641863 DO-IT-BEST/HWI PRODUCTS
FINGERNAIL BRUSH-JWH641863>
Recently Viewed
FINGERNAIL BRUSH-JWH641863>
MORSE® 11402 1330 General Purpose Jobber Length Drill Bit, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 11402 1330 General Purpose Jobber Length Drill Bit, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
#12 X 1" Stainless Steel Hex Head Sheet Metal Screw
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
The Crescent Nicholson American pattern regular taper file is made for filing handsaws. Triangular shape for filing gullets between saw teeth. Features a single cut for a smooth and sharp finish.
FYH® BLF207 23KP8G5 BLF Cylindrical Flange Mount Ball Bearing Unit, 1-7/16 in Dia Bore, 3-15/16 in L Bolt Center-to-Center, 15/32 in Dia Bolt Circle, 2-Bolt Flange Flange Mount, 4-13/16 in OAL/Dia
FYH® BLF207 23KP8G5 BLF Cylindrical Flange Mount Ball Bearing Unit, 1-7/16 in Dia Bore, 3-15/16 in L Bolt Center-to-Center, 15/32 in Dia Bolt Circle, 2-Bolt Flange Flange Mount, 4-13/16 in OAL/Dia
