Damar® 00117D Incandescent Bulb, 25 W, E26 Lamp
Damar® 00117D Incandescent Bulb, 25 W, E26 Medium A19 Lamp
-
BrandDamar®
-
Manufacturer Part Number00117D
-
CountryUSA
-
Voltage Rating130 V AC
-
Wattage25 W
-
Average Life4000 hr
-
Designation25A19RS
-
Dimensions2.4 in Dia x 4 in L
-
Lamp Base TypeE26
-
Lamp FinishInside Frosted
-
Lamp TypeA19
-
UNSPSC39101612
-
Package Description4/PK
-
Standards/ApprovalsOSHA Certified
Recently Viewed
Damar® 00117D Incandescent Bulb, 25 W, E26 Medium A19 Lamp
18" FLEXIBLE COPPER WITH HEATER LINE-JWH407223 >
RUS-KIL VISTA GREEN SPRAY PAINT-BLP1041S >
Browning® 1296516 T55L Automatic Torque Limiter, 1-1/4 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Rust-Oleum® Steel-Tech™ 9101402 9100 System Standard Epoxy Mastic Activator, 1 gal Container, Liquid Form, Metallic Gray, 125 to 225 sq-ft/gal Coverage
Rust-Oleum® Steel-Tech™ 9101402 9100 System Standard Epoxy Mastic Activator, 1 gal Container, Liquid Form, Metallic Gray, 125 to 225 sq-ft/gal Coverage
Morse® 194618 A Plate Ground Sprocket, 22 Teeth, For Use With Model 350 Torque Limiter Model, 119.89 mm OD
Morse® 194618 A Plate Ground Sprocket, 22 Teeth, For Use With Model 350 Torque Limiter Model, 119.89 mm OD
