Regal Rexnord
Browning 2-7/16"-ID B-STYLE BUSHINGS BRW B-2-7/16
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Browning 2-7/16"-ID 4-BOLT TRB PILLOW BLOCK BRW PBE-920F X 2-7/16
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
Browning 2-7/16"-ID 4-BOLT TRB FLANGE UNITS BRW FBE-920 X 2-7/16
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
Browning 2-7/16"-ID 4-BOLT BB FLANGE UNITS BRW VF-4-S-239
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning 2-7/16"-ID 4-BOLT BB FLANGE UNITS BRW VF-4-E-239
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning 2-7/16"-ID 3030-STYLE TL BUSHINGS BRW 3030 X 2-7/16
Browning® 3750619 Taper Lock Bushing, 2-7/16 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
Browning 2-7/16"-ID 3020-STYLE TL BUSHINGS BRW 3020 X 2-7/16
Browning® 3750296 Taper Lock Bushing, 2-7/16 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Steel
Browning 2-7/16"-ID 2525-STYLE TL BUSHINGS BRW 2525 X 2-7/16
Browning® 3750031 Taper Lock Bushing, 2-7/16 in Dia Bore, 3-3/8 in Dia Barrel, 2-1/2 in OAL, Steel
Browning 2-7/16"-ID 2517-STYLE TL BUSHINGS BRW 2517 X 2-7/16
Browning® 3749777 Taper Lock Bushing, 2-7/16 in Dia Bore, 3-3/8 in Dia Barrel, 1-3/4 in OAL, Steel
Browning 2-7/16"-ID 2-BOLT TRB PILLOW BLOCK BRW PBE-920 X 2-7/16
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
Browning 2-7/16"-ID 2-BOLT BB FLANGE UNITS BRW VF-2-S-239
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning 2-7/16"-ID 2-BOLT BB FLANGE UNITS BRW VF-2-E-239
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning 2-7/16" SCREW CONVEYOR SHAFTS BRW 115-DSP-207
Browning® PC9312 2-Hole Screw Conveyor Drive Shaft, 2-7/16 in Dia, 6.69 in OAL, For Use With TorqTaper® Plus 5:1, 9:1, 15:1, 25:1 and 35:1 Ratio, SMTP Size 115 Shaft Mount Speed Reducer, Steel
Browning 2-7/16" 2-B LOW BB PILLOW BLOCKS BRW VPLS-239
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning 2-7/16" 2-B LOW BB PILLOW BLOCKS BRW VPLE-239
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning 2-7/16" 2-B HIGH BB PILLOW BLOCKS BRW VPE-239
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning 2-5/8"-ID S-1-STYLE BUSHINGS BRW S-1-2-5/8
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Browning 2-5/8"-ID R-2-STYLE BUSHINGS BRW R-2-2-5/8
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Browning 2-5/8"-ID R-1-STYLE BUSHINGS BRW R-1-2-5/8
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Browning 2-5/8"-ID QD SK-STYLE BUSHINGS BRW SK-2-5/8
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning 2-5/8"-ID QD SF-STYLE BUSHINGS BRW SF-2-5/8
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning 2-5/8"-ID QD F-STYLE BUSHINGS BRW F-2-5/8
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning 2-5/8"-ID QD E-STYLE BUSHINGS BRW E-2-5/8
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning 2-5/8"-ID Q-2-STYLE BUSHINGS BRW Q-2-2-5/8
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Recently Viewed
TYPE-K THERMOCOUPLE THERMOMETER-AMPEA11A>
1/4" X 1" USS B/H S/H CAPSCREWS-HOL64050>
POWERATED FHP V-BELT (3-L-630) -GAT6763 >
PIX 500-J-6 POLY RIB J V-BELT, 50" OC, 6 RIBS, 0.092 INCH PITCH 9/16" WIDTH
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 6 RIBS-HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX500J6 >
OIL SEALS-1.563" X 2.250" X .1.520"-IMS15535>
Proto® J4037 Gear Puller, 7 ton, 2 Jaws, 9 in Max Reach, 10 in Max Spread
