Milwaukee Tool
1/2" X .014" X 1/4"-SHANK CRIMPED WIRE END BRUSH - MWK48521000 >
1/2" DRILL METAL CHUCKS-MWK48661575 >
1/2" CHUCK & KEY FOR 5378-20 & 21-MWK48665185 >
The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. The QUIK-LOK™ cord detaches easily for storage or service replacement. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.
The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job, especially with small-bit applications. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.
If more power is what you need, then look no further than the Milwaukee D-handle line of drills. With 7 amp motors and heat treated metal gears, these are truly the choice of the professional. The 1101-1 features 500 RPM and can be used with our right angle drive attachment to increase versatility.
The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.
The power to drill 1/2 in. holes in concrete. The versatility to excel at wood and steel applications. This powerful 7.5 amp, 1/2 in. hammer drill features dual trigger speed control in two ranges, with more power for the toughest applications or more speed and less torque for lighter applications. Use it for drilling in wood with flat boring bits, hole saws, auger bits and Selfeed bits, or in steel with twist bits and in concrete with percussion bits. The removable side handle helps set the depth rod for pre-set hole drilling. The heavy-duty metal gear case withstands daily jobsite use, yet the drill's lightweight, balanced pistol-grip design reduces fatigue during a long work day. The kit includes a durable carrying case.
The adaptable 1/2 in dual-speed hammer drill features an 8.5 A motor that provides overload protection, even when drilling 3/4 in holes in concrete. Choose controls in two ranges: 0 to 1000 rpm/0 to 16000 bpm or 0 to 2500 rpm/0 to 40000 rpm. It's versatile enough to drill in wood with flat boring bits, hole saws, auger bits and selfeed bits - or drill in steel with twist bits and in concrete with percussion bits. The removable side-handle helps you set the depth rod for preset hold drilling. The heavy duty metal gear case withstands daily jobsite use, yet the drill's lightweight balanced pistol-grip design reduces fatigue during a long work day. The 10-foot, QUIK-LOK™ cord and keyed chuck ensure hours of reliable, uninterrupted performance.
The professional's choice for superior jobsite performance. With a powerful Milwaukee® built motor, trigger speed control and reverse, the 1/2 in D-handle drill helps you reach maximum productivity on the job. Helical cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The durable glass-reinforced nylon D-handle and side-handle assist with a secure grip and extra control. The QUIK-LOK™ cord detaches easily for storage or service replacement. Use this 1/2 in D-handle drill with our right angle drive attachment for increased versatility.
Milwaukee® tape measures are nothing but heavy duty. Using nylon blade protection and a 5-point reinforced frame, they offer up to 10X longer life. Additional innovative features include a wider base which allows for greater stability during layout and an optimized hook that is designed for scoring applications like drywall.
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Excellent for general chipping and breaking applications. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
The MILWAUKEE® 35ft Compact Magnetic Tape Measures have up to 15' of reach* and a magnet that easily attaches to EMT & steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6 in of the blade, reducing tape tear. The compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
The MILWAUKEE® 25ft Compact Magnetic Tape Measures have up to 15' of reach* and a magnet that easily attaches to EMT & steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6” of the blade, reducing tape tear. The compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee Tool has a full line of demolition steel accessories with a variety of shanks (SDS Plus, SDS Max, spline or round Hex, 3/4 Hex, and 1-1/8 collared Hex with notch). The Milwaukee 48-62-2020 is a 1 in. x 12 in. Spline round Hex demo flat chisel. This demolition steel hammer accessory is ideally used with Milwaukee 2 in. Spline drive rotary hammer 5340 - 21. made from forged high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete.
The Milwaukee® tubing cutter cuts upto 1 in rubber and plastic tubing and PEX-a tubing. It features a replaceable V-shaped, double ground steel blade for clean perpendicular cuts and maximum tool life. The 1-handed locking mechanism is designed for an easy to use lock for improved tool safety. Backed by Milwaukee® Limited Lifetime Warranty the tubing cutter was built with an all metal core that provides longer tool life to the professional user.
Recently Viewed
Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.
2" POCKET SCREWDRIVER W/CLIPS-CRE5432V >
Milwaukee® 2217-20 Digital Multimeter, 600 V AC/DC, 10 A, 40 MOhm Measuring, 6 mV to 600 VAC, 600 mV to 600 VDC, 10 A, 600 Ohm to 40 MOhm, High Contrast White on Black Display
The MILWAUKEE® Digital Multimeter w/ Lo-Z is designed for professional, residential, and commercial electricians. Made with a high-contrast, white-on-black display, this meter provides the clearest readings. Equipped with TRMS and Lo-Z, the Digital Multimeter provides accurate measurements for the professional electrician. The meter is rated to CATIII 600V and meets UL safety specifications required by electrical users. This Milwaukee® meter is covered by our 5-Year Warranty.
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Drive Type: 12-point double box-end. Fastener Sizes: Dual configuration featuring 3/8-inch on one side and 7/16-inch on the other. Design: Offset handle geometry, optimized for clearing obstructions and protecting your knuckles during high-torque applications. Material: Premium Armaloy steel alloy, highly regarded by mechanics for its exceptional strength-to-weight ratio and resilience. Manufacturing Origin: Proudly made in the USA.
JITTERBUG PNEUMATIC/AIR SANDER-JETJSG0416 >
