Milwaukee Tool
Milwaukee 1-7/32" SHEET METAL HOLE CUTTERS MWK 49-57-8317
For materials up to 3/16 in., these Carbide tipped sheet metal hole saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the Carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/4 in. diameter.
Milwaukee 1-9/16" STEEL HAWG CUTTERS MWK 49-57-1564
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1-9/16 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Milwaukee 1.8" SPOT INFRARED CAMERAS MWK 2257-20
Designed from the ground up with the professional tradesman in mind, the 102 x 77 spot infrared Imager gives users unmatched visibility to maintenance issues, so they can quickly diagnosis the problem. With instant start-up for scanning large areas and the ability to give high resolution images with precise single spot measurements, the new Imager is ideal for fast and accurate troubleshooting. Exclusive dual sense technology allows the Imager to individually optimize pixels to eliminate the blurring of hot and cold details in complex environments. Equipped with 56:1 distance to spot performance, a 15 sec image hold and a temperature range of 14 to 626 deg F, users are able to scan, target and see a single on-screen temperature reading from long distance or from up close. Backed by a 5 years warranty, the 102 x 77 spot infrared Imager confirms Milwaukee® continued commitment to delivering solutions that save time and increase productivity for its users.
Milwaukee 1" CRIMP END BRUSH PKGD MWK 48-52-1020
1" CRIMP END BRUSH PACKAGED-MWK48521020 >
Milwaukee 1" DIA CONCRETE CORE BITS MWK 48-16-1006
1" DIAMOND CONCRETE CORE BITS-MWK48161006 >
Milwaukee 1" DIA CONCRETE CORE BITS MWK 48-16-1007
1" DIAMOND CONCRETE CORE BITS-MWK48161007 >
Milwaukee 1" LOCKING TUBING CUTTERS MWK 48-22-4202
The Milwaukee® tubing cutter cuts upto 1 in rubber and plastic tubing and PEX-a tubing. It features a replaceable V-shaped, double ground steel blade for clean perpendicular cuts and maximum tool life. The 1-handed locking mechanism is designed for an easy to use lock for improved tool safety. Backed by Milwaukee® Limited Lifetime Warranty the tubing cutter was built with an all metal core that provides longer tool life to the professional user.
Milwaukee 1" X 12"-LENGTH COLD CHISELS MWK 48-62-2020
Milwaukee Tool has a full line of demolition steel accessories with a variety of shanks (SDS Plus, SDS Max, spline or round Hex, 3/4 Hex, and 1-1/8 collared Hex with notch). The Milwaukee 48-62-2020 is a 1 in. x 12 in. Spline round Hex demo flat chisel. This demolition steel hammer accessory is ideally used with Milwaukee 2 in. Spline drive rotary hammer 5340 - 21. made from forged high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete.
Milwaukee 1" X 16" 4-CUT SPLINE R/HAMMER BIT MWK 48-20-4370
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee 1" X 16" SPLINE ROTOHAMMER BITS MWK 48-20-4100
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee 1" X 18"-LENGTH FLAT CHISELS MWK 48-62-2030
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee 1" X 22" 4-CUT SPLINE R/HAMMER BIT MWK 48-20-4375
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee 1" X 22" SPLINE ROTOHAMMER BITS MWK 48-20-4101
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee 1" X 25' MAGNETIC-TIP TAPE MEASURE MWK 48-22-0325
The MILWAUKEE® 25ft Compact Magnetic Tape Measures have up to 15' of reach* and a magnet that easily attaches to EMT & steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6” of the blade, reducing tape tear. The compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
Milwaukee 1" X 35' MAGNETIC-TIP TAPE MEASURE MWK 48-22-0335
The MILWAUKEE® 35ft Compact Magnetic Tape Measures have up to 15' of reach* and a magnet that easily attaches to EMT & steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6 in of the blade, reducing tape tear. The compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
Milwaukee 1" X 36" 4-C SPLINE ROTOHAMMER BIT MWK 48-20-4380
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee 1"-WIDE 3/4"-HEX X 12" FLAT CHISEL MWK 48-62-3010
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee 1"-WIDE 3/4"-HEX X 20" FLAT CHISEL MWK 48-62-3015
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee 1"-WIDTH X 12" SDS-MAX COLD CHISEL MWK 48-62-4079
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Excellent for general chipping and breaking applications. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee 1"X25-FT INCH TAPE MEASURES MWK 48-22-5525
Milwaukee® tape measures are nothing but heavy duty. Using nylon blade protection and a 5-point reinforced frame, they offer up to 10X longer life. Additional innovative features include a wider base which allows for greater stability during layout and an optimized hook that is designed for scoring applications like drywall.
