Klein Tools
KLEIN TOOLS 73245 Snap-ring pliers, internal/external, .038" straight
REV SNAP RING PLIER
Sturdy steel construction with corrosion-resistant black-oxide finish.
Heat-treated tips for long-lasting life and secure gripping.
External Retaining-Ring Deluxe style; spring-loaded action.
All of the metric nut drivers with 3-Inch shafts in this 10-piece set fit in the included white enameled metal stand
Nut drivers' identification labels and color coding make individual size selection easy
Smooth Comfordome handles fit the palm of the hand comfortably
Hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Made in USA
Chrome-plated shaft helps prevent corrosion
Internal flanges provide solid, twist-resistant shaft anchor
Meets or exceeds applicable ASME / ANSI specifications
Hack saw blade has three teeth sizes
Hand saw blade converts quickly to 90-Degree or 45-Degree for standard or flush-cut applications
Pivot-lock adjusts blade tension for straighter cuts and longer blade life
Set screw allows for storage of extra blades and secures blade for ''jab'' sawing
Thumb guard for two-hand sawing
KLEIN TOOLS 701-12-TH HACKSAW, HEAVY-WEIGHT, THREADED PINS W/ 12" BLADE
12 INCH BLADE LENGTH; 16 INCH OVERALL LENGTH; 32 FRONT, 24 MIDDLE, 18 END TEETH PER INCH; BLUE FINISH STEEL MATERIAL; DIE CAST ZINC HANDLE; BI-METAL BLADE MATERIAL; KLEIN TOOLS[R] BRAND; WITH THREADED RETAINING PIN
A rugged, heavy-duty saw with the versatility to satisfy professional requirements.
Greater weight means a faster job.
Permits efficient one-hand use where necessary.
Blade cuts fully through to a flat surface.
Converts easily from vertical to horizontal position for full-flush cutting.
Durable, tubular steel frame and die-cast zinc handles with blue finish.
Pivot-action front end with slotted tensioning rod permits maximum tightening of blade for more efficient sawing and longer blade life.
Curved front-end design for comfortable two-hand use.
Storage for extra blades in tubular steel frame.
Supplied with blade; Cat. No. 1200BI Golden Tri-Cut blade.
2-3/8" COPPER ALLIGATOR CLIPS (NON-INSULATED)
Five ratcheting box wrenches packed in a vinyl 8-1/2-Inch x 10-Inch (21.6 x 25.4 cm) H roll-up pouch with individual pockets
Wrenches flip over to reverse ratchet
Set includes five double-hex wrenches with a different size at each end
Both ends are offset 25-degree for more convenient use in confined spaces and on long studs
Made in USA
Laminated construction for greater strength
Reverse ratcheting action by simply turning wrench over
Chrome-plated finish for rust resistance
1000V rated for safety
Two layers of insulation provide protection against electric shock
Klein insulated tools are individually tested to exceed IEC 60900 and ASTM F1505 standards for insulated tools
Cushion-Gripâ„¢ handle for greater torque and comfort
Custom US-made tool steel
This item has been discontinued and replaced with the 662-7-INS
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Exclusive hollow shaft design with Rare Earth magnetic tip features unobstructed pass-through, even on long bolts
Hollow shaft facilitates work on bolt applications
Cushion-Grip handle allows for greater torque and comfort
Handle end is color-coded for easy identification
Internal flanges provide solid, twist-resistant shank anchor
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripâ„¢ handles for greater torque and comfort.
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripâ„¢ handles for greater torque and comfort.
Standard length for most applications, fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Fits over long bolts and studs; internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Meets or exceeds applicable ASME / ANSI specifications
Made in USA
Handle end color coded for easy identification
Cushion-Gripâ„¢ handle for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripâ„¢ handles for greater torque and comfort.
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripâ„¢ handles for greater torque and comfort.
Standard length for most applications; full hollow shaft fits over long bolts and studs
Internal flanges provide solid, twist-resistant shaft anchor
Handle end is also color coded for easy identification
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies nut driver and size
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripâ„¢ handles for greater torque and comfort.
Recently Viewed
PIX BB-72 IS A DOUBLE-SIDED V-BELT, 76.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB72 >
PIX BB-155 IS A DOUBLE SIDED V-BELT, 159.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB155>
CCW JOHN DEERE 21-3/4" MOWER BLADE-HER39200>
4" 18# GREEN CABLE TIES--PK/100-TYTT18RGRN100>
1-LITER BLUE HAND & BODY SHAMPOO-SBS57220 >
12" X 3" X 4" RED SHELF BINS-QSSQSB100R >
