Results 1 - 24 of 431
Grid

ITM UTK0002 Manual Cutter Knive, Utility Blade

ITM TX05040 Bit Screwdriver, #T40 Point, 2 in OAL

ITM TX05030 Bit Screwdriver, #T30 Point, 2 in OAL

ITM TX05027 Bit Screwdriver, #T27 Point, 2 in OAL

ITM TX05025 Bit Screwdriver, #T25 Point, 2 in OAL

ITM TX05020 Bit Screwdriver, #T20 Point, 2 in OAL

ITM TX05015 Bit Screwdriver, #T15 Point, 2 in OAL

ITM TX05010 Bit Screwdriver, #T10 Point, 2 in OAL

ITM TX02540 Bit Screwdriver, #T40 Point, 1 in OAL

ITM TX02530 Bit Screwdriver, #T30 Point, 1 in OAL

ITM TX02527 Bit Screwdriver, #T27 Point, 1 in OAL

ITM TX02525 Bit Screwdriver, #T25 Point, 1 in OAL

ITM TX02520 Bit Screwdriver, #T20 Point, 1 in OAL

ITM TX02515 Bit Screwdriver, #T15 Point, 1 in OAL

ITM TX02510 Bit Screwdriver, #T10 Point, 1 in OAL

ITM TT02527 Bit Screwdriver, #T20 Point, 1 in OAL

ITM TT02525 Bit Screwdriver, #T25 Point, 1 in OAL

ITM TT02520 Bit Screwdriver, #T20 Point, 1 in OAL

ITM TR10030 Insert Set Screwdriver, 30 Pieces

ITM TH25964 Bit Screwdriver, #9/64 Point, 1 in OAL

ITM TH25732 Bit Screwdriver, #7/32 Point, 1 in OAL

ITM TH25532 Bit Screwdriver, #5/32 Point, 1 in OAL

ITM TH25516 Bit Screwdriver, #5/16 Point, 1 in OAL

ITM TH25332 Bit Screwdriver, #3/32 Point, 1 in OAL

Page 1 of 18

Recently Viewed

The Empire Green Self-Leveling Cross Line Laser provides a bright, durable, and compact, alkaline powered laser level solution that can assist in a variety of layout applications. With a working range of up to 75’, the bright green laser provides pronounced visibility when working even in well-lit conditions. The green line laser is powered by (4) AA Alkaline batteries for up to 15+ hours of continuous runtime, allowing for less downtime versus competitive alkaline laser solutions. This green line laser level also features a locking pendulum and rugged over-molded housing that withstands impact if dropped and maintains proper calibration. The green laser level has a fixed versatile 360° L-bracket with oversized rare earth magnets and rubber standoffs to fix the laser to a variety of materials without damaging finished surfaces. The Green Self-Leveling Cross Line Laser (eLGC) comes with a 1 Year Limited Lifetime Warranty.

Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6162 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.

My Wishlist
Compare

7356 JACOBS CHUCK

Rotary Hammer Accessories
$49.74

5/8" X #2-JT A-4102 STRAIGHT SHANK ARBOR - JAC7356>

10-24" X 5/8" Flat Head Slot Machine Screws

Proto® J5685 Sliding Tee Handle, 3/4 in Drive, Alloy Steel, Full Polished

My Wishlist
Compare

Bondhus® 17936 10-Tool Molded Stand

Hex Key Stands
$4.58

Bondhus® 17936 10-Tool Molded Stand

If you need any additional information, prices, availability, etc. please contact us at 1-800-290-9908 or e-mail us at

Footer Menu