Milwaukee Tool
Milwaukee 20-AMP CORE DRILL MOTORS MWK 4004-20
Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 A model features 4.8 peak horsepower with a 300 rpm or 600 rpm operating speed. The 4004 has a clutch to protect gears and motor against overload. This unit will handle core bits from 4 to 14 in Dia.
Milwaukee 2"-WIDTH-TIP X 12" SDS MAX CHISELS MWK 48-62-4085
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed to clean concrete, scale, rust and cut troughs and some asphalt. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee 2" X 23" SPLINE ROTOHAMMER BITS MWK 48-20-4419
Four cutter Spline bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in four cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 5/8 in. to 1-1/2 in. diameters. 4 cutter style bits are also available in metric (from 16 mm to 38 mm). One per package.
Milwaukee 2" X 12"-LENGTH SCALING CHISELS MWK 48-62-3030
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for removing weld spatter, scale and concrete form overflow and seepage. One per package.
Milwaukee 2" X 12"-LENGTH SCALING CHISELS MWK 48-62-2050
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Scaling chisels are ideal of cleaning concrete and removing scale and rust. Additionally, scaling chisels can be used for cutting troughs and some asphalt. The widened tip design allows for faster surface material removal. This chisel is specifically designed for spline rotary hammers and should be used in hammer only mode.
Milwaukee 2" SELF-FEED BITS MWK 48-25-2001
Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.
Milwaukee 2" DIA CONCRETE CORE BITS MWK 48-16-2014
2" DIAMOND CONCRETE CORE BITS-MWK48162014 >
Milwaukee 2" DIA CONCRETE CORE BITS MWK 48-16-2013
2" DIAMOND CONCRETE CORE BITS-MWK48162013 >
Milwaukee 2.4-VOLT 2-SPEED C/L SCREWDRIVERS MWK 6546-6
2.4-VOLT 2-SP CORDLESS SCREWDRIVER-MWK65466 >
Milwaukee 2.4-V CL S/DRVR--USE "MWK" 2101-22
2.4-VOLT CORDLESS SCREWDRIVER KIT WITH 2" BATTERIES-MWK654722 >
Milwaukee 2.4-V C/LESS TOOL BATTERYS MWK 48-11-0100
This hard working 2.4 Volt Nickel-Cadmium battery powers Milwaukee® cordless screwdrivers and caulking guns. More power in a compact design. Works with the 48-59-0300, 120 V 1-hr charger or the 48-59-0181 12 Volt vehicle charger. 1.3 A hour battery no memory effect full battery capacity is always available Ni-cad battery for use with Milwaukee® 2.4 V cordless tools.
Milwaukee 2-PC VAC/CLEANER FLOOR WANDS MWK 49-90-1865
This 2-piece chrome plated steel floor wand accepts 14 in major floor tool 49-90-1840 using a spring loaded snap lock. This wand fits 1-1/2 in ID hoses.
Milwaukee 2-PC OFFSET SNIP SETS MWK 48-22-4523
Milwaukee® Aviation snips are built for long life and durability. Forged blades deliver up to 10X more cuts than cast blades. Bolt lock ensures the blades won't loosen and chrome plating provides rust protection. The flush pivot bolt won't hang up on material for easy use. The metal lock secures the tool for storage and is easily operated with one hand. The offset models features a 45 degree offset handle for clearance over the cut material. The 2 pc. set includes left offset and right offset aviation snips.
Milwaukee 2-9/16" SELF-FEED BITS MWK 48-25-2561
Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.
Milwaukee 2-5/8" THREAD TUN/HAMMER BIT MWK 48-20-5087
2-5/8" THREADED TUNNEL HAMMER BIT - MWK48205087>
Milwaukee 2-5/8" CARBIDE-TIP S/METAL CUTTERS MWK 49-57-8341
For materials up to 3/16 in., these Carbide tipped sheet metal hole saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the Carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/4 in. diameter.
Milwaukee 2-3/4" DIA CONCRETE CORE BIT MWK 48-16-2756
2-3/4" DIAMOND CONCRETE CORE BIT - MWK48162756>
Milwaukee 2-1/8" SELF-FEED BITS MWK 48-25-2121
Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.
Milwaukee 2-1/4" SELF-FEED BITS MWK 48-25-2251
Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.
