Milwaukee Tool
Milwaukee® 5340-21 Dual Mode Corded Rotary Hammer Kit, 2 in Keyed/Spline Chuck, 975 to 1950 bpm, 125 to 250 rpm No-Load, 6 in Max Core Bit Compatibility, 2 in Max Solid Bit Capacity, 27-1/2 in OAL
Perform a variety of digging and drilling jobs on floors or the ground with this heavy duty INLINE™ design. The 2 in spline drive rotary hammer delivers 19.9 ft-lb of blow energy for drilling large holes in concrete or asphalt, bushing, driving ground rods, scraping floors, digging and tamping. The INLINE™ design offers more comfortable operation and the soft-grip side-handle can be attached in three positions - including the rear switch handle - to minimize bending. A system of anti-vibration absorption and reduction components decreases operator fatigue. Sophisticated electronic feedback offers consistent operation and overload protection. This robust electric hammer features a variable speed dial for optimum control and a service reminder light the tool uses standard spline and round/hex accessories and comes with a carrying case.
Milwaukee® 5339-21 1-Mode Demolition Corded Hammer Kit, 975 to 1950 bpm, 1-1/2 in Chuck
Ergonomic in-line design lets you dig and drill more comfortably. The SDS Max® demolition hammer delivers 19.9 ft-lb of blow energy for drilling large holes in concrete or asphalt, bushing, driving ground rods, scraping floors, digging and tamping. The in-line design offers more comfortable operation and the soft-grip side handle can be attached to the rear switch handle to minimize bending. Milwaukee® unique anti-vibration system provides added comfort by minimizing vibration. Sophisticated electronic feedback offers consistent operation and overload protection. This robust electric hammer features a variable speed dial for optimum control, a service reminder light and easy access for maintenance. You can position chisels more efficiently with the SDS Max® bit holder system. The tool uses standard SDS Max® hammer iron and comes with two auxiliary handles and a carrying case.
Milwaukee® 5318-DE Standard Chisel Boot, For Use With SDS Max® Rotary Hammers, 1 in W Blade, 5-3/4 x 3-1/2 in Shank, Plastic
The Milwaukee 5318-DE SDS max chisel boot provides users with a solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153). The 5318-DE SDS max chisel boot is optimized for the 2717-22 and 5317-21 Milwaukee SDS max rotary hammers for chipping applications with bull point and flat chisels up to 1-1/8 in. in diameter. Its adjustable strap secures the hose away from the application allowing for increased productivity. Attach to the Milwaukee 8960-20 8 Gallon dust extractor for a complete OSHA table 1 compliant solution.
Milwaukee® 5317-21 Corded Rotary Hammer Kit, 1-9/16 in SDS Max® Chuck, 3000 bpm, 450 rpm No-Load, 4 in Max Core Bit Compatibility, 1-9/16 in Max Solid Bit Capacity, 17-3/8 in OAL
Get durability, performance and constant power technology (CPTTM) for your toughest applications. The 1-9/16 in. SDS-Max rotary hammer offers a heavy-duty 5.5 ft-lbs of impact energy for solid performance, even when drilling in hard aggregate. Constant power technology ensures consistent drilling power for the toughest applications handled by electrical, mechanical, plumbing, HVAC and general construction contractors. A 12-position chipping adjustment lets you maintain the optimum hammer position while chipping in any orientation. A mechanical clutch protects the motor when the bit binds, and two-mode operation offers maximum versatility regardless of the application. The tool comes with a side handle and carrying case.
Milwaukee® 5316-21 Corded Rotary Hammer Kit, 1-9/16 in Spline Chuck, 3000 bpm, 450 rpm No-Load, 4 in Max Core Bit Compatibility, 1-9/16 in Max Solid Bit Capacity, 17-3/4 in OAL
Get optimal power for concrete drilling and chipping applications. The 1-9/16 in. spline rotary hammer offers a heavy-duty 5.5 ft-lbs of impact energy, plus 450 RPM and 3,000 bpm for fast, solid performance, even when drilling in hard aggregate. Constant power technology (CPTTM) ensures consistent drilling power for the toughest applications handled by electrical, mechanical, plumbing, HVAC and general construction contractors. A 12-position chipping adjustment lets you maintain the ideal hammer position while chipping in any orientation. A mechanical clutch protects the motor when the bit binds, and two-mode operation offers maximum versatility regardless of the application. The tool comes with a side handle and carrying case.
