Milwaukee Tool
Milwaukee 1/2" CRIMP END BRUSH MWK 48-52-1000
1/2" X .014" X 1/4"-SHANK CRIMPED WIRE END BRUSH - MWK48521000 >
Milwaukee 1/2" CHUCK--USE "MWK" 42-66-0755
1/2" DRILL METAL CHUCKS-MWK48661575 >
Milwaukee 1/2" CHUCK & KEY FOR 5378-20 & 21 MWK 48-66-5185
1/2" CHUCK & KEY FOR 5378-20 & 21-MWK48665185 >
Milwaukee 1/2" 120-VOLT ELECTRIC DRILL MWK 1007-1
The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. The QUIK-LOK™ cord detaches easily for storage or service replacement. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.
Milwaukee 1/2" 120-V REVERSING DRILLS MWK 1250-1
The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job, especially with small-bit applications. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.
Milwaukee 1/2" 120-V REVERSING DRILLS MWK 1101-1
If more power is what you need, then look no further than the Milwaukee D-handle line of drills. With 7 amp motors and heat treated metal gears, these are truly the choice of the professional. The 1101-1 features 500 RPM and can be used with our right angle drive attachment to increase versatility.
Milwaukee 1/2" 120-V REVERSING DRILLS MWK 1001-1
The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.
Milwaukee 1/2" 120-V HAMMERDRILLS MWK 5378-21
The power to drill 1/2 in. holes in concrete. The versatility to excel at wood and steel applications. This powerful 7.5 amp, 1/2 in. hammer drill features dual trigger speed control in two ranges, with more power for the toughest applications or more speed and less torque for lighter applications. Use it for drilling in wood with flat boring bits, hole saws, auger bits and Selfeed bits, or in steel with twist bits and in concrete with percussion bits. The removable side handle helps set the depth rod for pre-set hole drilling. The heavy-duty metal gear case withstands daily jobsite use, yet the drill's lightweight, balanced pistol-grip design reduces fatigue during a long work day. The kit includes a durable carrying case.
Milwaukee 1/2" 120-V HAMMERDRILL KITS MWK 5387-22
The adaptable 1/2 in dual-speed hammer drill features an 8.5 A motor that provides overload protection, even when drilling 3/4 in holes in concrete. Choose controls in two ranges: 0 to 1000 rpm/0 to 16000 bpm or 0 to 2500 rpm/0 to 40000 rpm. It's versatile enough to drill in wood with flat boring bits, hole saws, auger bits and selfeed bits - or drill in steel with twist bits and in concrete with percussion bits. The removable side-handle helps you set the depth rod for preset hold drilling. The heavy duty metal gear case withstands daily jobsite use, yet the drill's lightweight balanced pistol-grip design reduces fatigue during a long work day. The 10-foot, QUIK-LOK™ cord and keyed chuck ensure hours of reliable, uninterrupted performance.
Milwaukee 1/2" 120-V D-HANDLED DRILLS MWK 1107-6
The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. The QUIK-LOK™ cord detaches easily for storage or service replacement. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.
Milwaukee 1"X25-FT INCH TAPE MEASURES MWK 48-22-5525
Milwaukee® tape measures are nothing but heavy duty. Using nylon blade protection and a 5-point reinforced frame, they offer up to 10X longer life. Additional innovative features include a wider base which allows for greater stability during layout and an optimized hook that is designed for scoring applications like drywall.
Milwaukee 1"-WIDTH X 12" SDS-MAX COLD CHISEL MWK 48-62-4079
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Excellent for general chipping and breaking applications. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee 1"-WIDE 3/4"-HEX X 20" FLAT CHISEL MWK 48-62-3015
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee 1"-WIDE 3/4"-HEX X 12" FLAT CHISEL MWK 48-62-3010
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee 1" X 36" 4-C SPLINE ROTOHAMMER BIT MWK 48-20-4380
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee 1" X 35' MAGNETIC-TIP TAPE MEASURE MWK 48-22-0335
The MILWAUKEE® 35ft Compact Magnetic Tape Measures have up to 15' of reach* and a magnet that easily attaches to EMT & steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6 in of the blade, reducing tape tear. The compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
Milwaukee 1" X 25' MAGNETIC-TIP TAPE MEASURE MWK 48-22-0325
The MILWAUKEE® 25ft Compact Magnetic Tape Measures have up to 15' of reach* and a magnet that easily attaches to EMT & steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6” of the blade, reducing tape tear. The compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
Milwaukee 1" X 22" SPLINE ROTOHAMMER BITS MWK 48-20-4101
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee 1" X 22" 4-CUT SPLINE R/HAMMER BIT MWK 48-20-4375
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee 1" X 18"-LENGTH FLAT CHISELS MWK 48-62-2030
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee 1" X 16" SPLINE ROTOHAMMER BITS MWK 48-20-4100
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee 1" X 16" 4-CUT SPLINE R/HAMMER BIT MWK 48-20-4370
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee 1" X 12"-LENGTH COLD CHISELS MWK 48-62-2020
Milwaukee Tool has a full line of demolition steel accessories with a variety of shanks (SDS Plus, SDS Max, spline or round Hex, 3/4 Hex, and 1-1/8 collared Hex with notch). The Milwaukee 48-62-2020 is a 1 in. x 12 in. Spline round Hex demo flat chisel. This demolition steel hammer accessory is ideally used with Milwaukee 2 in. Spline drive rotary hammer 5340 - 21. made from forged high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete.
Milwaukee 1" LOCKING TUBING CUTTERS MWK 48-22-4202
The Milwaukee® tubing cutter cuts upto 1 in rubber and plastic tubing and PEX-a tubing. It features a replaceable V-shaped, double ground steel blade for clean perpendicular cuts and maximum tool life. The 1-handed locking mechanism is designed for an easy to use lock for improved tool safety. Backed by Milwaukee® Limited Lifetime Warranty the tubing cutter was built with an all metal core that provides longer tool life to the professional user.
Recently Viewed
SERIES 1350/37 U-JOINT - GGM20053>
Milwaukee® M12™ 48-20-7487 2-Cutter Rotary Hammer Drill Bit, 9/16 in Drill Bit, 25/64 in SDS-Plus Shank, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Fluke® FLUKE-177-ESFP Digital Multimeter, 1000 VDC/VAC, 10 A, 50 MOhm Measuring, 1000 V AC/DC, 10 A, 50 MOhm, Digital Display
Fluke® 177 digital multi-meter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments, the Fluke® 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems. The Fluke® 177 digital multi-meter gives you True-RMS™ voltage and current measurements, 6000 count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke® 177 provides higher 0.09 basic accuracy, a digital display with analog bar graph and backlight.
Proto® JSF15T Surface Protective Hammer Tip, 1-1/2 in Plastic Tip, Tough, Green
Milwaukee® M12™ 48-20-7441 2-Cutter Rotary Hammer Drill Bit, 5/16 in Drill Bit, 25/64 in SDS-Plus Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Milwaukee® M18™ 2607-20 Cordless Hammer Drill/Driver, 1/2 in Metal Single Sleeve Ratcheting Lock Chuck, 18 V DC, 400/1800 rpm No-Load, Li-Ion Battery
The most compact hammer drill driver in its class is more powerful than the competition. Built with a Milwaukee® 4-pole frameless motor, the M18™ compact 1/2 in. drill driver delivers 500 in-lbs of torque and up to 1,800 RPM. At only 7-1/4 in. length, this drill driver allows you access to the tightest work spaces. An all-metal gear case and 1/2 in. metal chuck provide maximum durability, even on the most challenging work sites.
