Milwaukee Tool
Milwaukee NUTDRIVER SET-USE "MWK" 48-22-2547
Milwaukee® 7 pc. SAE HollowCore™ magnetic nut drivers feature a thread-thru design for unlimited depth in threaded rod and long bolt applications. The magnetic universal driver heads fit 4X more fasteners including: square, hex, 12 point & spline. Designed for maximum durability the wrench ready hex steel shanks are forged and chrome plated. Milwaukee nut drivers are designed for the jobsite and include Milwaukee's Limited Lifetime Warranty.
Milwaukee NUTDRIVERS--USE "MWK" 48-22-2554
Milwaukee® HollowCore™ Magnetic nut drivers feature a thread-thru design for unlimited depth in threaded rod and long bolt applications. The magnetic universal driver heads fit 4X more fasteners including: square, hex, 12 point & spline. Designed for maximum durability the wrench ready hex steel shanks are forged and chrome plated. Milwaukee nut drivers are designed for the jobsite and include Milwaukee's Limited Lifetime Warranty.
Milwaukee NYLON BRISTLE VACCUM NOZZLES MWK 49-90-0760
The heavy duty nylon bristle brush has a cast aluminum body for durability and a wide mouth for fast dust pickup. It offers a 10 in cleaning path. Compression fits a 1-1/2 in ID Hose.
Milwaukee OFFSET DRIVE ADAPTERS MWK 48-32-2100
Use the power and speed of your 2.4 V cordless screwdriver to fasten or remove screws in light applications up to 400 rpm. A durable die cast construction accepts 1/4 in magnetic bits. The thumb flange allows 360 deg rotation. Achieves a maximum of 100 in-lb torque.
Milwaukee P2-1/2" GUIDE PLATES MWK 48-20-6158
Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.
Milwaukee P2" GUIDE PLATES MWK 48-20-6157
Use with 48-20-6155 center pin and 48-20-5035 thin wall core bit.
Milwaukee PHENOLIC BACKING PADS MWK 49-36-6000
7" X 5/8" -11 PHENOLIC BACKING PAD-MWK49366000 >
Milwaukee POLISHER KITS--USE "MWK" 2438-22-X
Milwaukee® tool continues to expand its 12 V Lithium-Ion system with the introduction of the new M12™ variable speed polisher sander. Optimized to provide the fastest and most precise detail work, the new tool performs the work of two tools in one by easily switching between polishing and sanding modes. As the most compact cordless polisher on the market, the M12™ polisher sander is the perfect complement to a full size polisher for a faster finish. Featuring dual mode control and a variable speed trigger, the M12™ polisher sander delivers increased user control, regardless of the application. A tool-free accessory change allows the user to quickly change between polishing and sanding accessories.
Milwaukee PORTABLE BANDSAW CAM FOLLOWERS MWK 02-25-0260
PORT. BANDSAW CAM FOLLOWER-MWK02250260 >
Milwaukee PORTABLE BANDSAW TABLES MWK 48-08-0260
Converts Milwaukee's portable band saws to stationary units. Can be mounted on a work bench or used on the job with 3/4 in. diameter pipe for legs (not included). Heavy duty clamping chain and crank nut easily secures all shapes of material. DOES NOT COME WITH the 3/4 in. pipe legs.
Milwaukee POWER TOOL CARBON BRUSHES--PK/2 MWK 22-18-2240
POWER TOOL CARBON BRUSHES--PK/2-MWK22182240>
Milwaukee POWER TOOL CARBON BRUSHES--PK/2 MWK 22-18-2250
POWER TOOL CARBON BRUSHES--PK/2-MWK22182250>
Milwaukee POWER TOOL GASKETS MWK 43-44-0605
Milwaukee® 43-44-0605 Base Gasket, For Use With 4120 Serial A09A Large Base Dymorig
Milwaukee POWER TOOL SWITCHES MWK 23-66-0020
Milwaukee® 23-66-0020 Switch, For Use With 6175 14 in Cut-Off Machine
Milwaukee QT SIZE CAULK GUN HOUSINGS MWK 48-08-1080
For the larger job, this quart size carriage will provide longer runtime between tube changes. It fits on all 6560 and 6562 series Milwaukee® cordless caulk and adhesive guns. (For replacement plunger rod: model number 49-52-0650), 30 oz cartridge holder kit.
Milwaukee QUICK CHANGE ADAPTERS MWK 48-66-0061
Milwaukee impact duty socket adapters are engineered for extreme durability and up to 10x life. Made from proprietary steel and heat treated to control hardness, the impact duty socket adapters provide fastening capabilities with all impacts. Broadly targeting cordless users, the impact duty accessory line is not only ideal for heavy duty impact applications, but delivers a full system solution for all the users drilling and fastening needs.
