BUMPERS
HOSE REEL BUMPER - REC2HR10043>
Recently Viewed
Reed 05380 Universal Die Head, 1/8 to 2 in Nominal, Quick-Opening Die Head Opening, NPT/NPSM/BSPT Thread
R811 Universal Die Head uses universal dies from REED, Ridgid®, Wheeler-Rex®, Berkley and some private brands. R811 fits REED's 5301PD Power Drive and RIDGID® machine models 300, 535 and 1822. The R811 universal die head offers easy-to-adjust size selection with manual open/close operation, along with die lubrication slots. R811 does not include universal dies, order them separately. The R811 die head holds any NPT, NPSM, BSPT, or Bevel-type REED Universal Dies. Geared Threading Dies: The R65 die is made for easier work with larger pipe and in remote locations. It fits Ridgid® brand 65 geared heads. Like other REED chasers, the R65 is backed by REED's 120+ years of die-making experience, and is made in the USA.
3/8" X 1" MED/DUTY OVAL DIE SPRING-LANSMDO375100 >
MORSE® 22230 1655 Chucking Reamer, 0.501 in Dia x 8 in OAL, 0.4355 in Dia Straight Shank, Straight Flute
Hold bent glass shades onto ceiling light fixtures with these brass finish 1 in lock-up caps. A brass finish and floral design on these two caps add a polished, decorative touch to any fixture. These caps have a 1 in diameter and are tapped 1/8-IP, so theyll meet the needs of common repair and restoration projects.
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Drillco 72A148C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