Milwaukee® 5268-21 Reversing Corded Rotary Hammer Kit, 1-1/8 in SDS Max® Chuck, 5500 bpm, 1500 rpm No-Load, 4 in Max Core Bit Compatibility, 1-1/8 in Max Solid Bit Capacity, 12-1/2 in OAL
Get up to 85% faster drilling and 85% harding hitting while reducing vibration to only 10.6 m/s2. With a powerful 8 amp motor, this rotary hammer delivers 0-1, 500 RPM, 0-5,500 bpm and 3.6 ft-lbs of impact energy. This tool also has an all metal gear case and mechanical clutch to provide maximum durability. At only 12-1/2 in. inches long and 7-1/2 lbs, this tool makes for a very powerful and lightweight 1-1/8 in. 3-mode rotary hammer. The kit includes a side handle, depth rod and carrying case.
Milwaukee® 5263-21 Reversing Corded Rotary Hammer Kit, 5/8 in SDS Max® Chuck, 4400 bpm, 0 to 3700 rpm No-Load, 2-1/8 in Max Core Bit Compatibility, 5/8 in Max Solid Bit Capacity, 10-9/16 in OAL
The most compact 5/8 in. hammer drill on the market is 30% lighter and 65% faster – with plenty of drilling power. At just 10.9 in. long and 4.6 Lbs., Milwaukee Tool 5/8 in. SDS-Plus rotary hammer makes drilling overhead and in tight spaces easier, yet it’s powerful enough for most professional applications. With a 5.5 amp motor, it delivers 0-3, 700 RPM, 0-4,400 bpm and 1.5 ft-lbs of torque. The innovative gear design and a drop motor provide unmatched balance, while Milwaukee's unique anti-vibration system provides added comfort by minimizing vibration. A mechanical clutch protects the motor when the bit binds, and two-mode operation offers maximum versatility regardless of the application. The kit includes a side handle, depth rod and carrying case.
Milwaukee® 5262-21 Reversing Spline Drive Corded Rotary Hammer Kit, 7/8 in SDS Max® Chuck, 5625 bpm, 1500 rpm No-Load, 2-1/2 in Max Core Bit Compatibility, 1 in Max Solid Bit Capacity, 17 in OAL
Get up to 40% faster drilling and 15% more life, even in the toughest applications. Designed for the toughest applications, the 1 in. SDS-Plus D-handle rotary hammer lasts longer and drills faster than other tools in its class. With a powerful 8 amp motor, it delivers 0-1, 620 RPM, 0-5,860 BPM and 2.1 ft-lbs of torque. You’ll get superior drilling speed without sacrificing the power needed to drill larger holes. At just 6.1 Lbs., this rotary hammer is easy to use and helps avoid user fatigue. A mechanical clutch protects the motor when the bit binds, and three-mode operation offers maximum versatility. The kit includes a side handle, depth rod and carrying case.
Milwaukee® 5243 Straight Die Grinder, 6 in Dia Wheel, 5500 rpm Speed, 120 VAC/VDC, For Wheel: Type 6, Trigger Lock Switch
A coated spindle housing make this heavy duty, Milwaukee® straight grinder comfortable to hold on to while delivering an extra heavy duty 15 A of power and 5500 rpm equipped with a hinged face plate with wing nut fasteners for easy wheel changes, this tool can accept up to 6 in resinoid bond wheels. Wire brushes can also be attached for cleaning rust from work surfaces, as well as buffing wheels for polishing. An impact absorbing tool rest is provided so that the tool can be set down safely as the wheel coasts to a stop. The spindle is 5/8 in for use with industry standard accessories for the rated diameter capacity. This tool can be converted to a Tuck point grinder by purchasing the appropriate guard and type 1-wheel.
Milwaukee® 5223 Straight Die Grinder, 5 in Dia Wheel, 7000 rpm Speed, 120 VAC/VDC, For Wheel: Type 5, Trigger Lock Switch
A coated spindle housing make this heavy duty, Milwaukee® straight grinder comfortable to hold on to while delivering a full 12 A of power and 7000 rpm this tool can accept up to 5 in resinoid bond wheels. Wire brushes can also be attached for cleaning rust from work surfaces as well as buffing wheels for polishing surfaces. An impact absorbing tool rest is provided so that the tool can be set down safely as the wheel coasts to a stop. The spindle is 5/8 in for use with industry standard accessories for the rated diameter capacity.
Milwaukee® 5211 Straight Die Grinder, 3 in Dia Wheel, 14500 rpm Speed, 120 VAC/VDC, For Wheel: Type 3, Trigger Lock Switch
A coated spindle housing make this heavy duty, Milwaukee® straight grinder comfortable to hold on to while delivering a full 11 A of power and 14500 rpm equipped with a hinged face plate with wing nut fasteners for easy wheel changes, this tool can accept up to 3 in resinoid bond wheels. Wire brushes can also be attached for cleaning rust from work surfaces. An impact absorbing tool rest is provided so that the tool can be set down safely as the wheel coasts to a stop. The spindle is 3/8 in for use with industry standard accessories for the rated diameter capacity.
