HCI PREFERRED SUPPLIER
5309-M Double Row Ball Bearing • Bore (ID): 45 mm (1.7717 in) • Outside Diameter (OD): 100 mm (3.9370 in) • Width: 39.69 mm (1.5626 in) • Design: Maximum-capacity filling slot (optimized for high radial and two-directional thrust loads). • Configuration:
Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #100760687
Unmounted, Angular Contact Bearing
1.77 in Inner Diameter
3.94 in Outer Diameter
1.56 in Width
Bearing Steel Material
5309-M-FF-G It expands directly on the 5309MFF model you asked about previously by adding an outer ring locating snap ring. It belongs to the 5300-M Medium Series and features a maximum-capacity filling slot design optimized to handle heavy radial loads,
Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #101169019
Unmounted, Angular Contact Bearing
1.77 in Inner Diameter
3.94 in Outer Diameter
1.56 in Width
5310-2-Z-NR DOUBLE SHIELDED BALL BEARINGS WSR
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL53102ZNR >
5311-2-Z Double Row Shielded Ball Bearings WSR
DOUBLE ROW SHIELDED BALL BEARING-GUL53112Z >
5311-2-Z-NR DOUBLE SHIELDED BALL BEARINGS WSR
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL53112ZNR >
5311-A-2-RS Double Row Sealed Ball Bearing
DOUBLE ROW SEALED BALL BEARING-GUL5311A2RS >
5312 Double Row Open Face Ball Bearing
DOUBLE ROW OPEN FACE BALL BEARING-GUL5312 >
5316-H Double Row Bearing
Type: Double-row angular contact ball bearing Bore Diameter: 80 mm (3.15 in) Outside Diameter: 170 mm Width: 68.3 mm (2.6875 in) Load Support: High radial and axial loads in both directions
53166 #12 Fiber Lass-handled Aluminum Scoops
#12 FIBER LASS-HANDLED ALUMINUM SCOOPS-UNI53166 >
531687 DO-IT-BEST/HWI PRODUCTS
FLUSH MOUNT BATHROOMEX HAUST FAN-JWH531687 >
5352 REDNECK TRAILER 1500# Auto-Brake Manual Hand Winch
1500# AUTO-BRAKE MANUAL HAND WINCH
54-008 STANLEY TOOLS 8-OZ WOOD-HANDLED BALLPEIN HAMMERS
8-OZ WOOD-HANDLED BALLPEIN HAMMER-STA54008 >
54-032 STANLEY TOOLS 32 oz. Head Weight, Carbon Steel Head Material, 15-7/8" Overall Length Ball Pein Hammer
32-OZ WOOD-HANDLED BALLPEIN HAMMER
Recently Viewed
MORSE® 36147 2119 Dryseal Pipe Tap, 3/4-14 Thread
1/2 in. trigger speed control reversing. 7.0 amp Milwaukee built motor. Helical cut, heat treated gears with durable, glass reinforced nylon handle. Reversing with all ball and roller bearings. Right angle drill features head and handle swivel 360 deg., can be locked tight in any position. Kit includes tool, open end wrench, 3/16 in. socket wrench, chuck remover bar, side handle and impact resistant carrying case.
MORSE® 15550 1439 Drill Blank, 1/4 in Drill Blank, 4 in L, HSS
MORSE® 43667 1898 Center Cutting Regular Length Single End End Mill, 13/16 in Dia Cutter, 1-1/2 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-5/8 in OAL, Bright
MORSE® 43651 1898 Center Cutting Regular Length Single End End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-5/16 in OAL, Bright
Complete the toughest jobs utilizing the power of the DEWALT 20V MAX* XR 1/2 in. High Torque Impact Wrench. This tool delivers 1030 ft-lbs. of max fastening torque and 1400 ft-lbs. of max breakaway torque, making it ideal for large sized pipe flanges, grooved couplings, wheel lugs, concrete anchor bolt setting and many other heavy-duty impact wrench applications. The PRECISION WRENCH mode is included to help prevent overtightening in forward, and run-off in reverse, for additional user control. Utilize the updated 4-mode push button switch to easily transition speeds and adjust LED brightness when needed.
