4294-C 4-Pin Fluorescent Bulb
4-PIN FLUOR/BULB
Recently Viewed
4-PIN FLUOR/BULB
Browning® 1045590 VP Series Type 2 Variable Pitch Sheave, 1-1/8 in Finished Bore, 5.95 in OD, 1 Groove, 4.4 to 5.4 in (A/4L)/4.7 to 5.9 in (B/5L/5V) Dia Pitch, 7/8 to 1-1/4 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
CONVERTS 2 OUTLETS INTO 6 SURGE PROTECTED OUTLETS WITH INDICATOR. VOLTAGE PROTECTION RATING: 900V. MAXIMUM SPIKE CURRENT; 22.500A
-JWH509892>
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
_100x100.jpg)
32-WATT WW MED CFL BULB (150-W EQ)-JWH509845>
Oatey® 31014 Low VOC Regular Body PVC Cement, 16 oz Container, Clear, For Use With PVC Pipe
Oatey® PVC Regular Bodied Fast Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. It is easy to apply with included in-lid dauber and its clear color provides a clean finish. This regular bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 4 in. for Schedule 40 and up to 2 in. for Schedule 80 with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
