Grease Fittings & Adapters
Alemite® 317400 Straight Top Vent Pressure Relief Fitting, 1/8 in PTF SAE Special Short Thread, 1/2 in OAL, 7/16 in L Shank, Carbon Steel, Zinc Yellow
Alemite® 317400 Straight Top Vent Pressure Relief Fitting, 1/8 in PTF SAE Special Short Thread, 1/2 in OAL, 7/16 in L Shank, Carbon Steel, Zinc Yellow
Alemite® 336551 Fitting Extension, 1/4-28 Male Taper x 1/4-28 UNF-3B Female Thread, 1-1/4 in OAL, 1 in L Shank, Carbon Steel, Zinc Clear
Alemite® 336551 Fitting Extension, 1/4-28 Male Taper x 1/4-28 UNF-3B Female Thread, 1-1/4 in OAL, 1 in L Shank, Carbon Steel, Zinc Clear
Alemite® 51942 Straight Grease Fitting Adapter, 1/4-28 SAE-LT Taper Male x 1/8 in Female NPTF Thread, Steel, Zinc Plated
Alemite® 51942 Straight Grease Fitting Adapter, 1/4-28 SAE-LT Taper Male x 1/8 in Female NPTF Thread, Steel, Zinc Plated
Alemite® 51943 90 deg Hydraulic Elbow, 1/4-28 Male Taper x 1/8 in Female NPTF Thread, 1.03 in OAL, 0.22 in L Shank
Alemite® 51943 90 deg Hydraulic Elbow, 1/4-28 Male Taper x 1/8 in Female NPTF Thread, 1.03 in OAL, 0.22 in L Shank
Alemite® A1184 Button Head Fitting, 1/8 in PTF Thread, 3/4 in OAL, 11/32 in L Shank, Trivalent Zinc Plated
Alemite® A1184 Button Head Fitting, 1/8 in PTF Thread, 3/4 in OAL, 11/32 in L Shank, Trivalent Zinc Plated
Alemite® A1186 Button Head Fitting, 1/4 in NPTF Thread, 53/64 in OAL, 27/64 in L Shank, Trivalent Zinc Plated
Alemite® A1186 Button Head Fitting, 1/4 in NPTF Thread, 53/64 in OAL, 27/64 in L Shank, Trivalent Zinc Plated
Alemite® B1613-B 90 deg Standard Grease Fitting, 1/8 in MPTF Thread, 27/32 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
Alemite® B1613-B 90 deg Standard Grease Fitting, 1/8 in MPTF Thread, 27/32 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
Alemite® B322610 Loader Fitting, 1/8 in Female NPTF Thread
Alemite® Z737 Flush Style Standard Nozzle Coupler, 1/8 in Female NPTF Thread, Steel, Zinc Plated
Alemite® Z737 Flush Style Standard Nozzle Coupler, 1/8 in Female NPTF Thread, Steel, Zinc Plated
Open up clogged grease fittings with the Grease Buster. Simply fill with a solvent and tap the piston with a hammer. The updated design includes a textured grip and two O rings on the piston. Manufactured by LockNLube in the USA. Cleans and flushes out old dried grease from fittings, pins, shafts, bushingsand joints, Uses penetrating fluid and hydraulic pressure, Reduces downtime. Much cheaper than new bearings, Hose extension and pneumatic piston available, Not for use with sealed bearings
HCI Preferred Supplier 36110 Ball Check Straight Grease Fitting, 1/8-27 NPTF Thread, 0.66 in OAL, Steel
HCI Preferred Supplier 36110 Ball Check Straight Grease Fitting, 1/8-27 NPTF Thread, 0.66 in OAL, Steel
HCI Preferred Supplier 36116 Ball Check Grease Fitting, 1/8-27 NPTF Thread, 0.88 in OAL, Steel
Heritage™ H1688 45 deg Imperial Zerk Grease Fitting, 1/8-27 Thread, 1.07 in OAL, 0.28 in L Shank, Steel, Zinc Yellow
HCI Preferred Supplier 36120 Ball Check Grease Fitting, 1/8-27 NPTF Thread, 0.84 in OAL, Steel
HCI Preferred Supplier 36120 Ball Check Grease Fitting, 1/8-27 NPTF Thread, 0.84 in OAL, Steel
HCI Preferred Supplier 36130 Ball Check Grease Fitting, 1/4-18 NPTF Thread, 0.84 in OAL, Steel
HCI Preferred Supplier 36130 Ball Check Grease Fitting, 1/4-18 NPTF Thread, 0.84 in OAL, Steel
HCI Preferred Supplier 36132 Ball Check Grease Fitting, 1/4-18 NPTF Thread, 0.97 in OAL, Steel
HCI Preferred Supplier 36132 Ball Check Grease Fitting, 1/4-18 NPTF Thread, 0.97 in OAL, Steel
HCI Preferred Supplier 36140 Short Ball Check Grease Fitting, 1/4-28 NPTF Taper Thread, 0.54 in OAL, Steel
HCI Preferred Supplier 36140 Short Ball Check Grease Fitting, 1/4-28 NPTF Taper Thread, 0.54 in OAL, Steel
