Milwaukee Tool

The 2767 M18™ FUEL™ high torque 1/2 in impact wrench with friction ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1000 ft-lb of fastening torque and 1400 ft-lb of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industry's most compact cordless High Torque Impact Wrench at 8.39 in L, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL™ with Bolt Removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 rpm once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 in friction ring anvil. A premium rubber over mold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

LAMBSWOOL COMPOUND PAD-MWK49361500 >

LARGE DRILL CHUCK KITS-MWK49221550 >

Milwaukee® Laser Distance Meter is a heavy duty distance measuring tool for professional, commercial and industrial applications. The 2281-20 can easily measure distance up to 200 ft with 1/16 in accuracy. The simple user interface makes Laser Distance Meter easy to use. The end bracket allows for accurate measuring from corners and edges. Easily add and subtract values and use five different functions to calculate length, area, volume, indirect measurements and stake out equations.

Milwaukee® Aviation snips are built for long life and durability. Forged blades deliver up to 10X more cuts than cast blades. Bolt lock ensures the blades won't loosen and chrome plating provides rust protection. The flush pivot bolt won't hang up on material for easy use. The metal lock secures the tool for storage and is easily operated with one hand. The offset model features a 45 degree offset handle for clearance over the cut material. Ideal for left or straight cuts.

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee via their website.

The MILWAUKEE® Large Impact Cut Level 3 Nitrile Gloves are ANSI/ISEA Impact Level 2 Rated, and ANSI Cut Level 3 Rated. These nitrile coated gloves have impact rated enhanced TPR added to the back of the hand for added protection. The dipped gloves have a reinforced nitrile coating between the thumb and index finger for enhanced durability in high wear points. They are 18 gauge for high dexterity when handling small objects and have SMARTSWIPE™ touchscreen compatible fingertips to access devices without taking off gloves.

Milwaukee® 28 V 6-7/8 in metal cutting saw, 0740-20, cuts all types of metals such as uni-strut, galvanized pipe, metal studs and black pipe, as well as Hardi-Plank and Durock materials. The saw has a 2-7/16 in maximum depth of cut. The blade spins at 3200 rpm and has an electric brake for quick, repetitive cutting. An LED light and clear guard provides an excellent line of sight for cutting and the rugged construction provides long, trouble-free operation.

No. 3 Morse taper assembly to fit Milwaukee annular cutters 3/4 in. shank.

The 4203 electromagnetic variable speed adjustable base features solid state electronic switching and an 11 in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. The 4203 offers adjustably of 3/4 in. in direction of base length front-to-back and 20 deg right or left of center. Line feedback speed control maintains speed and a motor/magnet lockout prevents de-mag during operation. For use on any flat ferrous material, 1/2 in. and thicker.

This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4297-1 features an 11.5 amp motor with a no.3 morris taper chuck. This two speed unit has 250 and 500 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is too large.

The 4202 electromagnetic variable speed base features solid state electronic switching and a 9 in. drill travel. Feedback speed control maintains speed and a motor/magnet lockout prevents demagnetization during operation. For use on any flat ferrous material, 1/2 in. and thicker.

This combination unit features the 4203 adjustable position, variable speed base and the 4292-1 1-1/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.

This combination unit features the 4202 fixed position variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.

Lightweight with ample power, the 1/2 in. electromagnetic drill press motor is ideal for drilling small holes into steel. At just 8 Lbs., this lightweight 6.2 amp motor still provides plenty of power to deliver 600 RPM and produce up to 1650 Lbs. of drill point pressure with a 1 in. steel plate. This unit features a 1/2 in. chuck for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the 4202 fixed position base (sold separately) for best results.

The major floor tool accommodates interchangeable 14 in. inserts and replacements. Two quick turn thumb screws make changing attachments quick and easy. Supplied with bumper 49-90-0610 to protect furniture and walls from bumps and scratches. Attaches to double bend floor wand 49 to 90 - 1000.

Milwaukee® 3-flat Secure-Grip™ hammer drill bits drill faster and last longer than others on the market. The 3-flat Secure-Grip™ shank fits in all 1/2 in 3-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications, the bit provides superior performance through its reinforced flute geometry and carbide tip design. Milwaukee® offers a complete range of 3-flat Secure-Grip™ hammer drill Bits in diameters from 1/8 to 1 in with lengths upto 18 in.

Milwaukee® 3-flat Secure-Grip™ hammer drill bits drill faster and last longer than others on the market. The 3-flat Secure-Grip™ shank fits in all 1/2 in 3-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications, the bit provides superior performance through its reinforced flute geometry and carbide tip design. Milwaukee® offers a complete range of 3-flat Secure-Grip™ hammer drill Bits in diameters from 1/8 to 1 in with lengths upto 18 in.

The MILWAUKEE® Large Impact Cut Level 3 Nitrile Gloves are ANSI/ISEA Impact Level 2 Rated, and ANSI Cut Level 3 Rated. These nitrile coated gloves have impact rated enhanced TPR added to the back of the hand for added protection. The dipped gloves have a reinforced nitrile coating between the thumb and index finger for enhanced durability in high wear points. They are 18 gauge for high dexterity when handling small objects and have SMARTSWIPE™ touchscreen compatible fingertips to access devices without taking off gloves.

MEN'S XXL JACKET WITH HEATED KIT-MWK2171XXL>

The Milwaukee® fleece lined knit hat features a fleece band around the ears to block wind and provide extra warmth in cold conditions. Beanie style construction allows for easy use under a hard hat. Durable 98% polyester, 2% spandex construction resists snagging and manages moisture to help prevent sweating and overheating. Product intended for cold weather use.

Milwaukee® 22-18-0800 Brush Service Kit, For Use With 5366-1 Serial 793D 3/4 in Rotary Hammer

Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.

Milwaukee® 7 pc. Metric hollow shaft nut drivers feature universal driver heads which fit 4X more fasteners including: square, hex, 12 point & spline. Designed for maximum durability the wrench ready hex steel shanks are forged and chrome plated. Milwaukee nut drivers are designed for the jobsite and include Milwaukee's Limited Lifetime Warranty.