Milwaukee Tool

For materials up to 3/16 in., these Carbide tipped sheet metal hole saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the Carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/4 in. diameter.

Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1-9/16 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.

Designed from the ground up with the professional tradesman in mind, the 102 x 77 spot infrared Imager gives users unmatched visibility to maintenance issues, so they can quickly diagnosis the problem. With instant start-up for scanning large areas and the ability to give high resolution images with precise single spot measurements, the new Imager is ideal for fast and accurate troubleshooting. Exclusive dual sense technology allows the Imager to individually optimize pixels to eliminate the blurring of hot and cold details in complex environments. Equipped with 56:1 distance to spot performance, a 15 sec image hold and a temperature range of 14 to 626 deg F, users are able to scan, target and see a single on-screen temperature reading from long distance or from up close. Backed by a 5 years warranty, the 102 x 77 spot infrared Imager confirms Milwaukee® continued commitment to delivering solutions that save time and increase productivity for its users.

1" CRIMP END BRUSH PACKAGED-MWK48521020 >

1" DIAMOND CONCRETE CORE BITS-MWK48161006 >

1" DIAMOND CONCRETE CORE BITS-MWK48161007 >

The Milwaukee® tubing cutter cuts upto 1 in rubber and plastic tubing and PEX-a tubing. It features a replaceable V-shaped, double ground steel blade for clean perpendicular cuts and maximum tool life. The 1-handed locking mechanism is designed for an easy to use lock for improved tool safety. Backed by Milwaukee® Limited Lifetime Warranty the tubing cutter was built with an all metal core that provides longer tool life to the professional user.

Milwaukee Tool has a full line of demolition steel accessories with a variety of shanks (SDS Plus, SDS Max, spline or round Hex, 3/4 Hex, and 1-1/8 collared Hex with notch). The Milwaukee 48-62-2020 is a 1 in. x 12 in. Spline round Hex demo flat chisel. This demolition steel hammer accessory is ideally used with Milwaukee 2 in. Spline drive rotary hammer 5340 - 21. made from forged high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete.

Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.

Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.

Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.

Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.

Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.

The MILWAUKEE® 25ft Compact Magnetic Tape Measures have up to 15' of reach* and a magnet that easily attaches to EMT & steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6” of the blade, reducing tape tear. The compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.

The MILWAUKEE® 35ft Compact Magnetic Tape Measures have up to 15' of reach* and a magnet that easily attaches to EMT & steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6 in of the blade, reducing tape tear. The compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.

Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.

Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.

Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.

Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Excellent for general chipping and breaking applications. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.

Milwaukee® tape measures are nothing but heavy duty. Using nylon blade protection and a 5-point reinforced frame, they offer up to 10X longer life. Additional innovative features include a wider base which allows for greater stability during layout and an optimized hook that is designed for scoring applications like drywall.

The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. The QUIK-LOK™ cord detaches easily for storage or service replacement. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.

The adaptable 1/2 in dual-speed hammer drill features an 8.5 A motor that provides overload protection, even when drilling 3/4 in holes in concrete. Choose controls in two ranges: 0 to 1000 rpm/0 to 16000 bpm or 0 to 2500 rpm/0 to 40000 rpm. It's versatile enough to drill in wood with flat boring bits, hole saws, auger bits and selfeed bits - or drill in steel with twist bits and in concrete with percussion bits. The removable side-handle helps you set the depth rod for preset hold drilling. The heavy duty metal gear case withstands daily jobsite use, yet the drill's lightweight balanced pistol-grip design reduces fatigue during a long work day. The 10-foot, QUIK-LOK™ cord and keyed chuck ensure hours of reliable, uninterrupted performance.

The power to drill 1/2 in. holes in concrete. The versatility to excel at wood and steel applications. This powerful 7.5 amp, 1/2 in. hammer drill features dual trigger speed control in two ranges, with more power for the toughest applications or more speed and less torque for lighter applications. Use it for drilling in wood with flat boring bits, hole saws, auger bits and Selfeed bits, or in steel with twist bits and in concrete with percussion bits. The removable side handle helps set the depth rod for pre-set hole drilling. The heavy-duty metal gear case withstands daily jobsite use, yet the drill's lightweight, balanced pistol-grip design reduces fatigue during a long work day. The kit includes a durable carrying case.

The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.