Alemite Corp
Alemite® 131266 Gasket, 1-1/16 in OD, For Use With 3942-B Centralized Oil Lubricator, Copper
Alemite® 131266 Gasket, 1-1/16 in OD, For Use With 3942-B Centralized Oil Lubricator, Copper
Alemite® 1608-B Drive-In Straight Grease Fitting, 35/64 in OAL, 1/4 in L Shank, Copper/Nickel, Trivalent Zinc Plated
Alemite® 1610-BL Straight Thread Fitting, 1/8 in PTF Thread, 11/16 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
Alemite® 1610-BL Straight Thread Fitting, 1/8 in PTF Thread, 11/16 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
Alemite® 1612-B 65 deg Thread Fitting, 1/8 in NPTF Thread, 27/32 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
Alemite® 1612-B 65 deg Thread Fitting, 1/8 in NPTF Thread, 27/32 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
Alemite® 1618-B Straight Thread Fitting, 1/8 in Female NPTF Thread, 1 in OAL, 9/32 in L Shank, Trivalent Zinc Plated
Alemite® 1618-B Straight Thread Fitting, 1/8 in Female NPTF Thread, 1 in OAL, 9/32 in L Shank, Trivalent Zinc Plated
Alemite® 1627-B Straight Thread Fitting, 1/4 in PTF Thread, 7/8 in OAL, 27/64 in L Shank, Trivalent Zinc Plated
Alemite® 1627-B Straight Thread Fitting, 1/4 in PTF Thread, 7/8 in OAL, 27/64 in L Shank, Trivalent Zinc Plated
Alemite® 1629-B Lubrication Fitting, 1/4-18 PTF Thread, 31/32 in OAL, 11/32 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1629-B Lubrication Fitting, 1/4-18 PTF Thread, 31/32 in OAL, 11/32 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1637-B1 45 deg Thread Fitting, 1/4-28 Taper Thread, 13/16 in OAL, 13/64 in L Shank, Trivalent Zinc Plated
Alemite® 1637-B1 45 deg Thread Fitting, 1/4-28 Taper Thread, 13/16 in OAL, 13/64 in L Shank, Trivalent Zinc Plated
Alemite® 1641-B Straight Thread Fitting, 1/4-28 Taper Thread, 35/64 in OAL, 3/16 in L Shank, Trivalent Zinc Plated
Alemite® 1641-B Straight Thread Fitting, 1/4-28 Taper Thread, 35/64 in OAL, 3/16 in L Shank, Trivalent Zinc Plated
Alemite® 1644-B Straight Thread Forming Grease Fitting Zerk, 1/8 in PTF SAE Special Extra Short Thread, 9/16 in OAL, 15/64 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1644-B Straight Thread Forming Grease Fitting Zerk, 1/8 in PTF SAE Special Extra Short Thread, 9/16 in OAL, 15/64 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1646-B1 65 deg Drive-In Grease Fitting, 45/64 in OAL, 7/32 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1646-B1 65 deg Drive-In Grease Fitting, 45/64 in OAL, 7/32 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1649-B 65 deg Thread Fitting, 1/8 in PTF Thread, 2-3/4 in OAL, 2-1/4 in L Shank, Trivalent Zinc Plated
Alemite® 1649-B 65 deg Thread Fitting, 1/8 in PTF Thread, 2-3/4 in OAL, 2-1/4 in L Shank, Trivalent Zinc Plated
Alemite® 1652-B Straight Thread Fitting, 1/4-28 Taper Thread, 11/16 in OAL, 23/64 in L Shank, Trivalent Zinc Plated
Alemite® 1652-B Straight Thread Fitting, 1/4-28 Taper Thread, 11/16 in OAL, 23/64 in L Shank, Trivalent Zinc Plated
Alemite® 1669-B Straight Thread Fitting, 1/8 in PTF Thread, 1-3/4 in OAL, 1-17/64 in L Shank, Trivalent Zinc Plated
Alemite® 1669-B Straight Thread Fitting, 1/8 in PTF Thread, 1-3/4 in OAL, 1-17/64 in L Shank, Trivalent Zinc Plated
Alemite® 1688-B Lubrication Fitting, 1/8-27 PTF Thread, 57/64 in OAL, 19/64 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1720-B Straight Thread Forming Grease Fitting, 1/8 in Special Taper Male Thread, 5/8 in OAL, 0.24 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1720-B Straight Thread Forming Grease Fitting, 1/8 in Special Taper Male Thread, 5/8 in OAL, 0.24 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1723-B 90 deg Thread Forming Fitting, 1/8 in Taper Thread, 49/64 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
