HCI PREFERRED SUPPLIER
6003-2-RS-NR Double Sealed Ball Bearing With Snap RIng
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL60032RSNR >
6003-2-P-XXXL Xxx-large 2-pocket Tyvek Shirts
XXX-LARGE 2-POCKET TYVEK LAB COATS-CHR60032PXXXL>
6003-2-P-XXL 2x-lrg Tyvek Lab Coats With 2" Pockets
2X-LRG TYVEK LAB COATS WITH 2" POCKETS-CHR60032PXXL >
6003-2-P-M Medium 2-pocket Tyvek Shirts
MEDIUM 2-POCKET TYVEK LAB COATS-CHR60032PM>
6003-2-P-L Large Tyvek Lab Coats With 2" Pockets
LARGE TYVEK LAB COATS WITH 2" POCKETS-CHR60032PL >
6002 SNR BEARINGS 15-MM-ID Open Face Ball Bearing
15-MM-ID OPEN-FACE BALL BEARINGS
6001-XXXXXXL 6xl Coverall With Plain Wrist & Ankle
6XL COVERALL WITH PLAIN WRIST & ANKLE - CHR6001XXXXXXL >
6001-XS 4-mil No-pwdr Nitrile
4-MIL NO-PWDR NITRILE GLOVE-BX/100-GLV6001XS>
6001-HEWA-XXXXXL 5xl Coverall With Hood & Elastic Wrist & Ankles
5XL COVERALL WITH HOOD & ELASTIC WRIST & ANKLES - CHR6001HEWAXXXXXL >
6001-H-EWA-S Small Coverall With Hood & Elastic Wrist & Ankles
SMALL COVERALL WITH HOOD & ELASTIC WRIST & ANKLES - CHR6001HEWAS >
6001-EWA-XXXXL Xxxxl Tyvek Coveralls W/elastic At Wrists & Ankles
XXXXL TYVEK COVERALLS W/ELASTIC AT WRISTS & ANKLES
6001-EWA-XXXL 3xl Tyvek Coverall With Elastic Wrists & Ankles
3XL TYVEK COVERALL WITH ELASTIC WRISTS & ANKLES - CHR6001EWAXXXL >
6001-EWA-XXL 2xl Tyvek Coverall With Elastic Wrists & Ankles
2XL TYVEK COVERALL WITH ELASTIC WRISTS & ANKLES - CHR6001EWAXXL >
6001-EWA-XL Xl Tyvek Coverall With Elastic Wrists & Ankles
XL TYVEK COVERALL WITH ELASTIC WRISTS & ANKLES - CHR6001EWAXL >
Recently Viewed
Dimensions: 6" Outside Diameter (OD) x 3/4" Hub Width x 3/4" Bore Size (6 × 3/4 × 3/4). Wire Rope Size Compatibility: 3/8" wireline / wire rope. Bushing Material: Equipped with S.A.E. 660 Bronze Bushings featuring a "Figure 8" oil groove to optimize shaft lubrication. Weight: Approximately 2.5 lbs.
Delivering 450 ft-lb fastening torque and 600 ft-lb nut-busting torque, the M18™ FUEL™ mid-torque impact wrench is more powerful while also being upto 4 in shorter and upto 2 lb lighter than many competitive impact wrenches. The POWERSTATE™ brushless motor delivers upto 0 to 2400 rpm resulting in increased productivity. REDLINK™ Plus™ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or over heating. For use with REDLITHIUM™ compact batteries or extended capacity batteries (sold separately), the M18™ FUEL™ mid-torque delivers more work per charge and more work over the life of the pack than competitive batteries on the market. The 3-mode DRIVE CONTROL™ provides greater control over output speed and power for greater versatility. At 6.7 in length and 5.3 lb with a 5 Ah battery, the M18™ fuel 1/2 in mid-torque impact wrench delivers the balance and weight desired by professionals for all day use. This tool includes a 1/2 in pin detent anvil which provides superior socket retention. A new overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.
S-2130-1/2 CROSBY 1/2" FORGED BOLT SHACKLES
The Crosby S-2130 1/2" is a self-colored (unpainted/natural finish), carbon steel bolt-type anchor shackle featuring a Working Load Limit (WLL) of 2 metric tons (4,400 lbs)
12-OZ VACUUM PUMP OIL-
2-1/2 GALLON DEF. DIESEL EXHAUST FLUID
orking Load Limit: 5,700 lbs.
Safety Factor: 4:1
Grade: 80 / 100
Chain Size: 5/16"
Item Weight: 0.35 lbs.
Standards: Meets or exceeds ASTM A952 / A952M & ASME B30.26 requirements.
Manufacturer Name: Crosby®
