Klein Tools

LIGHTWEIGHT LOCKBACK KNIFE FEATURES A 2-1/4" LONG CHROME DROP-POINT BLADE THAT IS AUS 8" STAINLESS STEEL HARDENED TO 58-59 RC.

2-3/8" NYLON HANDLE POCKET KNIFE-KLE44002 >

Compact, easy to use set.
Form-fitting storage box to keep set organized.

Get to those deeply recessed nuts and bolts with Klein® hollow shank nut driver. The full hollow 6 in shaft fits over extra long bolts and studs for most applications including stacked circuit boards. The comfortable Cushion-Grip allows for greater torque and enables tool to be used for hours without fatigue.

REPLACEMENT POUCH WITH BIT HOLDER-KLE1016RP >

Has 32 teeth/inch for quick starts, along with 24 teeth/inch and 18 teeth/inch for fast and smooth conventional cutting
Special high-speed steel teeth fused to carbon-steel provide superior cutting action and long life
Reclosable heavy-vinyl, seal-tight pouch of ten blades
Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product
Weight: 8 ounces/pack

The Klein-Kurve Dual NM Cable Stripper/Cutter allows you to cleanly remove the outer jacket of 12/2 and 14/2 Type NM-B non-metallic sheathed cable. Stripping holes easily remove the insulation on 12 and 14 AWG solid wire. Precision shear-type blades provide square clean cuts on solid copper wire. Curved handles with double-dipped grips makes this stripper/cutter comfortable to use every day.

12/2 and 14/2 stripping slots quickly remove outer jacket of Type NM-B non-metallic sheathed cable
Stripping holes easily remove insulation on 12 and 14 AWG lead wire
New lock design prevents accidental locking and loosening over time
Precision shear-type blades for square, clean cuts on solid copper wire
Narrow, strong-gripping, serrated nose for easy bending, shaping and pulling of wire in tight places
Holes for screw-shearing, wire looping and bending
Coil spring provides fast self-opening action

Curved sheepfoot skinning blade - 2-3/8'' (60 mm) long.
Special insulation-slitting blade - 1-1/2'' (38 mm) long.
Slitting blade locks open.

Standard spearpoint blade 2-1/2-Inch (64 mm) long
Screwdriver-tip blade 2-1/2-Inch (64 mm) long
Screwdriver-tip blade locks open
Multi-purpose tool for everyday convenience
Handle is plastic with faux wood grain
Only 3.75-Inches (95.3 mm) closed
Blade is constructed of high quality stainless steel

Large, stainless-steel, hawkbill slitting blade 2-3/4-Inch (7 cm) long
Ideal for heavy-duty line work
Plastic handle
Blade locks open

Coping-type blade 2-1/4'' (57 mm) long.
Compact and lightweight.
Ideal for skinning small wire and cable.

3-BLADE POCKET KNIFE, CARBON STEEL SPEARPOINT, INSULATION-SLITTING, AND SCREWDRIVER TIP BLADES

No contact between stainless steel ring and hardened steel blade; blade and ring are securely molded in handle
Three-inch steel blade withstands frequent scoring and slitting of cable jacket
Notch on blade back for scraping or removing wire insulation
Comfortable textured handle with finger grooves and guard
Made in USA
Leather sheath available, Cat. No. 5163

Designed for use when light, compact grip is desired and where conductor damage is not a factor
Works with Messenger and Guy Strand cable diameter range of 0.125 to 0.500-Inch (3.18 to 12.70 mm)
Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
Maximum safe load of 5000-Pound (2268 kg)
Made in USA
Individually hand inspected and actuated for proper function
Rigorously tested and pulled to rated load to ensure the highest quality and reliability

Used for Aircraft, EHS, Messenger, Guy Strand cables
Designed for 0.50 to 0.75-Inch (12.7 to 19.05 mm) diameter cable sizes with max safe load of 15,000-Pound (6803 kg)
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
For larger conductors, see our grips with round inside-jaw contour
Made in USA
Locking handle keeps jaw open while grip is placed on cable with a hot stick

2" COPPER ALLIGATOR CLIPS

1-3/32" STEEL MINI-GATOR CLIPS

Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)

Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)

BLOCK WITH OUT ROPES OR HOOKS

Similar to standard lineman's wrench, but with end openings sized to NEMA hardware specifications
Silver painted finish
Large end has 1-1/16-Inch and 1-3/16-Inch openings
Small end has 11/16-Inch and 7/8-Inch openings
Made in the USA

Forged in the USA from select US alloy steel to withstand high-leverage and heavy loads
Extra heavy-duty head area gives maximum strength and durability
Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding
Extra-large hub area works on larger diameter holes better than other wrenches
Catalog number, bolt size and nominal opening size are stamped on every wrench for easy identification
American Bridge design

Forged in the USA from select US alloy steel to withstand high-leverage and heavy loads
Extra heavy-duty head area gives maximum strength and durability
Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding
Extra-large hub area works on larger diameter holes than other wrenches
Catalog number, bolt size and nominal opening size are stamped on every wrench for easy identification
American Bridge design

Multi-bit screwdriver with interchangeable, versatile snap-in blades
Tool supplied with four different tips on two reversible blades
Made of quality steel
7-Inch length
Made in USA