CC-924-5-GAL MIDLAB INC.
5-GAL CARPET SOIL EXTRACTOR - ML-CC9245GAL >
Recently Viewed
5-GAL CARPET SOIL EXTRACTOR - ML-CC9245GAL >
1-VP-40X7/8 Single Groove Variable Pitch Sheavess 40x7/8
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 degree increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called "Number Of Turns Open From Closed Position"
VP single and double groove sheaves, designed for heavier duty service up to 25 hp.
1 Groove, Finished Bore, Variable Pitch, Cast Iron Sheave, for 3L, 4L or A, 5L or B Section Belt
Type of Bore - Finished
Bore (In) - 7/8
Length Thru Bore - 1 7/8
1/4" 2-PIECE RIGHT HAND FEMALE ROD ENDS-QAPCFR4 >
3.346" X 4.528" X .512" OIL SEALS-TCM85X115X13SC >
McGill® 0000600000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 3/8 in ID x 0.6245 in OD, 1.01 in OAW, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
AIR FILTERS-WIX46798>
