Milwaukee Tool
If more power is what you need, then look no further than the Milwaukee D-handle line of drills. With 7 amp motors and heat treated metal gears, these are truly the choice of the professional. The 1101-1 features 500 RPM and can be used with our right angle drive attachment to increase versatility.
The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job, especially with small-bit applications. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.
The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. The QUIK-LOK™ cord detaches easily for storage or service replacement. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.
1/2" CHUCK & KEY FOR 5378-20 & 21-MWK48665185 >
1/2" DRILL METAL CHUCKS-MWK48661575 >
1/2" X .014" X 1/4"-SHANK CRIMPED WIRE END BRUSH - MWK48521000 >
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee.
Setting the standard for large hole drilling in tight spaces. The 1/2 in Hole-HAWG® drill delivers power and torque in a compact design that makes it perfect for drilling between studs and joists. The powerful motor features 2-speed ranges plus reverse for increased versatility. The drill offers a 4-5/8 in self-feed bit capacity and an extra long pipe handle to help you control power.
This powerful 8.0 amp 1/2 in. drill has the construction and performance to eliminate any other 1/2 in. drill in its category.
Built to handle industrial and construction applications with ease. The 1/2 in. magnum® drill with all-metal keyless chuck has the raw power of a Milwaukee-built motor to perform in forward and reverse on wood, metal, plastics and composites. The keyless chuck makes accessory changes fast and convenient, while the exclusive brush system speeds brush changes to under one minute. Detach the Quik-Lok® cord easily for storage or service replacement.
Built to handle industrial and construction applications with ease. The 1/2 in Magnum® drill has the raw power of a Milwaukee® built motor to perform in forward and reverse on wood, metal, plastics and composites. The exclusive brush system speeds brush changes to under one minute. Detach the QUIK-LOK™ cord easily for storage or service replacement.
Outperforms all other 1/2 in drills in its category. The 1/2 in Magnum® drill with all metal chuck and QUIK-LOK™ cord has the power and construction to deliver long lasting performance. The all metal gear case and diaphragm provide high durability on the jobsite the ergonomic, tactile grip and two finger trigger optimize user comfort and balance. Add the convenience and extra grip strength of the Grip-Lok™ chuck and a heavy duty detachable cord and you have unchallenged value.
Built to handle industrial and construction applications with ease. The 1/2 in. magnum® drill has the raw power of a Milwaukee-built motor to perform in forward and reverse on wood, metal, plastics and composites. The keyless chuck makes accessory changes fast and convenient, while the exclusive brush system speeds brush changes to under one minute. Detach the Quik-Lok® cord easily for storage or service replacement.
This powerful 9 A, 1/2 in hammer drill features dual speed ranges (0 to 1500 and 0 to 3500 rpm for better operator control), regardless of your materials or accessories. There's a percussion drilling mode for masonry and a rotary drilling mode that accommodates a variety of bits for holes in wood, metal and plastic. Its high speed and compact size make it ideal for setting fasteners in concrete and drilling small holes for anchors. Yet its heavy duty metal gear case, self-stopping brushes and ball and roller bearing construction make it tough enough to handle the most grueling jobsite applications. The anti-vibration system (AVS) and ergonomic handle reduce user fatigue and increase comfort and control. The dual-speed hammer drill comes equipped with a removable side-handle, depth gauge and impact-resistant carrying case.
1/2" KEYLESS CHUCK-MWK42660755 >
This 1/2 in. grip lock keyless chuck withstands the vibration of the hammering action while keeping a firm hold on the bit. This chuck is offered as standard equipment on the Milwaukee hammer drill (model 0513-21). It can be used on any drill or hammer drill with a 1/2 in. capacity.
1/2" OPEN END TOOL WRENCH-MWK49964040 >
1/2" ROUTER COLLETS-MWK48661010 >
Milwaukee®'s Spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee's Spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
This adapter allows the use of SDS plus shank accessories in a 1/2 in. chuck rotary hammer.
The most powerful single-speed hammer drill on the market, with up to 2X more durability. This practical 8 amp, 1/2 in. dual-mode hammer drill offers power and versatility for a variety of tough jobs, with an impressive 0-2,800 RPMs and 0-48.000 Bpms. Superior engineering, an all-metal gear case and a heavy-duty metal chuck make this twice as durable as the leading competitor while maintaining outstanding performance. The compact 11.5 in. profile lets you work in tight spaces, and the two modes accommodate drilling in wood, steel and plastic or hammer drilling in concrete. A removable 360° side handle helps you set the depth rod for pre-set hole drilling. Over-molding ensures a surer, more comfortable grip and minimizes vibration and fatigue on the jobsite.
