HCI PREFERRED SUPPLIER
17115 Oil Seals-1.730" X 2.336" X .250"
OIL SEALS-1.730" X 2.336" X .250"-IMS17115>
17131 Oil Seals-1.734" X 2.449" X .250"
OIL SEALS-1.734" X 2.449" X .250"-IMS17131>
171412 5000lb Capacity 15" X 15.5" X 27.75" Top Wind Bulldog Snap Jacks
5000LB CAPACITY 15" X 15.5" X 27.75" TOP WIND BULLDOG SNAP RING JACK-HBC171412 >
17146 Oil Seals-1.719" X 2.562" X .500"
OIL SEALS-1.719" X 2.562" X .500"-IMS17146>
172-CA-2-2 1/8" Self-aligning Compression Tee
1/8" SELF-ALIGNING COMPRESSION TEE-FTG172CA22 >
17265 Oil Seals-1.750" X 2.374" X .438"
OIL SEALS-1.750" X 2.374" X .438"-IMS17265>
17286 Oil Seals-1.766" X 2.412" X .375"
OIL SEALS-1.766" X 2.412" X .375"-IMS17286>
1729 Tapered Roller Bearing Cups
TAPERED ROLLER BEARING CUPS-TPR1729 >
1730 3.5-CU/FT 30" X 17" X 12" JOB BOX
3.5-CU/FT 30" X 17" X 12" JOB BOX-GRP1730 >
17340 Oil Seals-1.750" X 2.441" X .250"
OIL SEALS-1.750" X 2.441" X .250"-IMS17340>
1736 7.8-CU/FT 36" X 17" X 22" JOB BOX
7.8-CU/FT 36" X 17" X 22 JOB BOX-GRP1736 >
17392 Oil Seals-1.750" X 2.502" X .250"
OIL SEALS-1.750" X 2.502" X .250"-IMS17392>
17461 Oil Seals-1.750" X 2.623" X .250"
OIL SEALS-1.750" X 2.623" X .250"-IMS17461>
1746205-014 7/8"-ID Fl/OD Insert Bearing
Bore Diameter (ID): 7/8 inch (22.225 mm) Outer Diameter (OD): 2.0472 inches (52 mm) Locking Type: Set screw or collar locking variant Outer Ring: Spherical design for self-alignment in housings Material: Standard high-strength bearing steel
175000 Heavy Duty A Frame Trailer Jack, This Item Is A Topwind, Bulldog Tongue Jack With A Corrosion Resistant Gray Powder Paint.
HEAVY DUTY A FRAME TRAILER JACK, THIS ITEM IS A TOPWIND, BULLDOG TONGUE JACK WITH A CORROSION RESISTANT GRAY POWDER PAINT.-HBC175000 >
17520 Tapered Roller Bearing Cups
TAPERED ROLLER BEARING CUPS-TPR17520 >
Recently Viewed
LittelfuseĀ® POWR-GARDĀ® JLLS150 Current Limiting Fast Acting Fuse, 150 A, 600 V AC/300 V DC, 20/200 kA Interrupt, T Class, Cartridge Body
Space saving Class T fuses are the most compact fuses available in ratings above 30 A - less than one-third the size of comparable Class R fuses. When rated in accordance with the NEC, Class T fuses provide Fast Acting overload and short circuit protection for non-inductive circuits and equipment. Used in inductive circuits, the ampere rating of Class T fuses must be increased to prevent opening on inrush currents. In such instances, Class T fuses may provide only short circuit protection.
The LKN Series are fuse links designed for Littelfuse RLN series renewable fuses. Traditionally, Class H fuses were used to provide low cost protection of general purpose feeder and branch circuits where available short-circuit currents did not exceed 10,000 amperes. However, generally increased levels of available fault current and the distinct possibility that renewable fuses may be improperly renewed, rendering them unsafe, have all but eliminated the use of these fuses in new applications. In addition, escalating labour costs and increasing automation, which makes downtime very expensive, have greatly reduced or eliminated the cost savings attributed to renewable fuses.
With LevitonĀ® extensive assortment of combination devices, you can fill a 1-gang space with two switches, a switch and receptacle, even a switch and GFCI. From sensor guide lights to multi-purpose styles and tamper resistant receptacles, we accommodate your every need. These devices come in a range of colors and are backed by a limited 2-years warranty. Built to last and designed to save space, these attractively styled devices are at home in any setting.
EATON DG221NRB DG Series Cartridge Fusible General Duty Safety Switch, 240 V AC, 30 A, 1/2 to 3 hp, 3 to 7-1/2 hp, DPST Contact, 2 Poles
General duty safety switches are used in residential and commercial applications. They are suitable for light duty motor circuits and service entrance applications. Fusible (plug or cartidge) and non-fusible switches are available.
Familiar and functional, LevitonĀ® traditional wallplates are designed for use with traditional LevitonĀ® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. LevitonĀ® offers traditional wallplates in a vast array of colors and configurations.
Connecticut Electric View-Pakā¢ VPKUBIP130 UBIP Type P Replacement Circuit Breaker, 120 V AC, 30 A, 10 kA Interrupt, 1 Poles
Connecticut Electric View-Pakā¢ VPKUBIP130 UBIP Type P Replacement Circuit Breaker, 120 VAC, 30 A, 10 kA Interrupt, 1 Poles, Thermal/Magnetic Trip