Milwaukee 2-1/2" WIRE BRUSHES MWK 48-52-1050
2-1/2" X .020 X 1/4"-SHANK FLARED END WIRE BRUSH - MWK48521050 >
Milwaukee 2-1/2" PROPEX EXPANSION HEADS MWK 49-16-2616
The 2 in., 2-1/2 in., and 3 in. ProPEX® expansion heads are precision engineered to evenly expand Uponor® large diameter PEX pipe for ProPEX® fittings. These heads are compatible with the M18™ Force Logic™ 2 in. to 3 in. ProPEX® expansion tool and auto-rotate. Each head is both black oxide coated for durability and weather resistance, and has color coded rings and large size ID markings for easy selection.
Milwaukee 2-1/2" DIA CONCRETE CORE BIT MWK 48-16-2513
2-1/2" DIAMOND CONCRETE CORE BITS-MWK48162513>
Milwaukee 2-1/2" CTS PRESS RINGS MWK 49-16-2656
M18™ Force Logic™ press rings provide a solution that takes the advantage of press vs. sweat to the max. Pressing 2-1/2 in. to 4 in. pipes using a unique to Milwaukee® 2 - hinge design provides quality connections in close quarters. M18™ press rings deliver quality press connections on Viega® ProPress™ systems, Elkhart® APOLLOXPRESS™, and Grinnel® G-Press copper systems large diameter copper systems.
Milwaukee 18V TOWER LIGHT--USE "MWK" 2131-20
The brighter, tougher, taller stand light - M18™ ROCKET™ led Tower light is designed to give professionals an area lighting solution that adapts, performs and survives industrial use unlike any other portable work light. The 2130-20 can be setup in seconds with its max extension 7 ft high and it collapses down to 40 in for easy transport and storage. The light head can be extended from 4 to 7 ft light overhead work or minimize shadows when casting light downward. Capable of filling large areas with light, it provides 2000 Lumens of high definition light output for in its high mode, 1300 in medium and 850 in low and it can run for up to 4, 6 or 10 hr with an M18™ REDLITHIUM™ XC5.0 battery pack. It uses high quality LEDs with a neutral white color and a high color rendering index paired with a Milwaukee® designed reflector to produce an even beam pattern. Its reinforced legs are impact resistant and its low center of gravity provides a stable base. The light head is protected by an impact resistant lens and bezel and it nests into a protective shroud for secure transport and storage. Its LEDs never need to be replaced and are backed by a limited lifetime warranty. The combination of these technologies offers professionals the highest quality led lighting solution, on or off the jobsite.
Recently Viewed
Used exclusively for electrical purposes, such as power generation, electrical contractors, hybrid automotive repair or service, hybrid automobile manufacturing, industrial plant maintenance, utilities.
The MILWAUKEE® M18 FUEL™ 1-9/16" SDS Max Rotary Hammer is the first to offer an 18V SDS Max cordless solution. By utilizing proprietary M18 FUEL™ technology, the 1-9/16" SDS Max rotary hammer can drill as fast as corded SDS Max rotary hammers, deliver corded durability, and provide over 20 minutes of continuous chipping. The POWERSTATE™ Brushless Motor delivers 5 ft-lbs of impact energy for the more demanding, heavy-duty applications, including dry coring and medium-duty chipping in both concrete block and reinforced concrete. Powered by the M18™ REDLITHIUM™ FORGE™ XC8.0 battery pack, which delivers up to 5X more run-time, 35% more power, and runs 60% cooler than standard lithium-ion batteries, the 1-9/16" SDS Max Rotary Hammer delivers over 20 minutes of continuous chipping. It also includes REDLINK PLUS™ Intelligence, the most advanced electronic system on the market, to prevent damage to the tool and battery from overloading and overheating. The M18 FUEL™ 1-9/16" SDS Max Rotary Hammer is part of the MILWAUKEE® complete cordless rotary hammer line-up, ranging from Compact SDS Plus to SDS Max, all powered by the M18™ REDLITHIUM™ battery system.
Klein® Cushion-Grip® 630-5/8 Nutdriver, 5/8 in, Hollow Shank, Black/Yellow Cushion Grip Handle, ANSI/ASME Specified, Polished Chrome
Klein® has the nut drivers professionals demand to get the job done. The full hollow shaft facilitates work on stacked circuit boards or other long bolt applications. Premium chrome plated for smooth feel and corrosion resistance. The handle end is color coded for easy identification. The patented Tip-Ident® quickly identifies nut driver and size.
5-40" X 1/2" Round Head Slot Machine Screws
10-32" SAE Machine Screw Nuts
5-40" X 5/8" Round Head Slot Machine Screws
