CRC® 03065 Extremely Flammable Synthetic Belt Dressing Lubricant, 16 oz Aerosol Can, Liquid, Light Amber, Mild Solvent
CRC® 03065 Extremely Flammable Synthetic Belt Dressing Lubricant, 16 oz Aerosol Can, Liquid, Light Amber, Mild Solvent
-
BrandCRC®
-
UPC078254030654
-
Manufacturer Part Number03065
-
CountryUSA
-
Temperature Range350 deg F Continuous, 400 deg F Intermittent
-
Flash Point<0 deg F
-
Chemical BasePolyisobutene
-
FormLiquid
-
ColorLight Amber
-
TypeExtremely Flammable Synthetic
-
CompositionNaphtha (Petroleum), Hydrotreated Light, Liquefied Petroleum Gas, 2-Methylpentane, Isobutylene Polymer, n-Hexane
-
VOC Content628 g/L
-
Container Size16 oz
-
Container TypeAerosol Can
-
Net Weight10 oz
-
Specific Gravity0.6783
-
Odor/ScentMild Solvent
- A food grade belt dressing to extend the life of drive belts by improving traction and allowing runs under reduced belt tension
- Provides a temporary, food grade, synthetic treatment for worn belts that extends belt life by reducing slippage, hardening, glazing, dirt build-up and friction
- Belt dressing can be used on leather, rubber, canvass or fabric and is ideally suited for flat, round and V-belts
- Belt dressing also helps eliminate annoying squeaks and squeals
- Formulated with a tacky, non-drying, water resistant polymer
- Plastic safe
- 350 deg F (continuous) and 400 deg F (intermittent) working temperature
- NSF H1 Registered for incidental food contact
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 1D267 |
| Fastenal | 63330 |
-
Alternative Part Number1003326
-
UNSPSC15121526
-
IDEA Index ID8423532
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|RoHS Compliant|OSHA 29 CFR 1910.1200|NSF 017386 H1
-
SDS
Recently Viewed
CRC® 03065 Extremely Flammable Synthetic Belt Dressing Lubricant, 16 oz Aerosol Can, Liquid, Light Amber, Mild Solvent
CRC® 03065 Extremely Flammable Synthetic Belt Dressing Lubricant, 16 oz Aerosol Can, Liquid, Light Amber, Mild Solvent
Streamlight® 22010 USB Charger Kit, 2600 mAh Li-Ion Battery, 3-1/2 hr Single Bay, 3-1/2 hr Left Bay Priority, 6-1/2 hr Right Bay Charging, 2 Batteries
The 18650 Charger Kit comes with (2) Streamlight® 18650 USB batteries, one USB cord, and 2-bay charging cradle. These batteries can be recharged using the micro USB port in the battery (with a cord) or via the charging cradle.
Energizer® 675 Mercury Free Non-Rechargeable Hearing Aid Battery With Blue Tab, Zinc Air, 1.4 V Nominal, 575 mAh Nominal, 675
Energizer has adopted the industry standard color-coded system to make it easier to know what size battery you need. When you get your hearing aid, ask your doctor which color corresponds to the correct hearing aid battery. Below is the color code and battery type chart. Energizer Hearing Aid batteries deliver consistent sound quality and hold power for up to 4 years in storage.
Magnolia Brush 1024-LH 10 Line Floor Brush, 24 in W Brush, 3 in L Trim Tampico Trim
Magnolia Brush 1024-LH 10 Line Floor Brush, 24 in W Brush, 3 in L Trim Tampico Trim
Cleanfit Blue Monster® 70886 Non-Toxic Thread Seal Tape, 1429 in L x 3/4 in W x 0.0035 in THK, PTFE
Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That's 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.
Cleanfit Blue Monster® 70885 Non-Toxic Thread Seal Tape, 1429 in L x 1/2 in W x 0.0035 in THK, PTFE
Blue Monster PTFE thread seal tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1429 in roll. That's 5 times more tape than conventional rolls of low density thin tapes. Fewer wraps are necessary to affect a leak proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.
