Milwaukee Tool
Milwaukee 1/2"X10"X16" SPLINE ROTOHAMMER BIT MWK 48-20-4051
Milwaukee®'s Spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee 1/2"X16"X22" SPLINE ROTOHAMMER BIT MWK 48-20-4052
Two cutter Spline bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in two cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 3/8 in. to 1-1/2 in. diameters as well as metric diameters. One per package.
Milwaukee 1/2"X4X6 3-FLAT MASONRY BIT MWK 48-20-8830
Milwaukee® 3-flat Secure-Grip™ hammer drill bits drill faster and last longer than others on the market. The 3-flat Secure-Grip™ shank fits in all 1/2 in 3-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications, the bit provides superior performance through its reinforced flute geometry and carbide tip design. Milwaukee® offers a complete range of 3-flat Secure-Grip™ hammer drill Bits in diameters from 1/8 to 1 in with lengths upto 18 in.
Milwaukee 1/4" CARB/TIP HOLESAW PILOT DRILLS MWK 49-56-8005
Milwaukee® Carbide tipped pilot bits are designed for long life in abrasive materials. Use for drilling fiberglass, brick, block and tile.
Milwaukee 1/4" COLLET NUT MWK 48-68-0031
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
Milwaukee 1/4" DIE GRINDER COLLETS MWK 48-66-0975
1/4" DIE GRINDER COLLETS-MWK48660975 >
Milwaukee 1/4" DRILL CHUCK ATTACHMENTS MWK 49-22-1560
This replacement 1/4 in. chuck comes as standard equipment with the 6540-1 2.4 Volt single speed cordless screwdriver as well as 2-speed models (6547-1 and 6547-22). This chuck allows the same flexibility in drilling and driving capabilities as a driver drill or corded drill with a three jawed chuck. Includes chuck key.
Milwaukee 1/4" HEXDRIVERS--USE "MWK" 2957-20
The M18™ FUEL™ 1/4 in. Impact driver with ONE-KEY™ is the fastest, most compact, and most powerful tool in its class. The POWERSTATE™ brushless motor produces up to 2,000in-lbs of torque, delivering up to 30% faster driving speed, increasing productivity for the most demanding fasteners on the job. At only 4.59 in. in length, this is the most compact impact driver in its class, allowing better access in tight spaces. REDLINK Plus™ intelligence ensures maximum performance while protecting from overloads, heating and over-discharge. The M18™ REDLITHIUM™ battery packs (not included) deliver more work per charge and more work over the life of the packs than competitors. With ONE-KEY™, users gain the ability to customize, track and manage their tool. Save up to 4 task settings directly to the tool. Self-tapping screw mode provides faster installation time, shutting the tool down as soon as the fastener is seated to reduce damage to fasteners and materials. Using the tool's tracking functionality, if ever lost or stolen, lock it out to protect your investment.
Milwaukee 1/4" HOLESAW ARBOR PILOT DRILLBITS MWK 49-56-8000
Milwaukee® 49-56-8000 Pilot Bit, 1/4 in Arbor, High Speed Steel
Milwaukee 1/4" HOLESAW PILOT DRILLBITS MWK 49-56-8002
Milwaukee® 49-56-8002 Pilot Drill, 1/4 in Drill - Fraction, 1/4 in Drill - Decimal Inch, HSS
Milwaukee 1/4" MAS/BIT--USE "MWK" 48-20-9010
Milwaukee® 3-flat Secure-Grip™ hammer drill bits drill faster and last longer than others on the market. The 3-flat Secure-Grip™ shank fits in all 1/2 in 3-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications, the bit provides superior performance through its reinforced flute geometry and carbide tip design. Milwaukee® offers a complete range of 3-flat Secure-Grip™ hammer drill Bits in diameters from 1/8 to 1 in with lengths upto 18 in.