Milwaukee R/ANGLE DRILLS--USE "MWK" 2808-20
The M18™ FUEL™ HOLE HAWG® right angle drill from Milwaukee® drills faster than the original corded HOLE HAWG®, delivers over 150 deg F/-18 deg C and have a battery fuel gauge to display the remaining charge and is over 30% lighter weight than its corded predecessor. The QUIK-LOK™ chuck is designed for quick, keyless, one-handed bit changes and is compatible with 7/16 in hex flat or groove shank bits. Optimized for electricians, the M18™ FUEL™ HOLE HAWG® is the first cordless tool of its kind, delivering game-changing productivity for professionals drilling with augers upto 1-1/4 in and self-feed bits upto 2 in The POWERSTATE™ brushless motor delivers better performance than corded drills, especially under heavy load. REDLINK™ Plus™ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. The REDLITHIUM™ XC5 batteries provide upto 2.5X more runtime and recharges than standard lithium, operate down to 0 deg F/-18 deg C and have a battery fuel gauge to display the remaining charge.
Milwaukee R/HAMMER BIT--USE "MWK" 48-20-4330
Milwaukee® Spline 2-cutter Rotary Hammer drill bits are used for drilling intro brick, block and concrete.
Milwaukee R/HAMMER BIT--USE "MWK" 48-20-4360
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee R/HAMMER BIT--USE "MWK" 48-20-4365
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee RATCHETING FULL-BRIM WHITE HARDHAT MWK 48-73-1221
The MILWAUKEE® BOLT™ Front Brim Vented Hard Hats with 6-Point Suspension - Type 1, Class C is designed to adapt to your jobsite. Four BOLT™ accessory slots and two universal accessory slots allow you to easily integrate additional personal protection equipment and accessories onto the hard hat. This Milwaukee® hard hat includes an adjustable swinging ratchet for better comfort and has a 6-point ratcheting suspension for quick adjustment. The head protection also includes a moisture-wicking sweatband to stay cool and dry fast. These construction hard hats are ANSI/CSA approved and can be customized by adding your logo.
Milwaukee REAR BLADE GUIDE FOR 6230 MWK 42-28-0211
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.
Milwaukee RECHARGEABLE HEADLAMP MWK 2111-21
The Milwaukee® USB rechargeable hard hat headlamp delivers 475 Lumens of TRUEVIEW™ high definition output and is capable of all day runtime, over 2000 recharges and 3X faster charging via USB. Optimized for use with hard hats, its slip resistant strap and clips provide easy and secure attachment. A water, dust and drop resistant body and lens allows it to withstand the toughest conditions. Get maximum control over output, beam coverage and runtime with five different modes, flood, spot and spot/flood beam patterns and up to 31 hr of runtime. The REDLITHIUM™ USB Battery can be recharged in the light via Micro USB or swapped out with additional REDLITHIUM™ USB batteries for virtually no downtime.
Milwaukee RECIPROSAW KITS--USE "MWK" 2821-21
The M18™ FUEL™ SAWZALL® reciprocating saw cuts faster than its corded counterparts and offers upto 2X more runtime and 5X longer tool life than competitive saws. The POWERSTATE™ brushless motor provides cutting power that has only been associated with corded tools. The M18™ REDLITHIUM™ XC5 extended capacity battery pack delivers upto 2 5X runtime and provides more work per charge and more work over the life of the pack than competitive batteries the saw's REDLINK™ Plus™ intelligence ensures optimized performance and protection from overloading, overheating and over discharging. The 18 V Lithium-Ion SAWZALL® features an adjustable shoe, integrated LED light and a hang hook for convenient storage on the job.
Recently Viewed
BBI 310081 79NE Standard Lock Nut, 1/4-28, Stainless Steel, A2/18-8 Material Grade, Right Thread
BBI 310081 79NE Standard Lock Nut, 1/4-28, Stainless Steel, A2/18-8 Material Grade, Right Thread
5/16"-18 USS Reversible Locknuts
HCI Preferred Supplier FF12M FF Series Pipe Plug, 3/8 x 1/2 in Nominal, FNPT, PTFE Seal/Steel
HCI Preferred Supplier FF12M FF Series Pipe Plug, 3/8 x 1/2 in Nominal, FNPT, PTFE Seal/Steel
4-CELL C/D XENON BULBS-MGLLMXA401>
Milwaukee® 48-27-0311 Flat Boring Bit, 5/16 in Dia, 6 in OAL, Flat Flute, 1/4 in Shank
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee® 5/16 in. x 6 in. flat boring bit. This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and Formica. This bit offers a 6 in. drilling depth but can be used with a 12 in. extension (48-28-3350) for extended deep-hole drilling. 3/16 in. shank diameter.
Milwaukee® 48-25-2002 Standard Self-Feed Bit, 2 in Dia, 6 in OAL, 7/16 in Shank
Milwaukee® Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. Two feed screws are included.
