Milwaukee Tool
Milwaukee #2 PH X 120MM HEX INSERTBIT MWK 48-30-1521
#2 PHILLIPSX120-MM HEX INSERT BIT-MWK48301521 >
Milwaukee #2 PHILLIPS 1/4 HEX BIT MWK 48-30-1520
#2 PHILLIPS 1/4" HEX BIT-MWK48301520 >
Milwaukee #2 PHILLIPS BITS MWK 48-32-1040
#2 RED SHANK PHILLIPS BITS-MWK48321040 >
Milwaukee #2 PHILLIPS SCREWDRIVERS MWK 48-22-2815
Featuring an anti-peel handle design, hardened tips & forged shanks the Milwaukee® cushion grip screwdrivers provide professional grade solutions and durability to the user. The tactile identification, a new-to-world innovation allows users to accurately select the correct driver without looking. The wrench-ready bolster and precision knurling offers users the features needed to increase efficiency and effectiveness.
Milwaukee #3 MORSE-TAPER "MT" ARBOR ASSEMBLY MWK 49-57-0010
Steel Hawg® arbor with No. 3 Morse taper shank for use in Milwaukee magnetic drill motors (models 4292-1 and 4297-1). This arbor adapts threaded Steel Hawg® cutters to a no. 3 internal Morse taper motor. For best cutting results use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Order oil hose(43-75-0010) and hand pump (44-46-0090) separately to distribute cutting fluid during drilling.
Milwaukee #3 PHILLIPS BITS MWK 48-32-1070
#3 PHILLIPS SCREW-SHOOTER BITS-MWK48321070 >
Milwaukee #5192 DIE GRINDER TOGGLE SWITCHES MWK 23-66-2190
Milwaukee® 23-66-2190 Switch, For Use With 6805 Serial 709C 16 AWG Shear
Milwaukee #5540 SANDER/POLISHER PADS MWK 49-36-2500
#5540 SANDER/POLISHER PAD-MWK49362500 >
Milwaukee #6230 BANDSAW FRONT HANDLES MWK 31-44-0330
6230 BANDSAW FRONT HANDLE-MWK31440330 >
Milwaukee #6480-20 PANEL SAW EXTENSION MWK 49-22-8108
The 49-22-8108 extension kit is used with Milwaukee's 6480-20 panel saw and is recommended whenever material over 6 ft. in length will be cut frequently. The kit extends the roller material carriage 18 in. on each end making the overall roller material carriage 8 ft. in length.
Milwaukee #6851 SPEED CONTROL SWITCHES MWK 23-66-1253
Milwaukee® 23-66-1253 Speed Control Switch, For Use With 6850 18 AWG Swivel Head Shear
Milwaukee #6890 NIBBLER PUNCHES MWK 48-44-0260
This item is the replacement punch for Milwaukee's 16 gauge nibbler model 6890. The replacement die, 48-44-0270, is purchased separately. Must be used with plate wrench 49-96-4725 to remove the protective collar and 49-96-0330 2.5 mm wrench to remove the punch.
Milwaukee 1-1/2" CARBIDE THICK WALL CORE BIT MWK 48-20-5125
Milwaukee®'s SDS Max and Spline thick wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
Milwaukee 1-1/2" CARBIDE TOOTH HOLESAWS MWK 49-57-8227
Specifically designed for hand held operations in materials up to 3/8 in. thick, these Carbide tipped steel plate cutters stay sharper longer than high speed steel or bi-metal hole saws. They produce drill press quality holes even in hand held operations. For cutting materials over 3/8 in. up to a depth of 1/2 in., a drill press is recommended. When cutting depth is over 1/4 in., use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution.
Milwaukee 1-1/2" CARBIDE TWO-PIECE CORE BITS MWK 48-20-5025
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
Milwaukee 1-1/2" DIA CONCRETE CORE BIT MWK 48-16-1507
1-1/2" DIAMOND CONCRETE CORE BITS-MWK48161507 >
Milwaukee 1-1/2" GUIDE PLATES MWK 48-20-6153
Use for starting a 1-1/4 in. hole drill to a depth of approximately 1/4 in., stop hammer, remove guide plate and center pin. Place core bit back into the grooved area and resume drilling to required depth of hole. Adds bit stability and reduces bit walk.
Milwaukee 1-1/2" SCALING CHISELS MWK 48-62-6020
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Cleans concrete, scale, rust, cuts troughs and some asphalt. This chisel is specifically designed for SDS Plus rotary hammers and should be used in hammer only mode.
Milwaukee 1-1/2" V/CLEANER ASSY KITS MWK 49-90-1810
For less abusive environments where metal attachments are not required, this general purpose cleaning kit includes plastic attachments. The kit includes: 49-90-1865 chromed metal 2-piece floor wand, 49-90-1770 plastic crevice tool, 49-90-1775 6 in plastic utility nozzle, 49-90-1845 plastic 14 in squeegee insert, 49-90-1850 plastic 14 in carpet insert, 49-90-1840 plastic master floor tool, 49-90-1860 plastic round dust brush, 49-90-1855 plastic 14 in brush insert. Fits 1-1/2 in ID Hoses. All inserts snap lock into master floor tool.
Milwaukee 1-1/2" X 12"-LENGTH SCALING CHISEL MWK 48-62-2040
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Scaling chisels are ideal of cleaning concrete and removing scale and rust. Additionally, scaling chisels can be used for cutting troughs and some asphalt. The widened tip design allows for faster surface material removal. This chisel is specifically designed for spline rotary hammers and should be used in hammer only mode.
Milwaukee 1-1/2" X 16" SPLINE R/H BITS MWK 48-20-4150
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee 1-1/2" X 22" SPLINE R/H BITS MWK 48-20-4151
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee 1-1/4" 120-VOLT REVERSIBLE DRILLS MWK 2404-1
The most hand-held power available in a specialty drill. Part of Milwaukee® super hole Shooter line, the 1-1/4 in large drill delivers versatile portable power for the toughest drilling and auger applications. The drill is furnished with a powerful Milwaukee® built motor and a #3 internal Morse taper socket. Poly chrome alloy steel gears produce high torque with minimum wear. You will get quiet performance from the heat treated, helical cut gears. The extra long switch handle and pipe handle provide maximum leverage and added control.
Milwaukee 1-1/4" CARBIDE-TOOTH HOLESAW MWK 49-56-1253
Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.
