Panel Air Filters
Glasfloss® PTA20201 Disposable Panel Filter, 20 in W x 1 in D x 20 in H, MERV: 1 to 5, 180 deg F, Domestic
The Glasfloss PTA shall be constructed of a single piece of heavy-duty, one piece craftboard frame. The metal grid shall be thermally bonded internally to the frame. The metal grids shall provide an 82 percent open area. All corners shall be closed and sealed. The filter media shall be constructed in a progressively dense fashion from air entertaining to air-leaving side. Glasfloss disposable panel filters shall be rated to withstand temperatures up to 180 degrees Fahrenheit. All filters shall be classified under U.L. std. 900.
Glasfloss® PTA16202 Disposable Panel Filter, 16 in W x 2 in D x 20 in H, MERV: 1 to 5, 180 deg F, Domestic
The Glasfloss PTA shall be constructed of a single piece of heavy-duty, one piece craftboard frame. The metal grid shall be thermally bonded internally to the frame. The metal grids shall provide an 82 percent open area. All corners shall be closed and sealed. The filter media shall be constructed in a progressively dense fashion from air entertaining to air-leaving side. Glasfloss disposable panel filters shall be rated to withstand temperatures up to 180 degrees Fahrenheit. All filters shall be classified under U.L. std. 900.
Glasfloss® PTA16201 Disposable Panel Filter, 16 in W x 1 in D x 20 in H, MERV: 1 to 5, 180 deg F, Domestic
The Glasfloss PTA shall be constructed of a single piece of heavy-duty, one piece craftboard frame. The metal grid shall be thermally bonded internally to the frame. The metal grids shall provide an 82 percent open area. All corners shall be closed and sealed. The filter media shall be constructed in a progressively dense fashion from air entertaining to air-leaving side. Glasfloss disposable panel filters shall be rated to withstand temperatures up to 180 degrees Fahrenheit. All filters shall be classified under U.L. std. 900.
Glasfloss® PTA14252 Disposable Panel Filter, 14 in W x 2 in D x 25 in H, MERV: 1 to 5, 180 deg F, Domestic
The Glasfloss PTA shall be constructed of a single piece of heavy-duty, one piece craftboard frame. The metal grid shall be thermally bonded internally to the frame. The metal grids shall provide an 82 percent open area. All corners shall be closed and sealed. The filter media shall be constructed in a progressively dense fashion from air entertaining to air-leaving side. Glasfloss disposable panel filters shall be rated to withstand temperatures up to 180 degrees Fahrenheit. All filters shall be classified under U.L. std. 900.
Recently Viewed
Fluke® SureGrip™ TL220 All-In-One Industrial Test Lead Set, 6 Pieces, For Use With Electrical Tester
Fluke® SureGrip™ TL220 All-In-One Industrial Test Lead Set, 6 Pieces, For Use With Electrical Tester
Milwaukee® 48-22-2859 Demolition Driver, 11.3 in OAL, Plastic Handle, Chrome
The MILWAUKEE® Demolition Driver features a reinforced full-metal core designed to give you maximum job site toughness and durability. The hammer-ready steel strike cap and 5/16" prying and chiseling tip are the largest in the industry and are designed to withstand the most aggressive demolition screwdriver applications. The forged steel shank offers 2X longer life and features a wrench-ready square design to deliver additional leverage.
36" GRAY FLAGGED POLY PUSH BROOMS-LAG20436>
V144 1-3/4" LARGE CUP PULL-NTL115964 >
MINIMUM PLAIN BORE GRIDFLEX COUPLING HALVES-BRW1080H >
MORSE® 17150 2340 1-Stage Type J Heavy Duty Jobber Length Aircraft Drill, #19 Drill - Wire, 0.166 in Drill - Decimal Inch, 135 deg Point, Cobalt
MORSE® 17150 2340 1-Stage Type J Heavy Duty Jobber Length Aircraft Drill, #19 Drill - Wire, 0.166 in Drill - Decimal Inch, 135 deg Point, Cobalt
