Klein Tools
KLEIN TOOLS 44001 Lightweight Lockback Knife Features A 2-1/2" Long Chrome Drop-point Blade That Is Aus 8" Stainless Steel Hardened To 58-59 Rc.
LIGHTWEIGHT LOCKBACK KNIFE FEATURES A 2-1/2" LONG CHROME DROP-POINT BLADE THAT IS AUS 8" STAINLESS STEEL HARDENED TO 58-59 RC
KLEIN TOOLS 44004 Lightweight Lockback Knife 2-1/2-Inch Sheepfoot Blade, Black Handle
Blade is AUS8 stainless
Premium quality blade offers superior edge holding
Impact-resistant nylon resin handle with rubber insert
Reversible thumb stud provides easy one-handed opening
Lockback secures blade open
Compact design for easy carrying
Lanyard hole for tethering
KLEIN TOOLS 5003-18 18" Tool Bag, Canvas with Leather Bottom, 11 Pockets, 18-Inch
Tool bag with steel frame mouth with hinge for rugged use
Organize tools using internal pockets in a variety of sizes
External pocket for additional carrying needs
Constructed of strong No. 8 natural canvas
Wide opening provides easy access to large tools
Bottom is protected from the elements by 6 studs
Includes shoulder strap mounts, external pocket, leather bottom and 3-Inch (76 mm) of sides covered with black leather, 2-Inch (51 mm) wide web handles, leather handle wrap, and external tool loop handle in the webbing
KLEIN TOOLS 50211 Speedway Flat-Steel Fish Tape Cable Puller 120 Feet
120' FISHTAPE WITH REEL
KLEIN TOOLS 50221 SPEEDWAY 240 FLAT STEEL FISH TAPE 240 FOOT X 1/8
HEAVY DUTY FLAT-STEEL FISH TAPE W/ REEL 240'
Makes clean, burr-free cuts through PVC.
High-leverage ratchet-action for maximum cutting power.
Easy one-hand cutting.
Special heat-treated blades stay sharp longer and reduces pipe deformation.
Hooked jaw holds pipe in proper cutting position.
1-QT LUBRICANT-KLE51000 >
Heavy-duty No. 8 natural canvas tool bag
Rivet-reinforced for durability
Steel-frame mouth with hinge for rugged use
Stitched and riveted leather handles for comfort and strength
Two retaining straps with buckles provide secure closure
Moisture resistant vinyl bottom with non-scratch feet to protect against wear
Retro-fit bags with shoulder strap kit (Cat. No. 5102S). Kit includes leather strap with pad and snap hooks, rings and fasteners for attaching rings to bags
Durable black leather pouch designed for electricians, service techs, and maintenance workers
Five large utility pockets and three screwdriver and plier pockets for easy organization
Tape rule holder on the front for added convenience
Fits most belts up to 2.5 inches wide for easy transport
Riveted and stitched for extra durability, ensuring long-lasting use
Includes a knife snap and heavy-duty chain tape thong for secure tool fastening
Made with soft, pliable, moisture-resistant black leather and features a tunnel loop belt connection for added stability
Made in the USA
Ten separate compartments with places for a wide variety of pliers, screwdrivers and other tools
Stitched and riveted leather construction for long life
Includes ring and slotted-leather tape thong
Slotted to fit belts up to 1-3/4-Inches (44 mm) wide
Strong, heavy-duty leather
Equipped with a double-tongue buckle
Embossed with a basket-weave pattern for added style
Fits waist sizes 36-Inch to 44-Inch>
Holds all hammers except lineman's style
Stitched and riveted leather construction for long life
Heavy-metal hammer loop riveted to panel
Tunnel loop fits belts up to 4-Inches (102 mm) wide
Assembled in USA of U.S. and imported components
Klein Tools 5715S Cordura® Fabric Metal Belt Clip Small Mobile Phone Holder 4-1/2-Inch x 2-5/8-Inch Black PowerLine
Klein Tools 5715S Cordura® Fabric Metal Belt Clip Small Mobile Phone Holder 4-1/2-Inch x 2-5/8-Inch Black PowerLine.