Milwaukee 1/4" TO 7/8" STEP UNIBITS MWK 48-89-9115
7/8" SINGLE HOLE STEP DRILLBIT/UNIBIT - MWK48899115>
Milwaukee 1/4" X 1-5/16" USS FIL TAP MWK 06-82-3060
Milwaukee® 06-82-3060 Taptite Fillister/Pan Head Screw, For Use With 6232-51 Serial 678F 120 mm Deep Cut 2-Speed Band Saw, 1/4-20 x 1-5/16 in, T-30
Milwaukee 1/4" X 1" USS LH S/H CAPSCREW MWK 06-75-3150
Milwaukee® 06-75-3150 Left Hand Thread Socket Head Screw, For Use With 1007-1 Serial 628E, 1250-1 Serial 459D 1/2 in Reversing Drill and Keyed Chuck, 1/4-20 x 1 in
Milwaukee 1/4" X 6" HAMMERDRILL BITS MWK 48-20-6811
HAMMERDRILL DRILLBIT-MWK48206811 >
Milwaukee 1/4"-7/8"-1-1/8" STEP UNIBIT MWK 48-89-9135
1/4" -7/8" -1-1/8" STEP DRILLBIT - MWK48899135 >
Milwaukee 1/4"-HEXDRIVERS--USE "MWK" 2953-20
The M18™ FUEL™ 1/4 in hex impact driver is the most powerful tool in its class. At 1800 in-lb of fastening torque, this tool drives screws faster but also provides greater control Over power and speed thanks to its proprietary 4-mode DRIVE CONTROL™. The POWERSTATE™ brushless motor delivers up to 0 to 3000 rpm with constant power output to drive screws faster. REDLINK™ Plus™ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM™ compact batteries or extended capacity batteries (sold separately), which deliver more work per charge and more work Over the life of the pack than competitive batteries on the market. The 4-mode DRIVE CONTROL™ provides greater control Over output speed and power for greater versatility by delivering 0 to 850 rpm in mode 1 0 to 2100 rpm in mode 2 and 0 to 3000 rpm in mode 3. Self-tapping screw mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
Milwaukee 1/4"-SHANK HOLESAW ARBORS MWK 49-56-6960
Milwaukee® 49-56-6960 Hole Saw Arbor, For Use With 9/16 to 1-3/16 in Dia Hole Saws
Milwaukee 1/4"X4" A-TAPER R/HAMMER BIT MWK 48-20-3250
1/4" X 4" A-TAPER ROTARY HAMMER BIT--DISC-MWK48203250 >
Milwaukee 1/8" TO 1/2" STEP UNIBITS MWK 48-89-9100
1/8" - 1/2" STEP DRILLBIT/UNIBIT - MWK48899100>
Milwaukee 10-1/4" 40-T CIR/SAW BLADES MWK 48-40-4172
Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.
Milwaukee 10-1/4" CARBIDE C/SAW BLADE MWK 48-40-4170
Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.
Milwaukee 10-1000-V VOLTAGE DETECTORS MWK 2203-20
The Milwaukee 10-1000V dual range voltage detector is the first non-contact voltage detector with the ability to light up, detect, and differentiate automatically. The expanded sensitivity range of 10-49V offers the ability to detect voltage in common systems that would normally go undetected when using a standard voltage detector. These systems include: LED lighting, fire detection & suppression systems, HVAC controls, and security & access controls, along with many others. The 10-1000V dual range voltage detector not only detects, but also differentiates 10-49V from the standard voltage range of 50 to 1000 V. it does so by using a uniquely colored LED indicators and audible tones, delivering the clearest indication of these two voltage ranges. A built-in LED work light allows for increased visibility in low-lit areas, and automatic shut-off after 5 minutes helps preserve battery life. The 10-1000V dual range voltage detector is a best-in-class voltage detection solution for any electrician, HVAC technician, or facilities maintenance technician.
Milwaukee 10-24" X 1/2" PAN TORX SCREWS MWK 06-82-8864
10-24X1/2" PAN TORX SCREW -MWK06828864 >
Recently Viewed
Proto® J9209 Nut Driver, 9/32 in, Solid Round Shank, Yellow Fluted Handle, ASME B107.110-2012, Polished Chrome
Dual-Lite® CCRRC CC Series Combination Round Universal Face Emergency Light/Exit Sign, 120/277 V AC, White Housing, EXIT Legend
The CC series offers quality and value with a compact and attractive LED based combination emergency exit. The white or black housing and Lamp heads are made of high impact UL flame rated thermoplastic. Snap together canopy, housing and removable chevrons for quick and easy installation. Universal single or double-face. Remote capacity unit will run a double head remote or 2 single head remotes of either the Compass® CIR or COR series.
24 20-WATT DOUBLE PIN FLUORESCENT BULBS-BULF20T12D >
KLEIN TOOLS 50211 Speedway Flat-Steel Fish Tape Cable Puller 120 Feet
120' FISHTAPE WITH REEL
SHATTER SHIELD BULB-BULF28T8/841/XP/SS>
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
Narrow cabinet tip permits blade access where space is limited