HCI Preferred Supplier 36150 Ball Check Grease Fitting, 1/4-28 Taper Thread, 3/4 in OAL, Steel
HCI Preferred Supplier 36150 Ball Check Grease Fitting, 1/4-28 Taper Thread, 3/4 in OAL, Steel
HCI Preferred Supplier 36164 Ball Check Grease Fitting, 3/16 in Thread, 0.52 in OAL, Steel
HCI Preferred Supplier 36164 Ball Check Grease Fitting, 3/16 in Thread, 0.52 in OAL, Steel
HCI Preferred Supplier 36166 Ball Check Grease Fitting, 1/4 in Thread, 0.55 in OAL, Steel
HCI Preferred Supplier 36166 Ball Check Grease Fitting, 1/4 in Thread, 0.55 in OAL, Steel
HCI Preferred Supplier 36168 Ball Check Grease Fitting, M6x1 Thread, 16 mm OAL, Steel
HCI Preferred Supplier 36168 Ball Check Grease Fitting, M6x1 Thread, 16 mm OAL, Steel
HCI Preferred Supplier 36170 Ball Check Grease Fitting, M6x1 Thread, 21 mm OAL, Steel
HCI Preferred Supplier 36170 Ball Check Grease Fitting, M6x1 Thread, 21 mm OAL, Steel
HCI Preferred Supplier 36172 Ball Check Grease Fitting, M6x1 Thread, 18 mm OAL, Steel
HCI Preferred Supplier 36172 Ball Check Grease Fitting, M6x1 Thread, 18 mm OAL, Steel
HCI Preferred Supplier 36174 Ball Check Grease Fitting, M8x1 Thread, 16 mm OAL, Steel
HCI Preferred Supplier 36174 Ball Check Grease Fitting, M8x1 Thread, 16 mm OAL, Steel
HCI Preferred Supplier 36176 Ball Check Grease Fitting, M8x1 Thread, 21 mm OAL, Steel
HCI Preferred Supplier 36176 Ball Check Grease Fitting, M8x1 Thread, 21 mm OAL, Steel
Recently Viewed
Kuriyama VFL200X300 VFL Water Discharge Hose, Hose End Style, 300 ft L, 65 psi Working, PVC, Import
Gates® Power Transmission Hi-Power® II PowerBand® 5/B83 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 86 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Gates® Power Transmission PowerGrip® GT®3 1064-8MGT-30 Synchronous Belt, 30 mm W, 1064 mm OAL, 8 mm Pitch, 133 Teeth, Neoprene
Engineered with the latest in advanced technology and materials science expertise, Gates PowerGrip™ GT4 delivers the highest power-carrying capacity of any belt in its class. In addition, Gates designed a belt with increased chemical resistance and larger temperature range capability. Gates PowerGrip GT4 belt delivers improved performance over a wide range of industrial applications. The 8MGT and 14MGT pitches are the optimum choice for high performance drives in the machine tool, paper and textile industries where durability and low maintenance are required. From resource processing to heavy manufacturing, automated production to custom assembly — Gates PowerGrip GT4 solutions improve uptime, efficiency, productivity, reliability and safety for industries around the world.
200-W 130-VOLT INSIDE FROST BULBS-BUL200A23 >
Gates® Power Transmission PowerGrip® GT®3 1800-8MGT-85 Synchronous Belt, 85 mm W, 1800 mm OAL, 8 mm Pitch, 225 Teeth, Neoprene
Engineered with the latest in advanced technology and materials science expertise, Gates PowerGrip™ GT4 delivers the highest power-carrying capacity of any belt in its class. In addition, Gates designed a belt with increased chemical resistance and larger temperature range capability. Gates PowerGrip GT4 belt delivers improved performance over a wide range of industrial applications. The 8MGT and 14MGT pitches are the optimum choice for high performance drives in the machine tool, paper and textile industries where durability and low maintenance are required. From resource processing to heavy manufacturing, automated production to custom assembly — Gates PowerGrip GT4 solutions improve uptime, efficiency, productivity, reliability and safety for industries around the world.
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