You can give yourself quick and easy, on-the-job access to your cellular phone with the Klein Tools Powerline Small Mobile Phone Holder. This durable pouch is double layered and is made from 1000-denier Cordura nylon. It features a metal clip that fits most belts up to 2-Inch wide, and a closable touch fastener strap.
2-3/8" STEEL ALLIGATOR CLIPS (EA)
Two layers of insulation provide protection against electric shock.
Klein insulated tools are individually tested to exceed IEC 60900 and ASTM F1505 standards for insulated tools.
Custom US-made tool steel.
Cushion-Gripâ„¢ handle for superior torque and comfort.
This item has been discontinued and replaced by the 601-7-INS.
Built to handle the tough jobs with ease
Hex bolster reinforces shank for hard use and allows wrench assisted turning
Cushion-Gripâ„¢ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Made in USA
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
KLEIN TOOLS 602-6-INS Screwdriver, Insulated; 5/16 in. Slotted Tip; 10-15/16 in. Long
5/16" X 6" INSULATED SCREWDRIVER
Metal stud offers a convenient and easy way to bend, loop and connect solid wire when installing outlets and switches.
Cushion-Gripâ„¢ handle for greater torque and comfort.
Premium chrome-plated for smooth feel and corrosion resistance.
Internal flanges inside handle provide solid, twist-resistant blade anchor.
Special heat-treated shafts.
Precision-machined tip for exact fit.
Tip-Ident® quickly identifies the screwdriver type and tip orientation.
Meets or exceeds applicable ASME / ANSI specifications.
1000V rated for safety.
Durable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools.
Cushion-Gripâ„¢ handles for greater torque and comfort.
Custom US-made steel.
This has been discontinued and replaced with Cat. No. 633-4-INS.
Precision-machined tip provides accurate fit and torque without slippage
Tip-Ident® quickly identifies the screwdriver type and tip orientation
Cushion-Gripâ„¢ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Made in USA
Special heat-treated shafts
Meets or exceeds applicable ASME / ANSI specifications
Metal stud offers a convenient and easy way to bend, loop and connect solid wire when installing outlets and switches
Bends 10, 12 and 14 AWG wire
Cushion-Gripâ„¢ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Made in USA
Special heat-treated shafts
Precision-machined tip for exact fit
Tip-Ident® quickly identifies the screwdriver type and tip orientation
Meets or exceeds applicable ASME / ANSI specifications
KLEIN TOOLS 607-4 3/32-Inch Cabinet Mini Screwdriver, 4-Inch Round Shank
Precision formed tip provides an exact fit for small screw applications
Cushion-Gripâ„¢ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Made in USA
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
Klein Tools 612-4 Screwdriver, Made in USA, Flat Head Terminal Block Screwdriver, 1/8-Inch Cabinet Tip, 4-Inch Round Shank, TB-DIN
Precision machined tip provides exact fit for terminal block screws
1/8-Inch (3.2 mm) cabinet tip is up to 19-Percent stronger than competitors
Tip provides 76-Percent higher torque value than the required ASME B107 Standard
Cushion-Gripâ„¢ handle offers greater torque comfort
KLEIN TOOLS 620-6 5/16-Inch Cabinet Screwdriver, Coated, 6-Inch Round Shank
Plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping
Thin coating permits use in confined areas
Cushion-Gripâ„¢ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
Recently Viewed
MAGLITE® Mag-Num Star® LMXA301 MAG CHARGER® Water Resistant Replacement Lamp, Xenon Bulb, 643 High Lumens/148 Low Lumens/66 Eco Lumens Lumens
Diablo® DXT1010 Universal Extension, 1/4 in Shank, 6 in L
Greenlee® 435 Measuring Tape, 3000 ft L x 3/16 in W Blade, Waterproof Polyester, Imperial
Greenlee® 435 Measuring Tape, 3000 ft L x 3/16 in W Blade, Waterproof Polyester, Imperial
Milwaukee® M12™ 48-20-7487 2-Cutter Rotary Hammer Drill Bit, 9/16 in Drill Bit, 25/64 in SDS-Plus Shank, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Arrowâ„¢ 378 Round Staple, 1/2 in Leg Length, 3/8 in Crown Width
32" SINGLE BIT AXE HANDLES
