JPW Industries

Wilton® 1010810 Replacement Inner Ring With Dowel Pin, For Use With 400S, 450S, C-1, AW45 and 500S Machinist Bench Vise

Wilton® 10107 Deep Throat Machinist Bench Vise, Serrated Jaw, 10 in Jaw Opening, 6 in W Hardened Steel Jaw, 5-1/2 in D Throat

Proudly made in the USA, the machinist vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the machinist round channel vise nut is anchored at the rear to provide straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly which keeps debris out and lubrication in for a lifetime of smooth operation. The machinist vise is equipped with main jaws and a machined anvil work surface.

Proudly made in the USA, the machinist vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the machinist round channel vise nut is anchored at the rear to provide straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly which keeps debris out and lubrication in for a lifetime of smooth operation. The machinist vise is equipped with main jaws and a machined anvil work surface.

Proudly made in the USA, the machinist vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the machinist round channel vise nut is anchored at the rear to provide straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly which keeps debris out and lubrication in for a lifetime of smooth operation. The machinist vise is equipped with main jaws and a machined anvil work surface.

JET® JT9-N407 14-Piece Replacement Needle, 4 mm, 7 in Needle

JET® JT9-N307 19-Piece Replacement Needle, 3 mm, 7 in Needle

Chrome forged steel chisels designed to fit your JET air hammer. The Replacement Parts JSG-1304, 4-Piece Chisel Set for Air Hammers. This authentic JET replacement part is designed specifically for your tool and guaranteed to perform to OEM specs.

Designed to perform, the JET® 18 in Band Saw delivers more re-saw capacity, greater throat depth and the horsepower you need to tackle bigger boards, create smoother edges and master the intricate cuts. The heavy duty cast-iron fence system is built to give you the sturdiness and support you need for every project and features a micro-adjust dial for exact placement. The table is slotted for front blade removal and the guide post has a stress-free magnetic door on the front for efficient blade changes. Large, independently adjustable guides are tool-less to save you time on set up. The JET® 18 in steel frame Band Saw is engineered to build great projects through superior performance.

JET® Bolt Cutters incorporate high-carbon alloy tool steel jaws for cutting concrete-reinforcing rods, medium tensile and soft bolts, rods, rivets, bars and chains. JET Bolt Cutters all steel handles with rubber grips are angled for maximum leverage. JET Bolt Cutters comply with Federal Specification No. GGG-C-740d Type II

Shed more light on your grinding operation! Flex-neck LED lamp provides inexpensive bright light with low heat output. Trust genuine JET replacement parts when it's time to exchange a component.

The JAT-921 is a very versatile Riveter that is excellent for mild steel up to 3/16" in depth. Built with industrial usage in mind this tool will hand requirements of high production shops.

The JAT-800A lever lock needle scaler brings efficiency to rust, weld slag and paint removal. With its precision needle scattering, you won't just get the job done but get it done faster.

The JAT-730 Random Orbital Palm Sander brings power, comfort, and precision to any sanding job. The hook and loop sanding pad that comes with the tool makes changing abrasives fast and easy.

The JAT-401 1/4'' Die Grinder features a powerful motor and aluminum housing. Built with durability in mind, this tool will withstand the daily grind you need to get your job done.

Durable quality tools that can withstand frequent and rigorous applications, the R6 series can handle 6 hour workdays and get the job done.

Jet® SJ series screw jack is available in five capacities ranging from 5 to 25 tons that hold the load without creeping. The cast bell shaped housing provides stability while the jack design requires less effort to raise the load increasing productivity.

Jet® SJ series screw jack is available in five capacities ranging from 5 to 25 tons that hold the load without creeping. The cast bell shaped housing provides stability while the jack design requires less effort to raise the load increasing productivity.

JET® JLH Series Lever Hoists incorporate safety, durability and heavy duty construction for operation in severe industrial environments. Safety comes standard with features such as slip clutch style overload protection, which prevents the lever hoist from lifting or pulling damaging loads beyond its rated capacity. Our lightweight design, shorter handle and smaller body are ideal for confined areas and low headroom applications. Backed by a lifetime replacement warranty, JET® revolutionary single-piece brake design fuses the three components into the safest brake system in the market. The JET® JLH Series is available in 1/4 to 9 ton capacities, with standard lifts of 5 ft, 10 ft, 15 ft and 20 ft (custom lifts available). Whether it's inverted, vertical, horizontal or any other load angle, the JET® JLH Lever Hoist is the solution for your heavy duty industrial needs.

JET® JLH Series Lever Hoists incorporate safety, durability and heavy duty construction for operation in severe industrial environments. Safety comes standard with features such as slip clutch style overload protection, which prevents the lever hoist from lifting or pulling damaging loads beyond its rated capacity. Our lightweight design, shorter handle and smaller body are ideal for confined areas and low headroom applications. Backed by a lifetime replacement warranty, JET® revolutionary single-piece brake design fuses the three components into the safest brake system in the market. The JET® JLH Series is available in 1/4 to 9 ton capacities, with standard lifts of 5 ft, 10 ft, 15 ft and 20 ft (custom lifts available). Whether it's inverted, vertical, horizontal or any other load angle, the JET® JLH Lever Hoist is the solution for your heavy duty industrial needs.

JET® JLP-A series lever hoists combine safety, reliability, and durability that are designed to perform in light to medium duty industrial applications. The patented brake wear indicator increases safety by letting you know when to replace the friction disks. JET® also offers the option of shipyard hooks, virtually eliminating stretched hooks caused by point or tip loading. The JET® JLP-A lever hoist is available in 0.25 ton to 6 ton capacities with standard lifts of 5 ft, 10 ft, 15 ft and 20 ft. The JET® JLP-A series is the perfect choice for a contractor grade lever hoist.

JET® JLP-A series lever hoists combine safety, reliability and durability that are designed to perform in light to medium duty industrial applications. The patented brake wear indicator increases safety by letting you know when to replace the friction disks. JET® also offers the option of shipyard hooks, virtually eliminating stretched hooks caused by point or tip loading. The JET® JLP-A lever hoist is available in 1/4 to 6 ton capacities with standard lifts of 5, 10, 15 and 20 ft (custom lifts available). The JET® JLP-A series is the perfect choice for a contractor grade lever hoist.

JET PT series heavy duty manual trolleys are available in capacities from 1/2 ton to 10 tons. Built with heavy gauge steel for increased durability, the large steel wheels and thicker bearings provide smear movement on a variety of beams. The built-in bumper guards increase user safety and extend the life of the trolley.