INJECTION MOLD COUPLERS & CONNECTORS
MMP-4-6-MB 1/4" X 3/8" Male Brass
1/4" X 3/8" MALE BRASS MOLD PLUG-FTGMMP46MB >
MMBS-4-6-HB 1/4" X 3/8" Straight
1/4" X 3/8" STRAIGHT MOLD COUPLER-FTGMMBS46HB >
MMB-90-4-6-HB 1/4" X 3/8" 90-degree
1/4" X 3/8" 90-DEGREE MOLD COUPLER-FTGMMB9046HB>
MMB-6-4 3/8" -bodyx1/4" -national Pipe Thread
3/8" -BODYX1/4" -NATIONAL PIPE THREAD MOLD COUPLER-FTGMMB64 >
MMB-45-6-HB 1/4" X 3/8" 45-degree
1/4" X 3/8" 45-DEGREE MOLD COUPLER-FTGMMB4546HB>
COILHOSE PNEUMATICS 6352-F 3/8" X 1/4" -FPT Moldflow Connector
6-352F by Coilhose | Moldflow Series Pipe Connector | 3/8" Body Size | 1/4" Female NPT Thread | Straight | Brass
COILHOSE PNEUMATICS 6352 1/4"MPT X 3/8 Male Mold Plugs
6-352 by Coilhose | Moldflow Series Pipe Connector | 3/8" Body Size | 1/4" Male NPT Thread | Straight | Brass
6-253-F COILHOSE PNEUMATICS
3/8"-FPT MOLDFLOW MOLD PLUGS-COI6253F>
6-252-F COILHOSE PNEUMATICS PRODUCTS
1/4" -FEMALE PIPE THREAD MOLDFLOW MOLD PLUG-COI6252F >
Recently Viewed
Proto® JSCVM-22S Ratcheting Reversible Spline Combination Wrench Set, Metric, 22 Pieces, 6 to 36 mm, Polished Chrome/Black
Proto® JSCVM-22S Ratcheting Reversible Spline Combination Wrench Set, Metric, 22 Pieces, 6 to 36 mm, Polished Chrome/Black
Dodge® 124467 206 Normal Duty Pillow Block Ball Bearing Unit, 1-1/8 in Dia Bore, 3 in L Bolt Center-to-Center, 1.69 in Base to Bore Centerline, 4 in OAL x 3.38 in OAH
A setscrew shaft attachment method is the most common means of securing a mounted ball bearing to a shaft and also the easiest to install. The Dodge® mounted ball bearing offering is engineered with a 65 deg setscrew angle. This ensures the maximum grip onto the shaft, especially when using premium cup point set screws with the high quality manufacturing of the Dodge® insert.
Wilton® WL9-14770 800 Series Regular Duty Standard Throat Depth C-Clamp, 3-7/16 in D Throat, 0 to 8 in Clamping, 3/4 in Screw
Wilton 800 series c-clamps are a smart value alternative for clamping applications that don't require as much throat depth or clamping pressure as a 400 series clamp. Each is drop forged and features replaceable Perma-Pads and spindles.
Milwaukee® M12™ 48-59-1204 4-Bay Sequential Charger, For Use With M12™ Battery, Li-Ion Battery, 4 Batteries
Less swapping, more charging. The M12™ four bay sequential charger reduces the amount of time spent changing out batteries, increasing productivity on the jobsite. Its slim design makes it the perfect solution for a bench top, as well as storage and transportation of packs on and off the jobsite. Featuring REDLINK™ Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimize the performance and extend the life of the pack. The charger offers a compact design, integrated hang holes for vertical mounting, and a skip button to select a desired battery.
Browning® 1033182 BK Series Type 1 FHP Sheave, 3/4 in Finished Bore, 3.15 in OD, 2 Grooves, 2.6 in (A)/3.1 in (B) Dia Pitch, 1-3/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Milwaukee® M18™ 48-59-1806 Sequential Charger, For Use With M18™ Battery, Li-Ion Battery, 0.5 to 1 hr Charging, 6 Batteries
The Milwaukee 48-59-1806 is a M18 sequential 6 port charger. The charger holds up to 6 batteries at a time, and charges them sequentially, one at a time. The charger also offers a compact design, integrated hang holes for vertical mounting, and a pass through plug to conserve outlet space. The new unit will charge M18 compact batteries in 30 minutes, and extended capacity (XC) batteries in 60 minutes. With this new six pack charger, users can reduce the amount of time spent changing out batteries, increasing productivity on the jobsite.
