1617-2-GAL CATO OILS
2-GAL 80-W/90-W JT-7 GEAR OIL-CAT16172GAL >
Recently Viewed
2-GAL 80-W/90-W JT-7 GEAR OIL-CAT16172GAL >
24X2" X 12" GRINDING WHEEL-MGW66250612421 >
Keeney 30-8WK Branch Tailpiece With 7/8 in OD Branch, 1-1/2 in Pipe, 8 in L, Direct Connect Connection, Polypropylene
White polypropylene 8 in long branch tailpiece with 1-1/2 in inlet and 7/8 in OD dishwasher branch. Direct connect.
Gardner Bender 10-121 Butt Splice, 22 to 18 AWG Conductor, 0.97 in L, Red
Hougen® 12156 12000 Annular Cutter, 1-3/4 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Dichtomatik N70145 O-Ring, 145 Dash Number, 2.55 in ID x 2.756 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
