufactured with four 9/16 in holes and have a 1/4 in THK zinc plated steel finish.
Southwire GARVIN® SFF51 Flat Corner Plate, 4 Holes, 5-3/8 in L x 3-1/2 in W x 1/4 in THK, Steel
Garvin Industries flat four hole corner plates are manufactured with four 9/16 in holes and have a 1/4 in THK zinc plated steel finish.
Southwire GARVIN® LT75 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated
3/4 in T-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
Southwire GARVIN® LT100 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 1 in Hub, Die Cast Aluminum, Powder Coated
1 in T-style conduit bodies are attached to 1 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
Southwire GARVIN® LL75 LL-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated
3/4 in LL-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LL-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
Southwire GARVIN® LC50 C-Style Conduit Body With Unit Cover and Neoprene Gasket, 1/2 in Hub, Die Cast Aluminum, Powder Coated
1/2 in C-style conduit bodies are attached to 1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries C-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
Southwire GARVIN® LB200 LB-Style Conduit Body With Unit Cover and Neoprene Gasket, 2 in Hub, Die Cast Aluminum, Powder Coated
2 in LB-style conduit bodies are attached to 2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LB-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation.
Southwire GARVIN® LB150 LB-Style Conduit Body With Unit Cover and Neoprene Gasket, 1-1/2 in Hub, Die Cast Aluminum, Powder Coated
1-1/2 in LB-style conduit bodies are attached to 1-1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LB-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation.
Recently Viewed
13-MM 12-PT FULL POLISH METRIC LONG COMBINATION WRENCH
6-GRV BANDED 5-V X-900 V-BELT-PIX5VX900/06 >
CONDUIT FITTINGS, LIQUIDTIGHT CONNECTORS, MADE OF NYLON/GRAY, UL STANDARD, THREAD LENGTH .63 INCHES, DIAMETER 1366"
-APLNMM21 >
MA-5207 LINKBELT a high-precision, plain separable inner ring for cylindrical roller bearings.
• Bore Diameter (Inner Diameter): 35 mm / 1.3780 inches
• Inner Ring Raceway Outside Diameter: 43.97 mm / 1.7311 inches
• Overall Width: 26.998 mm / 1.0625 inches
• Bore Profile: Straight / Round
• Inner Ring Type: Type A (Plain Cylindrical, No Flanges)
• Material: 52100 High-Carbon Bearing Steel (Hardened Alloy Steel)
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
3/4"-ID FL/OD INSERT BEARINGS-FAFRAL012NPP>
