745420 DO-IT-BEST/HWI PRODUCTS
20-QT BUCKET-JWH745420>
Recently Viewed
20-QT BUCKET-JWH745420>
Koyo 30204JR Metric Series Caged Tapered Roller Bearing, 20 mm Dia Bore, 47 mm OD, 1 Row, 15.25 mm W, 27 kN Dynamic/27.2 kN Static Load
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
Champion CT5-1-3/4 Hole Cutter, 1-3/4 in Dia, 3/16 in D Cutting, Carbide Cutting Edge
Champion CT5-1-3/4 Hole Cutter, 1-3/4 in Dia, 3/16 in D Cutting, Carbide Cutting Edge
TUNGSTEN CARBIDE BURR, 1/4" TREE POINTED (SG-1) WITH 1/4" SHANK. MAXRPM: 70.000. SHANK MOUNTED TUNGSTEN CARBIDE BURRS ARE DOUBLE CUT FOR FINE WORK
ASP-112-2-S Industry Standard Clamping Collar, 2-Piece Construction, 1-3/16 in ID x 2-1/16 in OD x 1/2 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Square-D 30-AMP 3-POLE 208/240-V CONTACTORS SQU 8910-DPA-33-V-09
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This three pole definite purpose contactor has a full load rating of 30 ampere and a resistive rating of 40 amperes. It also has a 2 HP at 115 VAC single phase, 5 HP at 230 VAC single phase and 10 HP at 230 VAC three phase, 15 HP at 460 VAC three phase and 20 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 208/240 VAC 60 Hz, 220 VAC 50 Hz coil. The contactor has straight through wiring. Contactor is 3.75 inches by 2.37 inches and 3.00 tall. These contactors are UL component recognized and CSA certified.