Milwaukee® 5196 Heavy Duty Die Grinder, 6 in Dia Wheel, 14500 rpm Speed, 120 V AC/DC, For Wheel: Type 2, ON/OFF Trigger Switch
This Milwaukee die grinder offers more power for heavy duty jobs. The 5196 comes with a 1/4 in. collet but will accept 1/8 in. collet as well. A full array of mounted points allows you to grind many shapes and diameters. At 16,000 RPM with an 11 amp motor, this tool attacks even the toughest grinding jobs. A maximum 2 in. reinforced or non-reinforced wheel can be attached to this versatile grinder for deburring and shaping larger work pieces. Operated by a trigger switch on the back handle.
Milwaukee® 5194 Lightweight Die Grinder, 2 in Dia Wheel, 21000 rpm Speed, 120 VAC/VDC, For Wheel: Type 2, Paddle Switch
The 4.5 amp die grinder offers 21,000 RPM of grinding power in a streamlined, lightweight design. Attach mounted wheels and points up to 1-5/8 in. and reinforced wheels up to 2 in. for grinding, shaping and deburring workpieces of various shapes and diameters. The grinder includes a 1/4 in. collet and will also accept a 1/8 in. collet for increased utility. It features all ball and roller bearings for durability, and a paddle switch operated with body grip control. The tool comes with open-end wrenches in 11/16 in. and 1/2 in. sizes.
Milwaukee® 5192 Die Grinder, 2 in Dia Wheel, 21000 rpm Speed, 120 VAC/VDC, For Wheel: Type 2, ON/OFF Toggle/Lock-On Switch
Grinding in tight places around irregular surfaces is the specialty of this Milwaukee die grinder. The 5192 comes with 1/4 in. collet but will accept 1/8 in. collet as well. A full array of mounted points allows you to grind many shapes and diameters. At 21,000 RPM with a 4.5 amp motor, this tool means business. A maximum 2 in. reinforced wheel or 1-5/8 in. non-reinforced wheel can be attached to this versatile grinder for deburring and shaping. On-off toggle switch, flip on and go to work.
Milwaukee® 502R Insulated Wind/Water-Resistant Knit Hat, 1-Size Fits Most, Red, Fleece Lined Polyester, Pull Over Closure
The Milwaukee® fleece lined knit hat features a fleece band around the ears to block wind and provide extra warmth in cold conditions. Beanie style construction allows for easy use under a hard hat. Durable 98% polyester, 2% spandex construction resists snagging and manages moisture to help prevent sweating and overheating. Product intended for cold weather use.
Milwaukee® 49-94-1405 General Purpose Cut-Off Wheel, 14 in Dia x 3/32 in THK, 1 in Center Hole, A36P Grit, Aluminum Oxide Abrasive
Milwaukee's comprehensive offering of grinding and cutting wheels consists of 45 unique products ranging in diameters from 4-1/2 in. to 14 in., with arbor configurations of 7/8 in., 20 mm, 1 in. and 5/8 in. 11. Milwaukee's abrasive offering is manufactured using three types of abrasive grains, aluminum oxide, silicon Carbide, and zirconia alumina, providing products for general purpose to specialized high performance applications.
Milwaukee® 49-93-5250 Cup Wheel, 4 in Dia, 16/24 Grit, Aluminum Oxide Abrasive
Milwaukee® 49-93-5250 Cup Wheel, 4 in Dia, 16/24 Grit, Aluminum Oxide Abrasive
Milwaukee® 49-92-0500 Straight Grinding Wheel, 3 in Dia x 1/2 in THK, 3/8 in Center Hole, 36 Grit, Aluminum Oxide Abrasive
Milwaukee® 49-92-0500 Straight Grinding Wheel, 3 in Dia x 1/2 in THK, 3/8 in Center Hole, 36 Grit, Aluminum Oxide Abrasive
Milwaukee® 49-90-1996 49-90 Flexible Hose, 1-7/8 in Dia Hose x 9 ft L Hose, For Use With Wet/Dry Vacuum, Polypropylene, Black
The MILWAUKEE® 1-7/8" x 9' Flexible Hose is engineered for high-performance efficiency, featuring a swivel mechanism that enhances maneuverability during use. Designed with a dedicated custom rubber gasket, this hose significantly improves air flow and performance, ensuring optimal suction when connected to your Milwaukee NEXUS™ Wet/Dry Vacuum. The gray color ring provides quick identification of its 1-7/8” diameter, making it easy to select the right accessory for your cleaning tasks. With a convenient 9-foot length and a quarter turn design that locks the hose securely in place, you can tackle a variety of applications without interruptions. This flexible hose is a vital addition to your toolkit, designed specifically to enhance the capabilities of Milwaukee NEXUS™ Wet/Dry Vacuums, ensuring you achieve maximum productivity on the job site.