Alemite® 1724-B 45 deg Thread Forming Fitting, 1/8 in Taper Thread, 0.83 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
Alemite® 1743-B Straight Drive Fitting, 35/64 in OAL, 1/4 in L Shank, Trivalent Zinc Plated
Alemite® 1743-B Straight Drive Fitting, 35/64 in OAL, 1/4 in L Shank, Trivalent Zinc Plated
Alemite® 3014-B Straight Hydraulic Fitting, 1/4-28 UNF Thread, 1-5/8 in OAL, 1 in L Shank, Trivalent Zinc Plated
Alemite® 3014-B Straight Hydraulic Fitting, 1/4-28 UNF Thread, 1-5/8 in OAL, 1 in L Shank, Trivalent Zinc Plated
Alemite® 3016 Straight Special Thread Fitting, #10-32 UNF-2A Thread, 1/2 in OAL, 1/8 in L Shank, Steel, Trivalent Clear Zinc Plated
Alemite® 3016 Straight Special Thread Fitting, #10-32 UNF-2A Thread, 1/2 in OAL, 1/8 in L Shank, Steel, Trivalent Clear Zinc Plated
Alemite® 3038-B Straight Thread Forming Grease Fitting, 1/4-28 Special Taper Male Thread, 37/64 in OAL, 0.19 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 3038-B Straight Thread Forming Grease Fitting, 1/4-28 Special Taper Male Thread, 37/64 in OAL, 0.19 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 305859 Straight Grease Fitting Adapter, 7/16-27 UNS-2A Male x 1/8 in Female NPTF Thread, 0.78 in OAL, Steel, Zinc Plated
Alemite® 305859 Straight Grease Fitting Adapter, 7/16-27 UNS-2A Male x 1/8 in Female NPTF Thread, 0.78 in OAL, Steel, Zinc Plated
Alemite® 307111 Standard Duty Air Coupler, For Use With Filters, Lubricators, Regulators, 1/4 in MNPT
Alemite® 307111 Standard Duty Air Coupler, For Use With Filters, Lubricators, Regulators, 1/4 in MNPT
Recently Viewed
Starrett® 98Z-12 98 Series Non-Magnetic Precision Uncalibrated Machinist's Level, 12 in L, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 300mm (12") size, with wood case.
Angle Meter provides large readable scale for accurate readings from 0 Deg to 90 Deg in any quadrant. Integral magnetic base frees hands when used on ferrous surfaces. Meter measures any angle for pitch or slope and provides handy rise, run, angle and pitch information on back of the tool.
The Starrett 827 Edge Finder is for fast, accurate work location. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines, all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. Double End, .500" Body Dia., .200" Contact Dia. and Pointed Contact.
Starrett® 98-6 98 Series Precision Uncalibrated Machinist's Level, 6 in L, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 150mm (6") size, without case.
Starrett® B120A-6 Accurate Direct Reading Reliable Dial Caliper With Plastic Case, 0 to 6 in, Graduation 0.001 in, 5/8 in Inside x 1-1/2 in Outside D Jaw, Stainless Steel, Satin
The Starrett 120 Series Dial Caliper is the only American made dial caliper. The caliper is used by mechanics and toolmakers everywhere. Features include direct reading, ease-of-handling, reliability and accuracy making the Starrett 120, 120M Series Dial Calipers one of the handiest measuring tools available. This model features black dial, 0-6" range, and .001" graduations. 6", Black Dial, Fitted Plastic Case.
The Starrett 827 Edge Finder is for fast, accurate work location. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines, all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. Single End, .375" Body Dia., .200" Contact Dia.
