Milton Industries

1/4 in FNPT single head air Chuck has a closed type sealing and is for use on an airline. This is not for use with an inflator gauge. Maximum pressure of 150 psi.

1/4 in FNPT single head air Chuck with grip Chuck locks onto valve core thread. Sealing type Chuck is closed or sealing and is for use on an airline. Not for use with an inflator gauge. Milton® air Chucks are designed and manufactured to exacting standards. Maximum pressure of 150 psi. These are not for use with an inflator/pressure gauge.

These 1/4 in FNPT straight head air Chucks are designed and manufactured to exacting standards. These closed or sealing type Chucks offer a maximum air pressure of 150 psi. These are not for use with an inflator/pressure gauge.

1/8 in MNPT Tank Valves are designed for use in filling vessels with air. Standard valve core with plastic cap measures at 1 in OAL. Maximum pressure of 200 psi. Cap thread size of 0.305 to 32.

5/16 in brass hose mender fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Both ends have hose barbs.

Milton® is well known for inflator gauges. This inflator gauge is made with heavy duty construction which provides long life even under extreme use and conditions. Its single head air chuck comes with a chuck clip to quickly attach. Milton® inflator gauges come with both a magnifying window lens and a full swivel chuck. Has a pressure range of 10 to 160 psi in 2 lb increments. 1/4 in NPT air inlet.

Milton® is well known for inflator gauges. This dual head straight Chuck Inflator Gauge is made with heavy duty construction, providing for long life even under extreme use and conditions. Perfect for high pressure applications, this inflator gauge offers a pressure range of 10 to 160 psi. The dual heads allow for easy access into inner duals. Equipped with a magnified viewing window, this tire inflator gauge has a full swivel chuck and deflator valve. Gauge and valve cartridges are both replaceable. 1/4 in NPT air inlet. Meets OSHA regulation 1910.17.

1-1/2 in plastic tire Valve Extension extends through hole in wheel cover for ease in inflating or checking tire pressure. Valve Extension is lightweight so it will not affect wheel balance.

4-in-1 Valve Repair Tool can be used for rethreading inside and outside of valve stems, insertion or removal of valve cores. Allows removal of valve cores even if shoulders are broken. This steel plated Valve Repair Tool has a tap size of 0.2108-36.

Valve Core Tool is for the removal and insertion of valve cores. One end for is for a standard bore, while one end is for large bore valves. With an overall length of 5 in, this Valve Core Tool has a 3 in handle length.

Nickel plated brass Valve Caps with long skirt are heavy knurled dome caps. These are high heat-resistant sealing washers.

This 1/4 in FNPT filler faucet provides easy operation and smooth flow, providing a long spout and lever control. These filler faucets are heavy duty, ruggedly built with stainless steel springs. Made up of a zinc alloy body and a 4 in nitrile rubber filler spout, this faucet offers 30 to 35 psi.

1/4 in MNPT G-style Plugs are made of case hardened steel and are plated to resist rust. G-style Plugs offer a basic flow size of 1/2 in and a maximum pressure of 300 psi. With air flow of up to 99 scfm, G-style Plugs are perfect for applications that require more than 60 scfm.

1/4 in FNPT H-style Plugs are made of case hardened steel and plated to resist rust. H-style Plugs offer a basic flow size of 3/8 in and maximum pressure of 300 psi. Air flow of 67 scfm is perfect for all of your larger tool applications requiring more scfm.

3/8 in FNPT H-style Plugs are made of case hardened steel and are plated to resist rust. Milton® H-style Plugs have a 3/8 in basic flow size and a maximum pressure of 300 psi. With air flow of up to 67 scfm, H-style couplers and Plugs are perfect for larger tool applications that require more scfm.

3/8 in MNPT H-style Plugs are made of case hardened steel and plated to resist rust. H-style Plugs have a basic air flow size of 3/8 in and a maximum inlet pressure of 300 psi. These Plugs are perfect for larger tool applications requiring more scfm.

3/8 in MNPT H-style Couplers are used in larger tool applications requiring more scfm's. 300 psi maximum. Complete with Buna-N Seal.

Milton® 1835 H Style Coupler With Buna-N Seal, 3/8 in, FNPT, Steel, Domestic

1/4 in MNPT H-style Couplers are used in larger tool applications requiring more scfm's. With their basic flow size of 3/8 in, H-style Couplers offer up to 300 psi. H-style Couplers are made of steel and are plated to resist rust. Complete with Buna-N seal.

Milton® 1833 H Style Coupler With Buna-N Seal, 1/4 in, FNPT, Steel, Domestic

3/8 in MNPT G-style Plugs are made of case hardened steel and are plated to resist rust. G-style couplers and Plugs have a 1/2 in basic flow size and a maximum of 300 psi. Offering air flow of up to 99 scfm, Milton® G-style couplers and Plugs are perfect for applications that require over 60 scfm.

Milton® 1818 G Style Plug, 1/2 in, FNPT, Hardened Steel, Domestic

Milton® 1817 G Style Plug, 1/2 in, MNPT, Hardened Steel, Domestic

3/8 in FNPT P-style Plugs are made of case hardened steel and plated to resist rust. Bodies have 8 locking balls for better retention of Plug. Has a maximum inlet pressure of 300 psi.