Milwaukee® 49-90-1978 High Efficiency Large Filter, Paper
The MILWAUKEE® Large Wet/Dry Vacuum High Efficiency Filter is engineered for optimal performance, providing an effective solution for tackling a variety of job site debris, including sawdust, drywall dust, and metal shavings. Featuring an easy twist and lock installation, this filter ensures a secure fit, allowing for hassle-free maintenance and operation. Designed to be dry cleanable and washable, the filter is reusable after cleaning, enhancing its longevity and reducing waste on the job site. Included with your purchase is one Large Wet/Dry Vacuum High Efficiency Filter, making it a practical choice for professionals who demand reliability and efficiency in their tools. This filter is compatible with MILWAUKEE® wet/dry vacuums, ensuring you have the right equipment to maintain a clean and safe work environment. With its durable design and high efficiency, the MILWAUKEE® Large Wet/Dry Vacuum High Efficiency Filter is an essential addition for those who prioritize productivity and performance in their daily tasks.
Milwaukee® 49-90-1955 Dust Bag, 0.53 ft, For Use With 8960-20 8 gal Dust Extractor, Fleece
The Milwaukee 49-90-1955 fleece dust bag is compatible with the Milwaukee 8 Gallon dust extractor (8960-20) to capture fine dust. The fleece bag is fully enclosed and acts a pre-filter which will prolong the life of the main filter and minimize dust exposure during disposal. The kit includes 5 fleece dust bags.
Milwaukee® 49-90-1954 Dust Bag, 8 gal, For Use With 8960-20 Dust Extractor, Plastic
The Milwaukee 49-90-1954 plastic dust bag is compatible with the Milwaukee 8 Gallon dust extractor (8960-20) to capture fine dust. The plastic dust bag is designed for easy cleanup and removal of vacuumed dust. The kit includes 5 plastic dust bags.
Milwaukee® 49-90-1951 HEPA Dry Filter Kit, 4 in L x 3-1/8 in W x 3 in H, For Use With M18™ 0882-20 Compact Vacuum, Black/White
Milwaukee HEPA dry filter kit (2 pack) works on the M18 compact vacuum (0882-20).
Milwaukee® 49-90-1900 Wet Dry HEPA Filter Kit, For Use With 0780-20 and 0880-20 Wet/Dry Vacuum Cleaner, Fabric/Metal, Silver
The MILWAUKEE® HEPA Filter works on the M18™ 2 Gallon Wet/Dry Vacuum (0880-20), M12 FUEL™ 1.6 Gallon Wet/Dry Vacuum (0960-20), and the M18 FUEL™ PACKOUT Wet/Dry Vacuum (0970-20). This high-efficiency HEPA filter is excellent for fine dust suction. This certified HEPA Filter captures 99.97% of all particles greater than 0.3 microns and is easy to install and remove with its twist and lock feature.
Recently Viewed
36505 RIDGID Model 12-R, 1/8" - 2" NPT Exposed Ratchet Pipe Threader Set
Description
del 12-R, 1/8" - 2" NPT Exposed Ratchet Pipe Threader Set
Set Includes:
(1) Set of Die Heads, 1/8" to 2" NPT
(1) Set of Alloy Dies
(1) Ratchet Assembly
(1) Ratchet Handle
(1) Carrying Case
BBI 202082 Button Socket Cap Screw, 5/16-18, 1/2 in OAL, Stainless Steel, A2 (18-8) Grade
BBI 202082 Button Socket Cap Screw, 5/16-18, 1/2 in OAL, Stainless Steel, A2 (18-8) Grade
PALMSCOPE 9-MM INSPECTION CAMERA - GNLDCS950>
#120-2 RIVETED ROLLER CHAIN (FT)-REN1202R >
Description
2" NPT 12-R Alloy RH Manual Threader Pipe Die
BBI 212029 Flat Socket Cap Screw, #8-32, 1/2 in OAL, Stainless Steel, A2 (18-8) Grade
BBI 212029 Flat Socket Cap Screw, #8-32, 1/2 in OAL, Stainless Steel, A2 (18-8) Grade