The M18™ cordless 1/2 in. Compact Impact Wrench is the most powerful 1/2 in. Compact Impact Wrench in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,450 RPM, 3,350 ipm and 183 ft-lbs of fastening torque for class-leading performance. REDLINK™ Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18™ cordless 1/2 in. Compact Impact Wrench features a 1/2 in. pin-detent anvil for maximum socket retention, an LED light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
Get the most powerful, most compact, longest-running impact wrench in its class. The M18™ cordless Lithium-Ion 1/2 in high torque impact wrench features a Milwaukee® 4-pole motor and powerful impact mechanism to deliver a reliable 450 ft-lb of torque with maximum runtime. The REDLITHIUM™ extended capacity battery pack delivers more work per charge and more work over pack life than the competitors, as well as best-in-class performance in extreme jobsite conditions. You'll get consistent speed control between 0 to 1900 rpm and 0 to 2200 IPM with the variable-speed trigger. A 1/2 in anvil with friction ring allows quick and easy one-handed socket changes. The M18™ impact wrench's onboard, real-time battery fuel gauge helps you monitor the charge precisely, so there's less downtime on the job. Lightweight and portable, with superior ergonomics, this 18 V cordless power tool offers ultimate comfort during prolonged use. The kit includes two M18™ XC batteries, an M18™ and M12™ multi Vage Lithium-Ion battery charger and a carrying case.
Recently Viewed
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8 positions to make cutting easier. A 1.65 in. starter hole is all that is needed to start or start from the edge of the material. A nibbler is also what you need if you are cutting corrugated metal. The 6880 is our heaviest nibbler with 10 gauge capacity in steel and 12 gauge into stainless. When perfect cuts are what you need, look to the Milwaukee line of nibblers.
The PowerLine Hammer Holder from Klein Tools is made of Cordura nylon, which is exceptionally resistant to abrasion, punctures, and tearing. The heavy-metal hammer loop is riveted for added durability. The holder itself is also riveted and double-stitched providing even more strength.
The M12â„¢ FUELâ„¢ 1/4 in hex impact driver once again raises the bar for 12V performance with best in class driving speed, power and size. By focusing on productivity, this impact driver gets the job done faster by being over 20% faster in application speed vs the competition. This tool outputs over 1300 in-lb of torque that allows the user to get more work done by completing a wide range of fastening. Measuring only 5.1 in length allows for unmatched access in tight spaces. The POWERSTATEâ„¢ brushless motor delivers upto 0 to 3300 rpm with constant power output to drive screws faster. REDLINKâ„¢ Plusâ„¢ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with M12â„¢ REDLITHIUMâ„¢ compact batteries or extended capacity batteries which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-mode drive control provides greater control over output speed and power for greater versatility by delivering 0 to 1300 rpm in mode 1, 0 to 2400 rpm in mode 2 and 0 to 3300 rpm in mode 3. Mode 4 is self-tapping screw mode which is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
Milwaukee® SHOCKWAVE™ 48-13-6804 Lineman's Impact Auger Bit, 5/8 in Dia, 24 in OAL, Wide Flute, 7/16 in Shank
The SHOCKWAVEâ„¢ lineman's impact auger bits are engineered to deliver cleaner, faster holes in wooden utility poles. They feature a single spur design, which scores the edge of the hole, creating a cleaner finish that allows bolts to slide through without resistance. The bits are coated with a reinforced anti-friction PTFE coating for overall smoother drilling and easier removal of the bit from the pole. The aggressive feed screw and cutting edge pull the bit through the material while the optimized wide flute geometry quickly ejects the chips to clear the hole and reduce clogs, leading to overall faster drilling speeds.
TIGHT GRIP SCREW-ON FILE HANDLE FOR 12
" FILES-BRU30575 >
The MILWAUKEE® 3/8" x 54" Flexible Cable Auger Bit provides flexible drilling and clean holes when installing small wire systems in unreachable spaces. The screw tip design allows for faster wood boring. The dual pull-through hole design features holes on both ends for feeding wire through drilled holes. The auger style flute allows for faster drilling and easy chip ejection. The flexible shaft allows you to drill inside walls or between floors with greater precision and ease when installing all types of small wire systems, including computer, security, phone, and cable. The 3-FLAT SECURE-GRIP™ prevents the auger bit from slipping in the chuck. The reusable case protects the bit. The cable auger bit is for use with drills. Cable bit accessories sold separately.
