Tractor Accessories
30" SWINGING DRAWBARS OVERALL LENGTH 29"-HIGSD921>
UNIVERSAL STABILIZER BRACKETS-HIGSB631 >
ADJUSTABLE FORGED STABILIZER ARM FROM 27-1/2" TO 35" WITH 7/8" PIN HOLES-HIGSA6260 >
END SQUARE HOLE WASHER FOR INTERNATIONAL HARVESTER-KABP481611>
CATEGORY 1 FORGED LIFT ARMS-HIGLA335>
DOZER LIQUID FILLED GRADE GAUGES-KABGG3000>
LBRSS3123 SS QR PIN-HIGBLBS065>
2"-NPT FUEL TANK CAPS (CAP ONLY)-HER60003>
2" NPT FUEL TANK CAPS-HER60002>
2" NPT FUEL TANK CAP-HER60001>
# 1 & 2" BALL SOCKET-HIG49B320>
3/4" TRACTOR DRAW BAR HOOKS-HIG18834>
1" X 1-1/8" RECTANGULAR SHAFT (FT)-GGM1381618 >
3/4" X 7/8" RECTANGULAR SHAFT (FT)-GGM1381214 >
1-3/16" SQUARE SHAFT (FT)-GGM1361900 >
1" X 1-1/8" RECTANGULAR TUBE (FT)-GGM1341618 >
4"EX HAUST WEATHER CAP-HIG11043 >
3-3/4" EX HAUST WEATHER CAP-HIG11042 >
3-1/2"EX HAUST WEATHER CAP-HIG11041 >
3-1/4"EX HAUST WEATHER CAP-HIG11040 >
3"EX HAUST WEATHER CAP-HIG11039 >
2-3/4" EXHAUST WEATHER CAPS-HIG11038>
2-1/2"EX HAUST WEATHER CAP-HIG11037 >
2-1/4" EXHAUST WEATHER CAP-HIG11036 >
Recently Viewed
1-15/16" -ID TAKE-UP BEARING UNIT-BRWTUE920X115/16 >
16-MM INTERNAL RETAINING RINGS-ANR1300016MM>
10-MM INTERNAL RETAINING RINGS
Milton® 1818 G Style Plug, 1/2 in, FNPT, Hardened Steel, Domestic
1" X 12" Square Plain Keystock
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