Milwaukee 1/2" 120-V D-HANDLED DRILLS MWK 1107-6
The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. The QUIK-LOK™ cord detaches easily for storage or service replacement. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.
Milwaukee 1/2" 120-V HAMMERDRILL KITS MWK 5387-22
The adaptable 1/2 in dual-speed hammer drill features an 8.5 A motor that provides overload protection, even when drilling 3/4 in holes in concrete. Choose controls in two ranges: 0 to 1000 rpm/0 to 16000 bpm or 0 to 2500 rpm/0 to 40000 rpm. It's versatile enough to drill in wood with flat boring bits, hole saws, auger bits and selfeed bits - or drill in steel with twist bits and in concrete with percussion bits. The removable side-handle helps you set the depth rod for preset hold drilling. The heavy duty metal gear case withstands daily jobsite use, yet the drill's lightweight balanced pistol-grip design reduces fatigue during a long work day. The 10-foot, QUIK-LOK™ cord and keyed chuck ensure hours of reliable, uninterrupted performance.
Milwaukee 1/2" 120-V HAMMERDRILLS MWK 5378-21
The power to drill 1/2 in. holes in concrete. The versatility to excel at wood and steel applications. This powerful 7.5 amp, 1/2 in. hammer drill features dual trigger speed control in two ranges, with more power for the toughest applications or more speed and less torque for lighter applications. Use it for drilling in wood with flat boring bits, hole saws, auger bits and Selfeed bits, or in steel with twist bits and in concrete with percussion bits. The removable side handle helps set the depth rod for pre-set hole drilling. The heavy-duty metal gear case withstands daily jobsite use, yet the drill's lightweight, balanced pistol-grip design reduces fatigue during a long work day. The kit includes a durable carrying case.
Milwaukee 1/2" 120-V REVERSING DRILLS MWK 1001-1
The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.
Recently Viewed
15-IN-1 REPLACEMENT BITS (1/4" SL X 2" PHILLIPS)-LUT21103>
Klein® 3245 Round Connecting Bar, Chisel/Tapered Tip, 30 in OAL, Forged Steel
Klein Tools Round Connecting Bars are designed so they provide extra-leverage when positioning steel members and aligning bolt holes. Round bars are made of hardened steel for durability and long life. The chisel-end is at a 15-Degree angle to give greater leverage.
BBI 586415 Fully Threaded Machine Screw, #10-24, 1/2 in OAL, Flat Head, Zinc CR+3 Plated, Phillips® Drive
BBI 586415 Fully Threaded Machine Screw, #10-24, 1/2 in OAL, Flat Head, Zinc CR+3 Plated, Phillips® Drive
BBI 586776 Fully Threaded Machine Screw, 5/16-18, 4-1/2 in OAL, Flat Head, Zinc CR+3 Plated, Phillips® Drive
BBI 586776 Fully Threaded Machine Screw, 5/16-18, 4-1/2 in OAL, Flat Head, Zinc CR+3 Plated, Phillips® Drive
6-32" X 1" USS Stainless Steel Phillips Flat Head Machine Screw
ITM 309BP5664 Brad Point Drill Bit, 7/8 in Dia, 8-1/8 in OAL, 3/8 in Shank
